ESP32 CAM case / enclosure / ball joint wall/ceiling mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ESP32 cam case with ball joint wall/ceiling mount based on the modular case and mount created by milans
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 90
- Makes
- 0
- Views
- 1,105
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
My first model ever created and published, so please forgive any novice mistakes.
ESP32 cam case with ball joint wall/ceiling mount based on the modular case and mount created by milans. Thanks for the great
Printing the combined cam case bottom and ball joint screw (esp 32 cam case bottom ball joint screw - dupont power) needs a lot of supports due to its shape. If you don't like it, use the “normal” cam case bottom and print the “esp 32 cam case mount ball joint screw - dupont power”, then glue them together.
Unfortunately, Cura compains about the model not being watertight and mesh tools can't fix it, but it printed totally fine. If anyone could help me fix this, I'd appreciate and publish an update.
The ball joint screw segments are prone to break off when removing the supports or otherwise fiddling with them.
Note while this model is more compact than the original, the adjustment range of camera angles are a more restricted.
Printed in eSun PLA+ at 20% infill, normal supports, brim
Scaled the ball wall mount (not included here, see original) to print at 101%, else it was too loose.