Counting matching models…
to wire a lab power supply or a set of AA's into something requiring a CR2032. https://www.printables.com/model/725567-fake-cr2032-battery is perhaps nicer, but requires other parts. So I quickly made this in OpenScad to just use bare…
Rubber part of TomTom holder ball joint failed. It is just a hollow sphere. With a bit of trial and error printed the right size from TPE/TPU. TomTom won't fall out anymore and can be positioned again. Print with the open side down in a…
With rounded edges and everything! If you need a slightly different size, look at npo's parameterized remix: http://www.thingiverse.com/thing:2162196 Print Settings Printer: Mendel90 Rafts: No Supports: No Resolution: 0.2 Infill: standard…
De kunststof schuifschakelaar kan de bestaande drukschakelaar op de print ingedrukt houden zodat het lampje aan blijft. New version with slide switch, so the light can stay on continuously. No need to modify the PCB, the existing…
To fit lead screw nuts to Mendel90 Z-axis. See photo's. Parametric .scad file, can be adjusted for other sizes. Print Settings Printer: Mendel90 Rafts: No Supports: No Resolution: 0.3 Infill: 20% Filament: PETG green (does not matter)…
Paramteric drawer insert for Raaco/vector cabinet. Holds SMD parts in mini containers / micro tubes / centrifuge tubes. Can be resized for other drawer sizes or container sizes, or to hold e.g. batteries etc. or to hold less or more…
T-slot scraper, parametric, sized for the Abene Mill @ MakerSpace Leiden Inspired by https://www.thingiverse.com/thing:38 and https://www.thingiverse.com/thing:1784353
draai-ding handvat voor zonnescherm. 2 helften die je aan elkaar kunt klikken en met zipties vast kunt zetten. Print in place (de gaten vormen de support voor de pennen). twist-thing handle for sunscreen. 2 halves that can be snapped…
This is 2 different designs: One for 2 ballpoint refils, the other for a ballpoint refill and a mechanical pencil lead. The file named V3 is a dual ended pen, it should fit Schneider Take 4 refills, 90 mm long 3 mm diameter. The pen body…
PCB holder for Open Logic Sniffer. Isolates the underside of the board while still giving access to the topside. Instructions Slice and print the STL, or edit the .SCAD with OpenScad.
It is UPSIDE DOWN for printing. Spill proof container: does not tip over or leak when tipped over. Can even be held upside down with (most of the) liquid remaining inside. Might be useful but comes without any warranties. Don't blame me…
Remix of the Samsung Galaxy S20 Cover. This cover is for the standard S20 (151,7 x 69,1 x 7,9 mm), not the plus size version. Print it with PETG because it is more flexible than PLA and makes it easier to mount the cover on the smartphone…
Seperator for the well known vektor or raaco parts cabinets. Raaco variant not tested yet, vektor fits fine in Vektor branded cabinets (like conrad ordernumber:813112 ) but is too big for raaco. If you uncomment / comment a line in the…
Holder to mount a silhouette cutting plotter blade (drag knife) on a Mendel90 3d printer, to use the 3d printer as a cutting plotter / vinyl plotter. Might fit other printers as well. Meant for SILH-BLADE-3-3T, fits on extruder mounts…
To test fit electronics in enclosure, but please note size might not be 100% correct so don't blame me if anything goes wrong. OpenScad model included, should be easily change-able for other similar enclosures. Not meant for printing,…
To fit LED's into moeler EF signal lamp or button fittings. LED (plus resistor soldered to LED) can be fit into this and then fit into the lamp holder as if it is a bayonet lamp. It is a bit finicky to print an it does not always make…
Part of the slider of a sliding door broke, so I designed and printed a replacement. But I don't know what the thing is called. Which would have been useful to find other printables… I included photo's that should be clearer then this…
Intended as a replacement bracket for a bike bell. Distance between screw holes is 34 mm, like https://www.printables.com/model/1414590-spare-bracket-for-kids-bike-bell but this can be changed (is parametric). Also handlebar size is…
Juggle ball enclosure for RGB juggle ball. 2 Halves in TPE, middle "connector" ring in PETG, and a filler bit in PLA to keep electronics in place. All as translucent as possible to let the LED light shine out.…
Behuizing van rgb jongleerkubus. Meer op https://www.circuitsonline.net/forum/view/message/2065202#2065202 en https://www.eluke.nl/2019/04/10/rgb-jongleerbal-jongleerkubus/ Maar ook bruikbaar als behuizing voor andere lichtgevende kubus-…
Sierstukje voor de nixieklokbehuizing Category: Electronics
See the original: https://www.thingiverse.com/thing:903332 Jansjö projects a smaller cone of light / narrower angle then a power LED without extra lens. Also I printed at a rather high speed. So the effect is far from perfect. I'm still…
Lamp base for bell jar. The openscad file has a bit of an explanation in Dutch. It is intended to be printed in spiral vase mode with fat walls and a 0.6 or 0.8 nozzle, with the lower few layers in regular mode, see added screenshot. The…
Enclosure for neon lamp candle step up joule thief. Project info in Dutch on: https://www.eluke.nl/2025/12/11/neon-kaarsje/ Can also be used as an enclosure for a flashlight, either modified for 2 AA or unmodified to house a LED…
Bumpers for the one piece "prima" juggling clubs from playjuggling.com. Printed in TPU/TPE 45D. Meant to reduce sound when the clubs hit the floor, tested and works. OpenScad design file included. Can be modified to tune the weight, so as…
Parametric multipart juggling club with wooden core, TPU bumpers and fully customisable shape. I designed this so I could print a juggling club that fits my backpack, but it can be used to make juggling clubs in all sizes and shapes. Use…
Behuizing voor 50228 display print. Voor/achterkant zijn lasergesneden, de rand/schaal is ge-3d print. Voor het lasersnijden zijn in de SVG verschillende kleuren gebruikt zodat de rand als laatste gesneden kan worden. Hetzelfde bestand…
These are all currently available results.
