cloud coin bank · magnetic lock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
cloud coin bank lid locks in place with magnets
- Rating
- 5 / 5
- Likes
- 113
- Downloads
- 246
- Makes
- 3
- Views
- 2,134
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Standard Digital File License
cloud coin bank
lid locks in place with magnets
this is a simple design that allows you to easily “throw” coins into the bank with it's angle, and has the top lid locked in place using 4x2mm magnets
you'll need 4 4x2mm magnets to achieve the same result as shown in the pictures and included in the print profile, as well as some drops of super glue to ensure they really stay in their position and don't get pulled away from the slot.
please make sure that you are very mindful of the polarities of the magnet when assembling and gluing in their spots as you want to make sure that each section attracts and not repels the one that will sit above/below
photos shows printed in matte black pla and brick marble pla
- 0.20mm layer height
- 15% adaptive cubic infill
- no supports or brims needed
bambu studio 3mf and STLs included
commercial licence membership available on my patreon
note: all photos uploaded are of the actual printed model, taken inside a lightbox or in home studio