1 / 11
ATOMSTACK Cable Chain
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cable management for Atomstack A5
- Rating
- 0 / 5
- Likes
- 39
- Downloads
- 349
- Makes
- 1
- Views
- 1,487
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Open, easy-to-install cable, less flimsy links, snappier clips, and less stiff and more flexible cable chain. I used m3x15 hex screws, locknuts, and washers for attaching to the laser, although the laser hole diameter was 4mm. See pictures for assembly. You will need to print 18 links and 50 clips. I used no links on the X-axis simply because they were not required, and there was no way to connect the cable chain links to allow wire freedom. So, I just used the “X-axis bar.”
Oh, and a couple of 2.5mm zip ties for the X and Y Axis bars.
See extra notes in remix variance below.