WLED + ESP32 Holder box with magnet lid. Vol. 2!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The box for WLED controller based on ESP32 based on the ElectroCookie board. Now with a relay, IR, and 2 lines of LEDs.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 51
- Makes
- 0
- Views
- 813
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This model is a box to support enhanced version of DIY LED controller based on WLED + ESP32.
I printed the model using PLA with both Standard and Strength OrcaSlicer settings. It worked perfectly fine. No support is needed.
Disclaimer: You probably don't know what you are dooming yourself to! Please, go ahead and buy a prebuilt controller from DrZzs shop! You will have a well-designed and fully working solution that only seems expensive.
However, if you are fine with some soldering, cutting and fitting… ;)
The project was inspired by Makers Mashup video: WLED & ESP32: The Dynamic Duo of DIY LED Projects.
This time, I added:
- support for a relay that fully cuts the LED power when you switch them off. Here is a nice video that explains the reasons: Extend the life of your LED Power Supply | WLED + Relay + DigQuad.
- support for IR sensor that magically works with any IR Remote control. Here is a video about such a solution: Level Up Your WLED Projects: A Guide to adding Components (no code!)
- support for Logic Lever Shifter. Here is the explanatory video: Logic Level Shifter and WS2812b LEDs
- 2 Data lines. Here are some explanations: LED Setup: Using Multiple Data Pins + WLED Configuration. EASY Setup
To assemble the resulting product, I used:
- 4*2mm Neodymium Magnets from temu.com
- 30W Universal Multi-Voltage Fast Charger from temu.com
- 2 Pin And 3 Pin 5 PCB Mounting Screw Terminal Connectors from temu.com
- 20pcs Aluminum Electrolytic Capacitor 2200UF/16V from temu.com
- 10pcs PG7 Waterproof Nylon Plastic Connector from temu.com
- Teyleten Robot ESP32S ESP32 ESP-WROOM-32 Development Board amazon.com
- ElectroCookie Solderable Breadboard PCB Board from amazon.com
+ Additional
- One Channel Relay Module Relay Switch from temu.com
- KeeYees 4 Channels Logic Level Converter Bi-Directional Module 3.3V to 5V Shifter from amazon.com
- Infrared Receiver Sensor Module from temu.com
- 2 Pin And 3 Pin 5 Mm/0.2" Spacing PCB Mounting Screw Terminal Connectors from temu.com
- 22 AWG Stranded Electrical Wires from temu.com
- 10 Pairs 12V DC Power Connector 5.5mm X 2.1mm from temu.com
