Counting matching models…
ESP32 2.8inch Touch IPS CYD LCD Screen Case I recently purchase this screen from Ali Express. It has a very unimaginative name "ESP32-2432S028R" which makes it hard to find. For that reason it is also known as the Cheap Yellow Display CYD…
TTGO Lora32 T3 Slimline Case This case fits both 433mhz and 868mhz versions of the boards marked T3_V1.6.1. I have both running on the home IOT. I've included a picture of the boards I have as there are a confusing amount of different…
Snap fit top cover screwless slimline design. Separate top cover files are included - 1 for Zero W and 1 for Zero 2W (cpu is in slightly different position) I found that supports are required to each of the case port openings. I've…
Lilygo T Display S3 AMOLED Case ****************************************************************************************** **Update 20Feb24 ** Added a new top file modified to suit the new S3 which now has a flat acrylic embedding of the…
Raspberry Pi5 PCIe NVMe Case for Waveshare M.2 HAT+ ****************************************************************************************** **Update 21Nov24** There was a small blemish discovered to the button recess. This has now been…
ESP32 4.0 inch IPS LCD Touch Freenove Case This case has been designed to fit the Freenove ESP32 Display FNK0103 4.0 inch 320x480 ST7796 touch screen. It's very similar to the smaller CYD display (2.8inch) It's a nice 320 x 240 TFT screen…
ESP32 5inch Touch IPS LCD Screen Case I recently purchase this screen from Ali Express. ESP32-S3 HMI 8M PSRAM 16M Flash Arduino LVGL WIFI&Bluetooth 5 " IPS 800*480 Smart Display Screen 5.0 inch RGB LCD TFT Module. It's a gorgeous 800 x…
Raspberry Pi 3(B/B+) compact ventilated fan case Compact ventilated fan case with 30mm fan. Snap fit top cover screwless design. Requires 1x 30mm 5V DC fan with fixing centres of 24mm. The fan fits to the top cover with 4x 12mm M2.5…
Glue mixing applicator sticks for epoxy. Seven various glue applicator sticks for epoxy mixing and application. They are 60mm long but they can be scaled to any size required in your slicer software. Quick to print. Printed in PLA with no…
Raspberry Pi 5 PCIe NVMe Case for Pimoroni NVMe Base The case has been designed to house the Pimoroni NVMe Base mounted under the Pi. Four mounting posts are provided to mount the Pi on top and the Hat to the underside. These act as a…
Arduino UNO Q Caddy Tray This caddy/tray has been designed to protect the Arduino UNO Q board. The board is fixed to the caddy with 4x M2.5x5 screws. Printed on 0.2mm PLA, no need for supports. 4x silicone self adhesive feet hold it firm…
Plunge Router Adapter for Makita DRT50 Plunge Base which fits the Parkside Plunge Saw Track. Remove the fitted base plate and reuse the 4x M4 screws to fit the Adapter to the Plunge Base. The Adapter can be readily altered to suit other…
Adjustable Feet for Dremel Workstation 220 Levelling Keeps the workstation in position and level on the workbench. I designed these feet to allow levelling up of the workstation when fitting inserts to printed parts which need to be…
Raspberry Pi 5 and Active Cooler Case, with reset button The objective was to design a sturdy ventilated case that would suit the Pi Active Cooler. The wall thickness chosen in 2.5mm which allows sufficient depth for a recessed panel for…
Slimline case for the Lilygo T Display S3 AMOLED Version 2.0 This design is only for the Version 2.0 variant offered by Lilygo. I have a case for the original T Display S3 AMOLED here :-…
HP Elitedesk 800 G2 Mini - SSD Bushes I recently purchase the above PC only to find that the bushes for SSD or HDD were missing. I think the original HP bushings were made of a hard rubber compound. I designed some new bushings in PLA and…
Raspberry Pi 3A+ Ventilated Compact Case Snap fit top cover screwless slimline design. I found that supports are required to each of the case port openings. I've included STEP files as well as STL to make it easier to modify if required.…
Coffee capsule dispenser / pod holder for Nespresso and compatibles It has been designed to hold one box of 10 capsules although printing several units will allow them to be ganged together side by side as desired If anyone needs a…
Multifunctional Adapter Case for Raspberry Pi5 (& Pi4B Updated)(& Pi4B Updated) **** UPDATE 09OCT25 **** As requested I have Added the file "Multi Pi4B Case v46" which suits the Pi4B Eth and USB connector arrangements.…
Fixed Base Router Adapter for Parkside Track and Makita DRT50 Remove the fitted base plate and reuse the 4x M4 screws to fit the Adapter to the base. The Adapter can be readily altered to suit other manufacturers tracks. Printed in PLA at…
Quick clamp Plunge saw adapter for LIDL Parkside track *** Update 19May24 *** The track clamp had a failure when cutting down a door so it has been redesigned as Version 2. This now has side flares to strengthen the body significantly.…
