1 / 2
Hinged Car Seat Headrest Hook/Hanger
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hinged headrest hook for optimal part strength
- Rating
- 5 / 5
- Likes
- 45
- Downloads
- 187
- Makes
- 1
- Views
- 1,443
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Headrest hook with a hinged feature to optimize part strength.
The hinge is made with a 30mm M3 bolt and a (optional) heat set insert. The clearance provided in the model should allow for a smooth hinging operation right out of the printer. The hook can be installed by removing the headrest and putting the mount on the (14mm) headrest bar.
Print information:
- Recommended material: ASA or equivalent (heat/ UV resistant)
- Walls: 4x0.4mm or equivalent depending on your nozzle size.
- Infill%: Any percentage for a proper top layer should be fine, as strength is provided by outer walls