CREALİTY K1 MAX TOOL HOLDER
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I saw that there was no good set for the K1 series, so I made it myself.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 170
- Makes
- 2
- Views
- 846
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
I saw that there is no good set for the K1 series, so I made it myself. I will update your print as I shared the photo, otherwise it will be difficult to clean the brakes.
You will need a longer screw.
THE 5.5 MM SCREW IS SHORT, YOU WILL NEED A 8 MM LONG SCREW
If anyone wants to do more, I also shared the SLDPRT part.
04.07.2025
I made a V2 for the stuck screwdriver, the hard to remove needle at the back, the broken mounting hole at the bottom and the falling cutter. I changed the positions of the USB needle hole and the spatula and made the glue hole diameter 30mm (FABER-CASTELL's 40 gram glue is suitable) I used ABS filament because PLA warps over time
THE REST IS DEPENDING ON YOU, PROBLEM-FREE PRINTING FOR EVERYONE :)