Wall Cradle Bracket for Sonoff 02LD Temperature Sensor & Probe. I recently purchase the SONOFF SNZB-02LD IP65 Zigbee LCD Smart Thermometer (Probe Version). With the probe attached to the boiler flow pipe the temperatures can be monitored…
Small Picture Frame with hinged rear stay Visible picture area 73mm W x 95mm H (2.88" x 3.73") Rear stay hinge leg is print in place (hinge will work after printing) then stuck on to back plate. I used Bostik which makes a strong bond to…
Raspberry Pi 5 PCIe Sleeve Style Case for Pimoroni NVMe base The case has been designed to house the Pimoroni NVMe Base mounted under the Pi. The case comprises the sleeve case top and bottom sections, sd end and usb end panels, 4x…
Arduino UNO R3 with 433Mhz HAT Case Enclosure The objective was to design a simple ventilated case that would suit the 433Mhz HAT mounted on top of an Arduino UNO R3. The HAT was obtained from Jonathon Oxer (Freetronics) and comprises a…
Dishwasher Salt Filling Funnel Designed this funnel to fit our NEFF dishwasher as it didn't come with one provided. It makes filling the dishwasher with salt an easy job. It may well fit other makes as well, don't know but the tank filler…
Raspberry Pi5 PCIE NVMe Case for 52Pi NVDAC HAT The case has been designed to house the 52Pi PCIe NVDAC HAT audio expansion board mounted over the Pi 5 Active Cooler above the Pi 5. The 52Pi hardware kit includes 4x M2.5 x 17 Brass…
Raspberry Pi 5 and 2280 NVME SSD Cooler Case The case has been designed to house an NVME drive mounted under the Pi. The available drive I had was a 2280m, being 80mm, which is longer than the case length, so it protrudes a bit. (I intend…
Battery Terminal Cover / Protector for Canon BP511 camera battery Battery slides in and locks in place for safe storage. Protecting the battery exposed terminals for safety. Printed in PLA at 0.2mm and without supports on a Prusa Mini+.…
Raspberry Pi Skeleton Fan Cooled SSD Caddy Suits Pi 3B, 3B+ and 4B Spider style top with centre mounted 30mm fan mounted on top of the Pi sitting above an SSD Caddy. The Spider top is supported on 4x 3D printed 16mm high vertical support…
Tiny Voltmeter Case I designed this case to suit the miniature LED voltmeter displays readily available on Amazon and Chinese sites. This is the description from Amazon. 0.28 Inch Mini Digital Voltmeter with 7 Segment LED Display 2.5V -…
Wire Spool Caddy for 55mm x 21mm Wire Reels This caddy has been designed for the 55 x 21 wire reels available on Amazon. The holes for the wires are 1.5mm which should suit a range of popular sizes. I use 24AWG and the slot beneath is to…
Multifunctional Case for Raspberry Pi5 with HDMI and Ethernet boards The case has been designed to house the following three boards. - Raspberry Pi5 - Waveshare Connector adapter with full size dual HDMI with 4K HD output. - Waveshare…
A replacement case / sleeve for small digital DC voltmeter ammeter display. I have one of these small digital panel mount displays that only comes in black plastic. I designed a replacement case / sleeve for it so it could be printed in…
The original ESP-12E pogo pin programmer by GregFrost works very well. I added a small base for it as attached files. Fusion 360 file is included as well as the stl. If you need a STEP file let me know. Hope this helps someone.
Raspberry Pi 5inch Touch Display2 Stand The support legs have been designed to suit the Raspberry Pi 5inch Touch Display2. https://www.raspberrypi.com/products/touch-display-2/ The screen has been set at an angle of 60 degrees which I…
ESP32-CAM Lens Adjusting Tools for OV3660 These tools are for breaking the lens factory glue seal and also adjusting the lens focus. The ESP32-CAM lens comes glued in place from the factory. I found it very hard to break the glue bond…
Bench Stand for Aneng Smart Multimeter 681 The multimeter is not supplied with a rear stand, as is normal, so I designed this small stand for it. Printed at 0.2mm with PLA. I've included a STEP file as well as an STL so alterations, if…
Dishwasher Salt Filling Funnel with Twist & Lock Designed this funnel to fit our NEFF S727P70Y0G/07 dishwasher as it didn't come with one provided fo the machine The funnel will locate itself in the dishwasher filler neck (see pictures).…
CH347 USB Programmer Caddy / Tray This caddy has been designed to protect the CH347 on the workbench Printed on 0.2mm PLA, no need for supports. Small strips of double side tape secure the device. I've included a Step file as well as the…
CH341A USB Programmer Caddy / Tray This caddy has been designed to protect the CH341A on the workbench Printed on 0.2mm PLA, no need for supports. Small strips of double side tape secure the device. Also included is a version with the…
These are all currently available results.
