RR V-Core 3.4 Toolhead(Vcore 4 to 3.1) w/ Dragon Ace CF Plate & Better Duct
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
V-Core 4 toolhead for V-Core 3.1 with Beacon Mount. Requires Front Tensioners. Plate for Dragon Ace (CF)
- Rating
- 3 / 5
- Likes
- 20
- Downloads
- 155
- Makes
- 1
- Views
- 1,631
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Basically all that I did was bring down the belt path of the v-core 4 to match the belt path of the V-Core 3.1. I have also included the .step file for the Carbon Fiber plate that I am using with a Dragon Ace. If using enclosure, make sure to order CF with an epoxy rated for higher temps. If using the CF plate you will need clinching nuts.
You will also need to reduce y_max by 12 and add 12mm spacers in front of the Y endstop.
These are the clinching nuts you should get to fit properly into the plate.

Also, I have a store, Maybe some goodies you need. https://peedee3d.com/