Counting matching models…
When I saw the Jonsbo N1 I wanted to create a (mostly) 3D Printed version. I've already made some modifications from the last time I took photos. But since this ITX board I have doesn't work, I didn't see the need to waste more filament.…
My dog destroyed the inductive charging cover for my charger for my Philips Sonicare toothbrush. Made a replacement
Quite simply this allows you to mount the raspberry pi on the back of a monitor and still use the VESA holes for mounting the monitor. I made this to hold a Raspberry Pi running MagicMirror between a 24" monitor in Portrait position and a…
Nothing special here. Just a wine bottle holder. Make sure to print with extra walls in the shell and use a harder material (PLA seems to work, but I wouldn't take the risk.)
Remixed from design on Thingiverse. I made this design half the thickness and added chamfers to two of the sides to direct some airflow. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Extended Supports: No Resolution: 0.2…
Simple spacer to raise up a VIVO monitor mount using the C-clamp attachment.
This is a Corne v2.5 PCB from Keebmaker (originally by foostan) https://www.adafruit.com/product/805 for the switch https://www.amazon.com/dp/B08214DJLJ for the battery I've added 10 & 15 degree tents as well. I used M2.5x10mm screws,…
I've always thought the Gravity Spoolholder by @MichalFanta was a great idea, but I was content with my regular spool holder. Then I saw @Steven_36896 's design and I thought it would be great to put that on the frame of my MK3S+ to save…
Remixed print from Thingiverse. I just opened up the ventilation area more from the the original design. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Extended Rafts: No Supports: Yes Resolution: .2 Infill: 10% Category:…
Simple corner brackets to mount a piece of acrylic sheet to the wall to use as a dry-erase board (whiteboard)
Print with PETG or other material that is more temperature resistant, at least for the Top piece, since it is hit by the fan exhaust. In the slicer (Cura), I set Top/Bottom Layers to 0, Infill Multiplier to 2, and Extra Walls to 2. Should…
I am using M3x10mm SHCS for this design. You should be able to use longer (maybe 20mm?) since it threads into a thru hole.
The Hinge design I've been using kept breaking, so I modified it to use M4 x 25mm screws for increased strength. Remixed from this design: https://www.thingiverse.com/thing:2494261
There are holes for 4 different locations to place 3.5" drives in different configurations of the SSUPD Meshroom V2. The two upper locations are not mentioned in the manual. One of these upper locations cannot easily be used due to a…
Can use M3 nuts and M3 bolts from 16mm to 30mm in length. The mesh is from the slicer settings: set the top/bottom layers to 0, infill at 6.5%, infill line multiplier at 3. Adjust based on preference.
This is printed out of TPU for a softer foot. I use M3 x 10MM Socket Head Cap Screws.
I previously made a dock for my Sony Xperia XZ1 in the same way. ( https://www.thingiverse.com/thing:3021838 ) So I made one for my OnePlus 7Pro. This dock fits with the phone and the clear case that comes with the phone. Video:…
I really liked this design: https://www.thingiverse.com/thing:2526696 But I designed this piece to prevent the (slim) chance of the enclosure falling backwards.
Made holes larger and added counter bore for M3 nut so you can securely tighten fan. Category: 3D Printer Parts
Modified this to hold a female DC connector as well so I could use it for this project: https://github.com/fmalekpour/OctoPrint-Cooldownfan Modified from: https://www.thingiverse.com/thing:1726120
Phone dock for XZ1 with case. clamping it to something so you can put on and pull off with one hand. Dock is split in half to accommodate the cable, then the C-Clamp holds it together while the desk clamp holds the whole thing to the…
Modified to just be a support for the Raspberry Pi if you simply want to have a spot for the Raspberry Pi.
These are all currently available results.
