1 / 4
LowRider 3 CNC - control box case for BTT SKR Pro 1.2 board and a BTT TFT35 E3 touchscreen X-min - 1/4" Struts — image 1
1 / 4

LowRider 3 CNC - control box case for BTT SKR Pro 1.2 board and a BTT TFT35 E3 touchscreen X-min - 1/4" Struts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix changes: v1.3.2 with 1/4" struts mounts on the X-min end. Extended around an inch to accommodate wiring.

Rating
0 / 5
Likes
5
Downloads
25
Makes
0
Views
241
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

This case mounts on the X-min end (left side) of the Lowrider 3 and is about an inch longer than the original. The ports have been adjusted to match up with the board when mounted. 

The SKR board was rotated 180 degrees from the original orientation (main power hub face towards the X-max side). With the board rotated the power hub on the board was close to the edge of the case, which resulted in some nasty bends to get the wiring connected, so I extended the lid/base around an inch to be more accommodating for wiring.

The case extension pushes the wiring for the touchscreen to just about the limit when installing the lid, so I would suggest to slip the lid on first before connecting the touchscreen to the board.

 

 

Tags