Counting matching models…
I couldn't find a good angle grinder disc holder that printed without supports, so I put this together. Print on the flat bottom and it should work without additional supports. Any filament will work, but I use PETG as the default for…
PETG recommended for strength and flexibility at 20% infill with 4 perimeters. (Some petals snapped with less infill.) No supports needed. Mounts horizontal or vertical, including the underside of a shelf or on the ceiling, depending on…
PETG or harder recommended. No supports needed if you print thread side up, but I used a brim for stability. This thread works with many (most?) household vacuum hoses. I harvested an old Eureka hose (the black one pictured), an ancient…
IMPORTANT! I heard from a friend that his set were loose, and asked him to show me. Turns out he was using an entirely different set of screws. This was dangerous on his part. Remember that using power tools can be dangerous, even life…
Extension for Hamilton Beach Dehydrator Model 32100A or the Westside GameKeeper model mentioned in the Makes. 258x330mm tray fits most 1kg filament spool as well as larger food items, mushrooms, and flowers. No supports needed! Print…
Dryer spacer for Camelbak or similar water/dromedary bag. Don't like your bags get slimy and moldy!
Print in place concave fiber diz that requires no supports. Print flat side down on the build plate. Holes are 3, 5, and 7mm. Print 0.1mm layer lines. with a 0.4mm nozzle. I'd recommend using a deburring tool in the two larger holes to…
I printed about 50 of these, with a total filament/material cost of just over $100. This will save our Pack several hundred dollars a year. Get started early as it can take a few weeks to print them all. Any tips received for the model go…
Arrowhead and fletching for standard-sized round toothpicks; designed as companion prop for specialty "Poison Arrow" cocktail/mocktail from the book: Düngeonmeister: 75 Epic RPG Cocktail Recipes by Jef Aldrich and Jon Taylor. I used this…
Will likely work with more DeWalt miter saws than the DWS779 I have, but YMMV. PETG or harder recommended. No supports needed if you print thread side up, but I used a brim for stability. This thread works with many (most?) household…
2" depth gauge or protrusion gauge for Bowl Gouges. Works with Wolverine Vari-Grind or Ellsworth Sharpening Jigs. Has embedded 6x3mm disc magnets to snap onto any ferrous metallic surface. Use a layer stop or color change setting in your…
Stackable or wall-mounted organizers for extra chuck jaws. Prior to this, all my chuck jaws were loose in the same box. Models fit most jaws for Nova chucks : Original Scroll Chuck, Nova Lite G3, SuperNova2, Titan III, etc. I also made…
PETG recommended for strength and flexibility. IIRC, I used a #8 or #10 screw as the spreader. The kids used the trim on my 2014 Subaru Outback as a step, and broke off several of the plastic mounting cams that hold on the side trim. As…
I recently replaced my plastic 4" (~100mm) blast gates with cast aluminum gates from Powertec , and I needed wall mounts for a few. The blast gates I used are just under 11mm in the slot, and the 3 bolt holes are 77.5mm apart. Included…
Disc air intake cover for a common form factor of cast iron combination belt/disc sanders with a 6-inch disc. My model is an older Ryobi BD4601, but if you have a similar model, and the under-table intake looks the same as the last photo,…
I couldn't find a wire/cable strap that was this small, so I modeled one. Ideally use ASA for its superior UV resistance, but PETG will be okay not in full sun, and even PLA may be fine for interior use.
Notched wing tip for a GFAK "Storm Series" stunt kite, but probably fits more brands. It slips on any 5mm rod. Notch is deep enough to fit 2 elastic cords if needed. Scale to fit your kite. Note: My 3MF and Gcode have an interior brim…
Adaptor: garden hose (GHT/NHT 3/4-11.5) male to small shop vac female. You could use this to connect a wet vac to a garden hose. I use it with a cast-off water balloon filler as a vac attachment for small parts drawers. The kids sometime…
Mount to stabilize the galvo-style LaserPecker 1 on a drill press Jacob's chuck. Easier to manage focal distance and avoid bumping the lightweight tripod it ships with. Optional “flex pad” model can be printed in TPU or another material…
Store bought 4" dust collection fittings are ridiculously inconsistent in size. I have two very similar dust hoods with different ODs, and I made this adaptor primarily so I could use them both with my Rockler DustRight “QuickConnect”…
T-slot turn screw/flange that allows you to use a cheaper (big box store) HEPA filter made for the other, louder brand of shop vacuums on a Fein 9.77.25 Dust Extractor. (Please comment if this works for more brands or models, and I will…
Hunter Douglas PowerView Hub Mount. Open front remix of @3DMason's original mount. Substantive change to allow mounting without unplugging in any orientation. Editorial changes to allow for printing without supports.
