P
PrintablesJim
Stepper Motor Cover - Ender 3 V3 SE
After upgrading my Fans, the Stepper Motor was screaming out for attention. This simple cover just slips-on and adds a finishing touch.
- Downloads
- 3,385
- Likes
- 371
- Rating
- 4.86
All models
Counting matching models…
P
PrintablesJim
Extruder Indicator Spinner - Ender 3 V3 SE
I still had some black showing on my printer so I made this Extruder Indicator for the Ender 3 V3 SE. I love watching it spin around when printing. https://www.facebook.com/KD9WNR/videos/734574294767306?idorvanity=347538964267031
- Downloads
- 2,143
- Likes
- 220
- Rating
- 4.81
P
PrintablesJim
5015 Fan Blower Mount - Ender 3 V3 SE
This replaces the stock 4010 Fan with a 5015 Blower. Pushes more air, but be advised, noise level will increase. You'll need (2) M3x20 Flatheads with Nuts to mount the Fan and (2) M3x20 Pan Heads to mount the Shroud. Fans I used:…
- Downloads
- 1,261
- Likes
- 200
- Rating
- 4.67
P
PrintablesJim
MOLLE HT Radio Hanger
This MOLLE Clip uses your HT's Belt Clip… Attach anywhere. There are two sizes: Small fits the Baofeng UV-5R, and HT's with Clips <22mm Big fits HT's with wider Clips up to 25mm Update 1/16/24: I noticed the small hanger had the clip…
- Downloads
- 1,192
- Likes
- 225
- Rating
- 4.4
P
PrintablesJim
Potensic Atom Drone - Prop Guards
After damaging a few propellers, I made these Propeller Guards. Can't say they make the Drone anymore crash survivable… But, they look cool. They are labeled for their position on the Drone: Right Front (RF), Left Rear (LR), etc… Will add…
- Downloads
- 984
- Likes
- 65
- Rating
- 5
P
PrintablesJim
Blink Mini Camera - Mount for Ender 3 V3 SE
Use an inexpensive Blink Mini Cam to monitor printing over WiFi. Clips easily to the Z-Rail on the Ender 3 V3 SE.
- Downloads
- 952
- Likes
- 127
- Rating
- 4.88
P
PrintablesJim
Tool Holder - Ender 3 V3 SE Gantry
Got tired of looking for my Cutters every spool change… Now I got a spot for them I can't miss.
- Downloads
- 818
- Likes
- 117
- Rating
- 5
P
PrintablesJim
4020 Diffuser Fan Mount - Ender 3 V3 SE
After upgrading my Layer Fans to 5015's, the stock 2010 Diffuser Fan looked comically tiny. This mount directs the airflow of a 4020 Fan to the Diffuser. Note: The Fan just slips-in… No screws. If tolerances make for a loose fit, a dab of…
- Downloads
- 747
- Likes
- 89
- Rating
- 5
P
PrintablesJim
Screen Cover with Ender Dragon Logo - Ender 3 V3 SE
This Screen Cover has the Ender Dragon Logo from Tom666 on Thingiverse. There's also a plain version without the logo. BTW: I used “Ironing” to get the lines out.
- Downloads
- 687
- Likes
- 72
- Rating
- 4.92
P
PrintablesJim
5015 Fan Blower Mount - Left - Ender 3 V3 SE
I wanted a two-fan setup so I added this Left Side Mount to match what I had on the right. It attaches with the original M3 screw. You'll need two M3x30 machine Screws with Nuts for the Fan. If you Make this one… Be advised that you'll be…
- Downloads
- 673
- Likes
- 121
- Rating
- 4.86
P
PrintablesJim
Gridfinity Plier-Stripper Holder
This 2x2X6U Tool Holder will hold four pairs of small pliers for electronics and/or jewelry making, and two pairs of Wire Strippers.
- Downloads
- 574
- Likes
- 86
- Rating
- 5
P
PrintablesJim
Hotend Cable Clamp - Ender 3 V3 SE
Remixed this excellent Cable Clip by adding the Creality Logo. You can never have enough Orange ;-)
- Downloads
- 428
- Likes
- 60
- Rating
- 5
P
PrintablesJim
Gridfinity 1x2x6U Plier-Tweezer Holder
This is a 1x2x6U Tool Holder for your Cutters, Long-Nose and a couple pair of Tweezers.
