1 / 2
Par Can 20 Top Hat
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Includes Standard Top Hat for use with ParCan 20 Sized Fixtures.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 24
- Makes
- 0
- Views
- 307
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Top Hat sized for a Par Can 20 fixture.
Most effective when the interior is lined with felt tape. Reduces glare from the front of the fixture.
Recommend using a black PLA for use with LED fixtures and black PETG for use with conventional fixtures.
WARNING:
Since these light modifiers are 3D Printed, some warping might occur based on heat generated from the light source. Use at your own risk.
Print Instructions:
Print with ‘aligned’ seam position (aligned rear seam is usually best) and turn on ‘avoid crossing perimeters’. Prints great on Prusa Mini 0.25 draft presets.