Parametric umbilical passthrough
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric umbilical passthrough with a split nut. You can set ID/OD/length as parameters.
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 172
- Makes
- 1
- Views
- 995
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I wanted to use the K3 style umbilical passthrough on my printers but with my choice of hole size and umbilical diameter so I made this one up.
It is parametric so you can set the OD (hole size), ID (umbilical diameter) and length of it before you export and print.
There is also a allowance parameter that controls how much the threads on the parts are separated to ensure that they will fit after being printed. It's default 0.1mm which should work for most, but if you have a better or worse tuned printer you can change this value. Increase it for a looser fit and vice versa.
I've been asked what thread it is and it's the 10suo special. I just made something up that had 45-ish degree angles so it would print nicely. Patent pending (not really).