zeropress
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Heat set insert press built from decommissioned Voron v0 X-axis, fitting Stealth Press iron mounts.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 0
- Views
- 229
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v3.0
After replacing the X-axis of my v0 i decided to build a simple heat set insert press out of the old axis and some stuff, that I (and probably you too) had laying around. So, there you go:
BOM (required):
1515 extrusion (min. 35 mm langer than the rail), mgn7 rail+carriage, m2x8 screws+nuts
4x M2x6-8 Screw, 2 M3 Heatset Insert for the arm
1x M3x8 screw + nut for the rail stop
M3x20, 2x M3x8 screws + 3x nuts and 1x 608 bearing for top pulley/mount
Iron Holders:
This design fits Iron mounts from the Stealthpress, so hop over there and grab, what you need.
https://www.printables.com/de/model/609644-stealth-press-heat-set-insert-press
Counterweight:
I am currently using the Press with a bit of string and a counterweight made up of a printed partand 4 AA batteries stapped to it with a zip-tie. You can find the part in the download section.
If you want to go in a different direction, it should be easy enough to fit a keyback, rubber band, belt and motor or whatever you come up with. The pulley and iron mount arm are compatible with strings or 6mm gt2 belts.
BOM (optional):
string, zip-tie and 4 AA batteries for the counterweight
2x M3x16 + hex nuts to fix the legs to the extrusion
2x M3x20 + heatset inserts to fix the feet to the legs
The rail stop was taken from the Voron Zero: https://github.com/VoronDesign/Voron-0
The STEP file can be found in the download section.