Oval Dust Collector Cannister Adapter for 4in (100mm) Fittings
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter that allows a 4 inch (100mm) fitting to connect to an oval cannister filter that is used for dust collection.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
The adapter was designed to allow for a 4 inch fitting to connect to a Filti Nano FR Dust Filter Cannister with open ends. I was able to connect a 4 inch (100mm) hose and all of my Powertec fittings to the inlet with no issues. The dimensions of the base 12.0"x8.75" (304.80x222.25mm), and the height of the inlet is 1.80" (45mm). See drawing for more details. The oval cannister that it was installed on was 14.4" x 11.4", but it can be used for any open end cannister with similar dimensions.
I had to break it up into three prints since the size of my build plate is 11.8"x11.8" (300x300mm). If anyone requests for a model where it is one piece, or needs a 2.5 inch inlet version just let me know.
Assembly does require parts to be glued together. Edges of each part have chamfers to allow glue to create an airtight seal. I used CA glue to connect the two plates together, and used epoxy to glue the inlet to plate assembly (used a 5lb weight for pressure). When bonding the assembly to cannister, I used CA glue in a couple of spots to hold the assembly and cannister together. I then used silicon caulk to create the airtight seal between the plate and cannister.
Print Specs:
| Print Speed | 75.0 mm/s |
| Travel Speed | 100 mm/s |
| Print Temperature | 220 C |
| Build Plate Temperature | 50.0 C |
| Fan | 20% |
| Infill Density | 35% |
| Material | Overture PLA |
| Layer | 0.2mm |
