1 / 3
Esperanza Gladiator / other PS3 Gamepad ABXY mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you don't like the shapes, you can replace the buttons with ABXY or XYAB.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 27
- Makes
- 0
- Views
- 245
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution
If you don't like the stock buttons with shapes, you can print your own! The file contains A, B, X and Y buttons, but you can make your own! Remixes are welcome.
How to replace:
- remove the batteries and power off the controller (only wireless models)
- remove 6 screws from the back of the gamepad
- open the case carefully.
- remove the thumbsticks, the rumble motors and the mainboard.
- remove the rubber pads.
- flip the case so the buttons fall out.
- install new buttons (in the desired order)
- repeat steps 1-5 in the reverse order.
- test the gamepad in an online gamepad tester.
- should be good!
If the buttons don't fit in the correct orientation, carefully file down the wider tab on the button so it's slimmer.