X-Shot Longshot - Plunger Tube Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D Printable replacement plunger tube for the Zuru X-Shot Longshot.
- Rating
- 4.857 / 5
- Likes
- 58
- Downloads
- 455
- Makes
- 6
- Views
- 2,113
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple 3D printable tube to replace a cracked plunger tube on an X-Shot Longshot. I recommend printing this with Orca slicer and scarf seams enabled to get the best inside surface finish. Attached .stl file and a .3mf file for use in Orca slicer. The 3MF file is set up for my Prusa Mini and worked perfectly with a great inside finish.
The inside diameter is a bit smaller than stock at 39.5mm and has 1.8mm thick walls. Recommend at minimum coating the inside of the tube in a thin layer of grease, I used SuperLube, but anything plastic safe is probably fine. Also, sanding the interior walls for a smoother finish would be beneficial, however I didn't do this and it works fine.