G0 Barefoot Shoes

Bambu Studio / Orca Slicer settings:

Global, G0-1, G0-2:

• layer height: 0.28mm

• line width sparse infill: 0.9mm

• wall loops: 0

• top shell layers: 0

• bottom shell layers: 0

• sparse infill density: 43%

• infill pattern: Grid

• infill anchor: 1000 (unlimited)

• max infill anchor: 1000 (unlimited)

• infill direction: 0°

• detect narrow internal solid infill: no

• speed sparse infill: 18 mm/s

• reduce infill retraction: no

G0-3:

• infill line width: 0.3mm

• object flow ratio: 2

• infill density: 50%

• infill pattern: Triangles
  

Belt printers settings (Cura 4.9.1 with BeltPrinterSlicing plugin https://github.com/BirthT/BeltPrinterSlicing):

How to design and slice: https://www.youtube.com/watch?v=6ae-rzo_zJM

- layer height: 0.36mm
- infill line width: 0.4mm
- wall line count: 0
- top layers: 0
- bottom layers: 0
- initial bottom layers: 0
- infill line distance: 3mm
- infill pattern: grid
- connect infill lines: yes
- infill line direction: []
- randomize infill start: yes
- infill overlap: 0mm
- infill flow: 300% 
- enable print cooling: no
- generate supports: no
- infill speed: 15mm/s
- initial layer speed: 10mm/s
- number of slower layers: 12
- retraction distance: 15mm (also added wiping movement by postprocessing with the attached Python script*)
- retraction speed: 65mm/s
- retraction prime speed: 33mm/s
- combing mode: off
- relative extrusion: yes

settings modifier (100mm cube, rotated 45° and placed on the back of the shoe to improve initial layers print quality)

infill line distance: 1.5mm

Website: https://www.riverfamily.art/

Contact: [email protected]