39 models
About The Minimalistic Xbox Controller Stand by @agepbiz is quite nice. It offers a nice positive placement feel of the controller into the stand. It's also super minimalistic and perfect for modification. I was able to add slots for six…
Wall mount for a bicycle pannier bag (like Ortlieb). The mounts allow you to store or load panniers off the bike. Mounting keeps the panniers off the ground, which reduces abrasion on the fabric and prolongs the bag's life. It also keeps…
About This VESA plate allows you to mount a compatible monitor or TV in a bicycle workstand. Its clamping area is a 36mm “tube-section” that fits neatly in the jaws of the workstand with no sharp corners. The top-end is filled so that it…
These two cases fit a Gopro Session action camera. The split design allows you to more securely clamp the camera in position, using the Gopro mount as the clamping mechanism. Both designs tightly fit the camera. Holes for the microphone…
This is a GoPro adapter that gets epoxied to an existing Garmin mount. I'm using it to hold my headlight under my Garmin device. Print with 100% infill, to make it strong, so it doesn't break. Category: Sport & Outdoors
Updated 2023-12-17: Added a version for the iPhone v11/12/13/14. This size is useful for your desk so you can see notifications easily. We have a few of these spread around the house as they are handy for setting up phone anywhere for…
Simple cases for a Raspberry Pi 3 Model A+ . The design snaps together, and doesn't require any screws or fasteners when used with the lid. You can optionally use screws to fix the Pi to the main case. This pi-part is useful to gauge…
This is a spool holder that mounts to the back metal plate of a Makerbot Mini, to hold much larger spools. Only three parts are needed, and they can all be printed on a Mini, and snap together for a clean look. There were other great…
Flashlight mount for Nerf N-Strike blasters. This prints well from a Makerbot Mini, and fits snug, with confidence that it won't come loose. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator Mini+ Rafts: Yes Supports: No…
Looking for a clean place to put sponges or soap to dry, I had a hard time finding something that was simple and clean. This is a refinement of my original design and builds on learnings from the first version: make it easy to rinse clean…
With the original Prusa Lack Enclosure working well, I wanted to route my filaments similarly to how they were setup with the MMU2S previously, but now with an internal RMU MK3 buffer and an upgraded MMU3 with less friction. The…
About The Minimalistic Xbox Controller Stand by @agepbiz is quite nice, and wall mount version by @Marunknedl_3636249 shows how versatile the original design is. This remix adds slots for six AA batteries so gamers don't have to go…
A printable version of the Raspberry Shake enclosure found here: https://shop.raspberryshake.org/product/raspberryshake-box/ It prints easily. Be sure to add supports, not just on the build plate. Category: Physics & Astronomy
This is an adapter for a Light & Motion Taz bicycle light, to fit a GoPro mount. Here's the Taz light: http://www.lightandmotion.com/choose-your-light/taz Print with 100% infill, and 2 shells to make it pretty much solid, to maximize…
My touring/commuter bike has run out of handlebar space, with a bell, Garmin mount, and cross-levers already installed. To mount I light, I had to forfeit a place for my hands and just wrap the light around the padded bar-tape. But I kept…
The v3 lens focus can be adjusted remotely in software using Prusalink, which makes it a bit easier to setup. I choose the v3 NoIR camera so I can optionally run it with IR lighting and not be bright at night during long print jobs. I've…
Design Intent This Hallowtech II style bottom bracket tool is designed to fit a Praxis M24/PF30 Bottom Bracket , which has a 44mm outer external diameter. This Praxis bottom bracket has an expansion ring to prevent it from moving…
Revel Bedtrack Smoothies Here's a demo: https://youtu.be/f374Q\_momYc Make your Winnebago Revel's garage safer with these bed smoothies. They were designed for use with the GLSS, but also work without the GLSS, so they don't catch and…
The thick walls may seal better against o-rings in fittings. Print in PETG or ASA for outdoor UV protection. Print with 100% infill, or lots of walls/perimeters. Useful to blow-out the water lines for the winter. Set your compressor to a…
