Enclosure to LaskakitESP32 e-ink kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement of the original enclosure of Laskakit 4.2 inch e-ink kit.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 24
- Makes
- 1
- Views
- 325
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
I did not like the original enclosure STL, so I designed a new one.
https://www.laskakit.cz/laskakit-espink-42-esp32-e-paper-pcb-antenna/?variantId=13538
It uses two strong magnets glued into the back side of front panel which holds it well on fridge.
Magnet's diameter is 9mm and height 5mm.
Includes safe Reset button and hole for USB-C connector so you can recharge and also update your code without disassembling.
Back panel is snap to lock, but ready for two screws if desired.
I use it for displaying my solar and house power data.
Printed in white PETG, 0.2 layer it looks very clean :)
Enjoy