Ford Fog Light Mount Piece
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount piece of an older Ford fog light, meant to replace a broken one, since it's only found as a complete assembly.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 233
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This is the central mounting piece for an older Ford (Focus C-Max) with which the fog light is mounted in its housing. This model can't be found as a separate spare part, only the whole fog light assembly is available, as far as some research confirmed.
Both the left and right mounts are uploaded as .stl files, check which one you need before printing. :)
I suggest a .10 or .20 layer height, 15% infill (doesn't really matter with a 0.4 nozzle), and supports on the print bed only (grid support is OK). Suggested print orientation is the top layout you can see on the photo of the 3D printed models.
The commissioned model was printed in PLA, as it is neither directly reached by sunlight, nor carrying a significant amount of weight, but feel free to print it in PETG or ABS if you have the necessary equipment (buildplate and nozzle).
DISCLAIMER: This model is in no way intended for commercial use, it was created for educational purposes only, intended to practice modeling and 3D printing a functional real life mechanical part of a larger assembly.