This adapter allows you to mount a sliding GoPro plate to a tripod with a captive nut. Recommend printing at a bit higher resolution (<0.20mm/layer) than you normally would, in order for the GoPro plate to print nicely at an angle. I used…
This part can be used as a replacement for the brittle OEM version on a VS30 / W907 Sprinter. I broke mine while installing rear speaker wires, couldn't find a replacement, and so created this one. I have used two of them on my van. They…
Really great model, and I wanted to add a lip to the edge of the curved headphone "hook". This just riff's on dangerousf00d's model by adding the lip. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator Mini+ Rafts: Yes…
I couldn't find a mount for a PM2 online so I designed my own. This let's me have handy access to see my phone while rowing on a Concept 2 rowing machine. The spring clip holds the phone steady under the rowing machine's vibrations.…
The Digiloom ships with 2 shuttles, and 8 colors of weaving string. Why not put all of the string onto it's own shuttle though? I set out to create 6 more shuttles so my daughter could spend more time making, and less time winding string…
Here’s my photolog of how I solved a sunroof-meets-Thule problem with 3D printing and mold making. My wife’s Mazda 5 has a Thule roof rack mounted on factory hard points. When she tries to open her sunroof, the window hit the rack bar.…
About This holds a magsafe-capable phone on a head unit handlebar mount (Garmin or Wahoo). A magsafe phone mount is sufficient to hold a phone on a bike while riding an indoor trainer vigorously. The phone can be charged by the magsafe…
Gain another mounting location for a light or bike computer by replacing your bicycle's stem cap with this part. The mounting tube is 31.8mm - the same size as many modern bicycle handlebars. Similar to Paul's Stem Cap Light Mount , but…
This mount places a Nest Camera Indoor (2nd Gen) upside down on a window frame. It could be used anywhere on the window frame, but I specifically didn't want it to fall off from up high. It is held to the window in our home via Command…
Replacement handle fits Fenwick 5.7 boxes sold in the US in the late 1980s. It may fit other models of tackle box if you scale it along the correct axis (along the width of the handle). Recommend printing with ASA so it's slightly…
This stand is designed to utilize the IKEA NORDMÄRKE for wireless charging on a bedside table or desk. Horizontal and vertical orientations allow you to make use of your phone while it's charging. Cutouts for the camera and buttons keep…
This is a replacement grinder lock for the Melita Mill and Brew coffee maker. I've had this coffee maker since 2003 (over 14 years), and really like the flavor of coffee it makes. Everyone that tries it says "wow, that's good coffee".…
Hot glue this plate behind the holes, and then you'll have a surface to stick/glue your round magnets onto.
This part was included as a gift, along with a Park Tool AWS-8, to some of our longtime cycling club members that are moving away. We gifted a tool along with a trophy to each member. The AWS-8 tool fits in the pocket in the seat and…
For those attending the Open Hardware Sumit 2026 in Berlin , this plate to protects your shirt from the solder-y metal bits on the back of the SOA badge. Snap it over the back of your PCB so it doesn't scratch the wall, or pull your…
Created for sizing another assembly, this is a simple model of a Park Tool AWS-8 bicycle Y-wrench with 4/5/6mm ball end keys. Measurements were taken using calipers, and are +/- 0.2mm. It was created to estimate the position of the tool…
PLEASE READ: For educational and entertainment purposes only. I give no guarantees and take no responsibility for what you do with these parts. Use at your own risk. The Sprinter's 6-pin female plug (A0375453528 or A0375453328) on the…
This collection of parts was created to customize my Mod10 Server Rack originally designed by @MandicReally. This collection adds parts that fit with the Mod10 design aesthetic, but could also be used on other mini racks. One of my rack…
About Extend the simplicity of the AeroPress with a minimalist organizer to keep it out of the way, yet always ready to brew. Our kitchen is by Next125, and has a handy aluminum slot for hanging things, which the "backbone" of this…
These "chair clamps" sit at the corners of a rectangular wooden chair when clamping it with a sturdy nylon strap. My wooden kitchen chairs were starting to get wobbly at the joints after 20+ years of use, so I put some wood glue in the…
These are all currently available results.
