1 / 6
Arturia MiniFuse 1 Desk Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Secure housing for Arturia MiniFuse 1 mounted under desk with 4 screws. All front and back ports are accessible.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 84
- Makes
- 1
- Views
- 651
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Make sure to print the main housing with the lip against the bed (3 small screw mounts at the top). Set supports overhang threshold at 30°.
The main housing is mounted using 4 self tapping screws (7-9 mm head diameter) and the 2 pieces are held together with three small self-tapping screws (2-3 mm diameter).
Printed on a AnkerMake M5C with PLA, 0.2mm layer height, no infill just walls. Took around 5 hours and 134g to print.
Back cover design inspired by Djerrund's model.