1 / 2
Hair Dryer Fan Radiator Mount — image 1
1 / 2

Hair Dryer Fan Radiator Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mounting system for mounting a hairdryer to the radiator in the bathroom.

Rating
0 / 5
Likes
4
Downloads
47
Makes
0
Views
296
Reviews
0

Updated at source:

Model information

Category
Bathroom
License
Creative Commons — Attribution — Noncommercial — Share Alike

EN:

The system was intentionally printed in 2 parts to reduce the use of supports to a minimum. 
Due to the shape, the entire object could not be printed in one without a myriad of supports, so it was split into 2 parts. The joint consists of a dovetail, which was deliberately designed to be relatively flat to increase the stability of the stem. Due to the circumference and the otherwise longer printing time, layers of 0.3 mm were sliced. The cut with dovetail is set to a tolerance of 0.2 mm. This results in a slight discrepancy, which means that the joining of the 2 objects requires a little force. This is intentional so that they adhere well to each other after joining. I definitely recommend using a small hammer to help slide the 2 parts together. It is also important to carefully remove the remains of the supports on the tongue and groove...
The second option would be to print with layers of 0.2 mm, but then you should connect the 2 parts, which can then be easily slid into each other or detached from each other, with some glue. 

Material: ecoPLA Tough (3DJAKE)
Slices0,3 mm
Perimeter: 3
Supports: Yes

You can find other models of the hanger for other radiators at 

https://www.printables.com/de/model/877834-hair-dryer-fan-mount-for-radiators-of-57-82-102mm

UPDATE see: https://www.printables.com/model/1011734-hair-dryer-fan-radiator-mount-remix


vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv

DE:

Das System wurde absichtlich in 2 Teilen gedruckt, um die Verwendung von Stützen auf ein Minimum zu reduzieren. Aufgrund der Form war das gesamte Objekt in einem nicht ohne eine Unzahl Stützen zu drucken, wurde deshalb in 2 Teile zerlegt. Die Schnittstelle besteht aus einem Schwalbenschwanz, der absichtlich relativ flach konstruiert wurde, um die Stabilität des Zapfens zu erhöhen. Aufgrund des Umfanges und der damit sonst verlängerten Druckzeit, wurde mit Schichten von 0,3 mm gedruckt. Der Schnitt mit Schwalbenschwanz ist auf eine Toleranz von 0,2 mm eingestellt. Daraus ergibt sich eine geringe Diskrepanz, welche dazu geführt hat, dass die Vereinigung der 2 Objekte ein Wenig Kraft erfordert. Dies ist durchaus gewollt, damit sie nach der Vereinigung gut aneinanderhaften. Ich empfehle durchaus mit einem kleinen Hammer dem ineinanderschieben der 2 Teile nachzuhelfen. Wichtig ist auch, die Reste der Stützen an Nut und Feder sorgfältig zu entfernen... Die zweite Möglichkeit wäre, mit Schichten von 0,2 mm zu drucken, dann sollten Sie allerdings die 2 Teile, die dann leicht ineinander zu schieben beziehungsweise voneinander zu lösen sind, mit etwas Klebstoff verbinden.
 

Material: ecoPLA Tough (3DJAKE)
Schichten: 0,3 mm
Perimeter: 3
Stützen: Ja

Andere Modelle des Hängers für andere Radiatoren finden Sie unter 

https://www.printables.com/de/model/877834-hair-dryer-fan-mount-for-radiators-of-57-82-102mm

UPDATE unter: https://www.printables.com/model/1011734-hair-dryer-fan-radiator-mount-remix


 

Tags