Counting matching models…
Used in a Voron 0.2 setup with: Dragon Burner BTT EBB36 CAN board - **warning**: not compatible with max31865 for now! Sherpa Micro extruder BOM: 2x 25mm aluminum standoff 4x M3 x 6 mm BHCS 2x M3 x 10 mm BHCS 2x M3 x 4 x 5 mm heat insert…
A replacement for the panel near the XY motors. Instead of the regular Voron 0.2R1 umbilical, you can use a PG7 for CAN. It also features a recess for RGB wires (e.g. Daylight/Disco On A Matchstick) and a hole for a 4 mm PTFE tube. CAD…
These were tested with Shush and Alpine MotoSafe earplugs. They were designed to mimic the tool that comes with the Alpine MotoSafe earplugs, as I've lost that tool. Warning: Use these at your own risk! If the print quality is subpar or…
When you use ZeroClick with the Dragon Burner on a Voron 2.4, you can use this probe dock. Rotate 180 degrees along Y before printing. This probe is based on one of the official ZeroClick docks which is licensed by the GPL . CAD source
This fits on the back of a Cockroach 3" frame so you can mount a RushFPV Cherry antenna in it. The antenna will be mounted at a 45 degree angle. I've tested it with the MMCX variant, but I'm sure it'll also work with the UFL version. The…
DIN bracket for https://www.makerfr.com/en/cnc/grbl-32bits-board-v2/ I printed it with PETG.
The Nunchuck gets a nice "click" when you push it in. My display display placement was a bit crooked: both the LCD panel on the PCB and the alignment of the display PCB with the main PCB. Because of that, there is a bit of a gab and the…
Warning : Assembly requires basic soldering and electrical skills. Features: Size of 78 x 63 x 24 mm (which is smaller than the [Racebox Mini S]( https://www.racebox.pro/products/racebox-mini-s ) at 82 x 72 x 25 mm) Houses two 16340…
This fits the wider rubber part of the brake line that is 14 mm in diameter. I tested this with HEL brake lines on a GSX-R600 K8. It requires: A 4x1.5 mm zip tie (or smaller) Two rivets: it's designed for a 3 mm rivet, but it might…
This adapter fits inside the throttle switch box housing on the right side clip-on. If the model doesn't fit well, you can make a copy with OnShape, and adapt it there . Warning Use this 3D model at your own risk. The author is not…
These are all currently available results.
