Wire Shelf Label Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made to snap into those NFC wire shelfs, and hold a piece of paper for a very simple but effective shelf label.
- Rating
- 4 / 5
- Likes
- 19
- Downloads
- 109
- Makes
- 1
- Views
- 1,080
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Public Domain
I hope this is a very helpful print, in my case its for the store shelves. I needed something that I didn't have to buy sticky labels for every time I wanted to rearrange, and Also wanted something bigger. So I made these, you can just print off a page full of labels, cut them to 33mm and slide them into the label holders.
You may need to scale them slightly in Y or height as viewed when mounted on the shelf. One shelf of mine was a little to tight. Must have been a different manufacturer.
Prints without support, the tabs can break if they're weak, so I recommend 3 walls. I printed mine with a 1.0mm nozzle so resolution is not a problem, go rough and save the time.
You'll need to print 2 with Aligned Pins, and 2 with Offset Pins. If you want to fit the full shelf width. I've also trimmed one down if you don't have a big printer, I'm not sure how many of those you'd need.
Please leave a like and a review if it works out well for you.
Happy Printing