Set of tactilely distinct, radially symmetrical glue-on tiles for Rubik's-style 3x3 puzzle cubes, pyraminx, etc. intended for blind, colorblind, or low-viz cubers. Printed in PLA. No supports needed. I made this for a blind colleague of…
Replacement for the crumbling 33-year-old plastic cover of an otherwise good belt buckle in my camper van. My van is a 1990 Ford Econoline, but I think this particular belt buckle was an aftermarket part put in by the van conversion…
Offset bracket/clamp for parallel ~35mm and ~50mm pipes, using a single 100mm hose clamp. If you're putting this on a roof like I did, printing in ASA is best due to its superior UV resistance... PETG might be okay, but don't bother with…
Minimal through-bolted mount I designed for my Robust live center and ring drive center attachments… https://www.turnrobust.com/product/live Also fits similar ¾-10 centers by OneWay, Savanah, etc. The weight is on the through-bolt or wood…
Threaded hose adaptor from a common shop vac hose size 1.625" (1⅝", ~41-42mm) OD to a smaller random size 1.5275" (~1 17/32", ~38.8mm). In my case, I needed to go from a smaller hose for this “Shop Nation” miter saw dust adaptor to a more…
Stackable or wall-mounted organizers for extra chuck jaws. Prior to this, all my chuck jaws were loose in the same box. Models fit most jaws for VicMarc 120 chucks , or VicMarc 150 chucks . I also made another version for VicMarc VM100…
Stackable or wall-mounted organizers for extra chuck jaws. Models fit most jaws for VicMarc 100 chucks . I also made another version for VicMarc 120/150 chuck jaws , and a version for Nova 100mm chuck jaws . Notes: Print the mount in PETG…
My daughter had a special request, to 3D print some dumplings for her friend's toy lizard. Unfortunately, none of the existing models I found would scale to dollhouse sizes. So I made this original model. The carton walls are 1mm thick.…
Grate or vent for dust collection hoods you might use behind a lathe or miter saw. Mine is sized to fit a PSI Woodworking “Big Gulp” dust hood that mostly I use on the lathe or behind my belt sander, but this might work for other hoods…
This replaces the plastic screw that fills the extra roof rack hole for 2014 Subaru Outback... It keeps the leaves and gunk out when you're not using that mounting position. Safety note: this is not a replacement for the load-bearing…
A black neighbor kept having their BLM sign vandalized. Literally dozens of times. Regardless of your political views, the vandal was at best damaging personal property in an attempt to suppress free speech. Anti-democracy fascist. F—…
Wall mount (or desk stand) for Scout Pinewood Derby cars. Use plain or with a custom nameplate. This one works with the same name plate models as my Scout Pinewood Derby upright trophies , or make your own with a CNC or sticker machine.…
TPU/FLEX rubber foot for a common OEM model 1x30 belt sander. Mine's a Central Machinery unit (Model 58359) from Harbor Freight, but Grizzly (Model H3140), Electronix Express, and other manufacturers appear to have the same OEM model.…
Clip to hold and lock together Ikea Antonius basket towers.
Flexible earmuff-to-head-strap connection plug for TR Industrial (and similar OEM) earmuff hearing protection cans. Print in TPU/Flex on a texture-coated spring steel sheet. Orientation and support settings included in the 3MF if you…
T-Stop insert for bungee cord like the gear rack on my Lifetime-brand kayak. Also works for tarp grommets, etc. An old bungee broke on the kayak gear rack, and I couldn't find replacement metal t-stops to order. Paracord Planet has some…
Remix of a mount by @another_variable on Thingiverse. Substantive changes (open front) to allow unmounting without unplugging, and editorial changes for better printability and fit. Print vertically as oriented in the 3MF, and no supports…
Leg lock for antique metal card table since the metal springs have aged. This locking insert prevents the metal spring from slipping back into the unlocked position. If your old card table leg looks like this, it will probably work for…
These are all currently available results.
