1 / 4
Anker 347 Cage for 15mm Rail camera setup
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cage to hold an Anker 347 battery on 15mm rails
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 88
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
I needed something as a stand in until I upgrade to a V mount battery setup, so I made a cage that would hang from a set of 15mm rails.
When I printed it, I printed it laying down with the holes facing up. This caused a problem getting the supports out of the bottom holes, and I had to bore them out a little. I would look at printing it laying down, but with the holes on the side.
The rails will block one of the USB C ports, but I'm only using one, so I did not go back to re-work this. Just a heads up.