Counting matching models…
I’m sharing a bottle handle model that I designed over four years ago and have been using ever since. Files to Print: Handle: 1 pc. Hoop: 2 pcs. (Choose hoop_38.5mm for a 5L bottle or hoop_46mm for a 6L bottle.) Nut: 2 pcs.…
Reduces the inverter temperature and prevents the buit-in (and noizy) cooling system from activation. No additional mounting required. No supports required. Hardware: 4 pics 92x92x25 fans (e.g., NF-B9 redux-1600 PWM ) 4 pics M5*12 bolts 4…
The mount allows you to quickly remove the camera to prevent its battery from overheating or to protect the camera from theft. Note: I am using a brand-new camera with adhesive tape still on it; it has not been tested without the tape.…
Use double-sided tape to attach it to the surface; I used acrylic double-sided tape. Print vertically as shown in the image. GOOD BED ADHESION ( and a brim) IS REQUIRED. For use in high-humidity environment, it’s better to print with a…
Designed for Samsung Galaxy Tab A9 LTE (X115N). Allows to easy remove the tablet. Secure the mounting with double-sided tape. Supports required.
Description: This is an enclosure designed for an RS485 sniffer used to enable communication between the JK inverter BMS (JK-PBx BMS) and ESPHome/Home Assistant via ESP SERIAL (UART-TTL) + SERIAL TO RS485 + ETHERNET CABLE, as part of the…
UPD: this is a bad design, 4 x 92mm straight fans work much better. Use this one Helps reduce the frequency of active cooling cycles during high-load periods. Useful when the inverter is installed in confined spaces or areas with poor air…
This model lets you securely clamp STRUT channels together using an M10 threaded rod avoiding deformation. Tested with 41×41×2mm STRUT channel. Since profile shape may differ, print one model and test the fit. 4 perimeters and 20% infill…
There are two versions, with Mitsubishi logo and without.
These are all currently available results.
