1 / 4
BME280 Sensor Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
BMP280 / BME280 Sensor Case with strain relief for 2-8mm diameter Cables
You need 2x M3x10 DIN912 Screws
This is a composite Part, click on “Split to Parts” in PrusaSlicer and right click on the intended elements. Add the following Part settings to modify:
- add “Infill” with 30% Gyroid and
- add “Layers and Perimeters” with zero Bottom Layers, Top Layers and one Perimeter
or just use the attached .3mf project file
