1 / 3
Voron 2.4 rear exhaust quick release magnetic PTFE coupler — image 1
1 / 3

Voron 2.4 rear exhaust quick release magnetic PTFE coupler

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Twist quick release magnetic PTFE coupler to fit the rear exhaust of a Voron 2.4

Rating
5 / 5
Likes
20
Downloads
69
Makes
1
Views
1,013
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

On my Voron 2.4r2 350 I needed the ability to quickly switch the PTFE tube from the stock spool position on the back to a filament dryer. The magnetic PTFE twist quick release connector by baggins is perfect for this. I remixed the original Voron rear exhaust cover by Fiction to include the magnets to be able to couple the model from baggins directly to the back of the exhaust cover. Added benefit is that the he PC4-M10 Bowden connector was moved to the inside of the printer, so you will have a completely flush rear exhaust without the Bowden connector sticking out.

Bill of Materials:

  • 4x 5x5 round neodymium magnets

  • 1x PC4-M10 Bowden coupler (you can reuse it if you already were using the exhaust cover by Fiction.)

  • PTFE tube. I use cheap 3mm ID, 4mm OD (you can reuse it if you already were using the exhaust cover by Fiction.)

  • At least one Twist quick release PTFE tube connector by baggins. Materials for this are not included in the BOM above. Please refer to the original source for the BOM. Also be aware that the original quad connector from Line Arc Line is different and will not fit correctly. I only used some geometry on my remix

I printed this in Overture ABS, but PLA,  PETG, ASA, etc. will probably also work fine.

If your printer is calibrated correctly the magnets will press fit into the part, otherwise you may need some superglue.

If you have any questions or comments please let me know. Let me know how your print turned out by posting a make.

All credit for the original parts and magnetic coupling system go to the original designers!

Tags