1 / 3
RR V-Core 3.4 Toolhead(Vcore 4 to 3.1) w/ Dragon Ace CF Plate & Better Duct — zdjęcie 1
1 / 3

RR V-Core 3.4 Toolhead(Vcore 4 to 3.1) w/ Dragon Ace CF Plate & Better Duct

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

V-Core 4 toolhead for V-Core 3.1 with Beacon Mount. Requires Front Tensioners. Plate for Dragon Ace (CF)

Ocena
3 / 5
Polubienia
20
Pobrania
155
Wydruki
1
Wyświetlenia
1626
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Basically all that I did was bring down the belt path of the v-core 4 to match the belt path of the V-Core 3.1.   I have also included the .step file for the Carbon Fiber plate that I am using with a Dragon Ace. If using enclosure, make sure to order CF with an epoxy rated for higher temps.  If using the CF plate you will need clinching nuts. 

You will also need to reduce y_max by 12 and add 12mm spacers in front of the Y endstop.

These are the clinching nuts you should get to fit properly into the plate.

 

Also, I have a store, Maybe some goodies you need. https://peedee3d.com/

Tagi