Counting matching models…
Update 23/05/26: added mirrored version to fix battery hole issue Update 11/12/24: added cutout for battery cover to make replacing the battery easier, model now has built in supports that should be removed before assembly Print Settings:…
Change Log: 2023/9/14: Changed hotend mount to better secure hotend, uploaded photos of the design and of prints printed with the design 2023/8/3: Added bowden fittings Printing: HMG7.2 Bambu Hotend Mount* HMG7.2 Bambu Base* HMG7.2 Bambu…
Required Hardware: Name Quantity M3 heat inserts 4 M3 Square nuts 2 M3x18mm screw (if you use 20mm screw, it will hit the heatsink) 1 M3x16mm screw (for mounting wire clip. you can use stock screw with spacer) 1 M3x12mm screw 2 File…
Installation: remove the bearing and the screws holding it move the z axis until it hits the top thread the knob until it stops turning Printing you can print the gcode, open the project file (3mf) in orcaslicer, or copy the settings into…
Hardware: Knob: name note quantity M3 Hex Nut Nylock preferred 1 Guide: M3x30 M3x25 might work as well 1 M3 hex nut non-nylock nut preferred 1 M4x5x4 Heat insert optional 1 X-idler: No additional hardware required Files: X-idler Specific…
I liked the original design but had 4 sheets so i remixed it to hold 4. Print Settings: Wall Thickness: 4mm/3 [email protected] Infill: 25% Bottom/Top layers: 4/[email protected]
WARNING: THIS MODEL HAS NOT BEEN TESTED
the clamp was too wide for my prusa mini's motor so i remixed it to be narrower
A template for making hotend skirts for the Hero Me Gen7 platform
This model aims to improve the rigidity, ease-of-adjustment, and height range of the z-axis adjustment screw/z endstop on the KP3S Pro. Bill Of Materials (BOM) Name Notes Quantity M3 Screw length depends on part, 39-44 uses 16mm, the rest…
Tools Needed: Crimping Tool Wire Strippers Wire Cutters 2mm&2.5mm Hex Keys Ferrule Crimping Tool (optional) Soldering Iron Lighter, Heat Gun, or other tool for melting heatshrink BOM: name quantity M3x8mm screw 7 M3 washer 2 JST XH 2-pin…
A template for making hotend mounts for the Hero Me Gen7 platform
This mod will increase the maximum temperature of a filadryer to around 70c allowing you to dry filaments like PETG and ABS more effectively I made this model over a year ago so there won't be great instructions Bill Of Materials Name…
The motor_side_spacer will hit the x-endstop mount, to fix this you need to print a new endstop mount, if you are using stock endstop print “Belt spacer endstop stock.stl”, if you use fysetc endstop print one of the stls in the fysetc…
A remix of https://www.thingiverse.com/thing:4731879 for Fysetc endstops
Copyright: this model contains parts from https://www.printables.com/model/185127-ar-cable-chain-link-opened and https://www.printables.com/model/411425-voxelab-aquila-switchwire-y-axis-bed-carriage-mgn1 licensing info is provided in the…
print settings: lots of perimeters, 4-7 high infill: 40%+ filament: PLA if unenclosed, otherwise ABS, cf filament if possible Copyright: cable chain parts are derivatives of https://www.printables.com/model/185127-ar-cable-chain-link-opened
Printing Use same settings as the rest of e3ng, parts should already be oriented correctly for printing Drilling & Tapping Screw the guides to the carriage ensuring they're aligned properly using the built-in lip Use a drill bit the same…
These are all currently available results.
