Counting matching models…
There are many radiator boosters. This one is for radiators with 140 mm inner width and 120 mm fans. You can use up to 4 radiators. The booster consists of two components: controller holder (need 1 print) fan holder (need 1 to 4 prints)…
Case for BigTreeTech HDMI5 display V1.2 with outlets to the back. Different mounting options. The backplate has different mounting options for landscape or portrait in different positions. Just chose the screw holes for your needs. You…
osVAC neo adapter DN40 to M32 osVAC neo adapter DN40 to F32 DN is parameterizable (35 - 45) using Fusion 360 Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: No Supports: No Resolution: 0.3 Infill: 50% Filament:…
osVAC neo adapter M32 to DN40 DN is parameterizable (35 - 45) using Fusion 360 Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: No Supports: No Resolution: 0.3 Infill: 50% Filament: Geeetech PETG white…
I ported the original arduino software by werner_rh for an Wemos D1 Mini because I wanted to monitor the drying sensor data with grafana. Therefor the sensor data is transmitted via mqtt an transered to influxdb using telegram. The…
Dryer for Source Deuter hydration bladder 3l Version 1 as shown in the photos without step at the dryer's foot. Verision 2 with step at the dryer's foot for stabilized standing and better ventilation. Print Settings Rafts: No Supports:…
This is a connector for osVAC neo (osvacneo.de) (M25 or M32) to DeWalt™ AirLock™ compatible twist-lock machines. I used it for my DWE6420 Orbit Sander. Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: No Supports:…
Unterteil für Opel PSA Fußmatte Clip Print in PETG 0,2mm no support Infill 50 % Gyroid V3: No need for scaling like in V1. V3 has optimized threads in “Oberteil v3.stl” and fits to “Unterteil v3.stl”. V1/V2: When using “Unterteil.stl”…
Plate to mount something (e.g. HDD, Raspberry Pi etc) with cable ties to a VESA 200 mm connector at the backside of your device (e.g. TV). Screw holes are 8 mm; you need at least 4 M8 x 25 screws. Can be used for M6 screws as well.…
Camera mount fits to the right side of the X axis and travels up/down on Z axis of Elegoo Neptune printer series. I originally designed it for my Neptune 3 Pro, but should also fit to other printers like Neptune 3 and Neptune 4. Please…
Camera mount fits to the right side of the X axis and travels up/down on Z axis of Elegoo Neptune printer series. I originally designed it for my Neptune 3 Pro, but should also fit to other printers like Neptune 3 and Neptune 4. Please…
After refilling your Litter Locker some times the original lid doesnt fit anymore. The replacement lid I designed has some hooks to snap in to the original cartridges edge. Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3…
Anzuchttöpfe für die in den Garten- und Baumärkten erhältlichen Zimmergewächshäuser. Die Töpfe haben unten ein großes Loch mit einer losen Scheibe darüber, so dass man die gezogenen Pflanzen einfach mit dem Finger nach oben rausdrücken…
Solves the problem of the not storeable cuttings collector of an Einhell hedge trimmer. With two of the clips it is easy to mount the collector on the blade cover. Use a semi elastic filament like PETG.
Use strong double sided adhesive tape to mount the clip at the bottom side of your kitchen cabinet (I used "Pattex kleben statt bohren"). In the Clip you have five slots. To of them are made to slip the Deuter/Source Bladders in. The are…
12 mm flat inlet for vaccuum cleaner 35 mm hose
Box for 15 pieces LR44 or AG13 battery cells Print in place hinge with tolerance 0.4mm. Tolerance can be changed by parameter in Fusion360. Print recommendation: PETG 0.2 mm layer height 4 wall lines 30% infill grid After printing: let it…
Replacement tool adapter for Ferm biscuit joiner to osVAC neo M25 or M32 Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 50% lines Filament: Geeetech PETG white Notes:…
Spare part for Helios AE Hygro Print in PETG 0,2mm Layer Infill 50% Gyroid or 100%
Purpose: To protect and stack your different wet stone grinders. How to parameterize: measure length and width of first wet stone (optional with or without rubber protection attached) ==> note as "lower measurements" measure length and…
osVAC neo adapter: M32 to Dirt Devil Centrixx Be careful not to break the flexible hooks. Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 50% Filament: Geeetech PETG white…
Do not use this model, use this updated one instead: https://www.printables.com/de/model/770516-osvac-neo-m32-to-dirt-devil-centrixx The walls here are to thin and may break.
These are all currently available results.
