1 / 5
Hook for double sided tape (parametric Fusion 360)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple hook design for double sided tape. Parametric so you can adapt its dimensions with Fusion 360.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 29
- Makes
- 0
- Views
- 96
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
I wanted to hang my duster in an old cabinet without using screws, so I designed this simple and generic hook.
You can adapt its dimensions to your needs. With the default dimensions (see picture for reference), it does not need supports. As long as the angle of the hook is not set to a value of 45º or lower, there is no need for supports.
I printed it in PETG to withstand the outdoor temperatures and humidity.
As usual, when applying the double sided tape, remember to properly clean the surfaces before.