1 / 1
Ender 3 NG Inductive Probe (Omron style) mount.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This allows you to mount an inductive probe front and center on the toolhead.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 401
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
A simple mount that allows you to mount an inductive probe front and center on the toolhead.
There are zip tie mounts along the front rib for securing the cable.
Uses 2, 3mm heat set inserts that facilitate attaching the probe to the mount.
Utilizes the holes that go through ENG-ENG_b.stl (the part that has ENG on it. You will likely need slightly longer 3mm bolts to get them to catch after adding the mount.