- Downloads
- 362
- Likes
- 40
- Rating
- 4.57
P
PrintablesJim
MOLLE Mic Hanger
Attaches a Ham or CB Radio Hand Mic, with a standard Button Mount, to your MOLLE Kit.
- Downloads
- 330
- Likes
- 78
- Rating
- 5
P
PrintablesJim
Paracord Winder Spool
I needed something to keep my paracord and throw bag organized and untangled out in-the-field. This is used by Ham Radio guys to toss a line up into a tree to pull up a wire antenna. Most of the cord winder models out there are for 100…
- Downloads
- 292
- Likes
- 48
- Rating
- 5
P
PrintablesJim
Honeycomb Fan Shroud for Ender 3 v3 SE
Love the original minimalist design… But I like the look of Honeycomb Vent Holes.
- Downloads
- 288
- Likes
- 31
- Rating
- 0
P
PrintablesJim
Tool Kit Holder - Ender 3 V3 SE
Working on my printer, I got tired of trying to pick up the small Allen Keys and Wrenches that come with the Ender 3 V3 SE in the OEM Tool Kit. Having these tools at-the-ready makes it easier.
- Downloads
- 275
- Likes
- 46
- Rating
- 5
P
PrintablesJim
Gridfinity 1x1x16U Tall Open Bin
1x1x16U Open Bin, works great as a Pencil Cup, or for longer tools/probes.
- Downloads
- 227
- Likes
- 23
- Rating
- 5
P
PrintablesJim
GoPro Mount Extension - Four Sizes
I needed something to use with my GoPro Clamp-On Mount to raise the camera up to bed-level. Once I got started, I made several different sizes: 100mm 75mm 50mm 25mm The 75mm and 50mm are in the pic., shown with my GoPro Mount - Short…
- Downloads
- 211
- Likes
- 29
- Rating
- 3.5
P
PrintablesJim
Tiny SA / Nano VNA Wedge Stand II
This is a larger version than the original; It sits your instrument at a higher angle and has a storage compartment with a press fit cover. The screwdriver in the picture is to emphasize… It is a Press-Fit ! Once you get the Cover on,…
- Downloads
- 201
- Likes
- 27
- Rating
- 0
P
PrintablesJim
Light Bar Wiring Conduit - Ender 3 V3
The new Light Bar for the Ender 3 V3 SE is OK, except they leave you hanging on how to run the wires to the Motherboard. The instructions don't mention that you need to drill a ¼ inch hole in the top of your right Z-rail. Which if you…
- Downloads
- 198
- Likes
- 59
- Rating
- 5
P
PrintablesJim
Print Bed Scraper with Light Bar Clip - Ender 3
Another simple Scraper, this one with the Ender Dragon logo embedded. The logo I found on Thingiverse by Tom666. If you have the Creality Lightbar for the Ender 3… you can use the clips to hang the Sraper right where it's handy. There's…
- Downloads
- 198
- Likes
- 18
- Rating
- 5
P
PrintablesJim
Yaesu FT-817 Rails
Just bought a used FT-817 on QRZ… Was a great deal. There's plenty of models for similar rails, but I needed to cover a big knob and wanted extra mounting points for a shock cord tiedown. There's a model without the tie-down points if you…
- Downloads
- 191
- Likes
- 13
- Rating
- 0
P
PrintablesJim
Case for the CatTouch Display for the Yaesu FT-991a
The CatTouch control-display for Yaesu radios from Catmeters.com is awesome. But I wanted a case that tucked up under the SP-10 Speaker a little better. This is what I came up with. This design is “screwless”. The Boards just snap into…
- Downloads
- 167
- Likes
- 18
- Rating
- 5
P
PrintablesJim
Gridfinity Lids - Multiple Sizes
Use these Lids to cover your open Gridfinity Bins… Keeps the crud out. 1x1 1x2 1x3 1x4 2x2 5x2* * Update 01/04/23: Added a 5x2 version for the Large Bin by DatBuschi https://www.printables.com/model/176917-gridfinity-big-storage-boxes
- Downloads
- 158
- Likes
- 35
- Rating
- 4
P
PrintablesJim
GoPro Mount - 90 Degree Adapter
This 90 Degree Adapter matches my GoPro Mount Extensions .
- Downloads
- 126
- Likes
- 13
- Rating
- 0
P
PrintablesJim
Top Tray with Magnets for GF Modular Drawer System
I love the Gridfinity Modular Drawer System by @chippwalters. But, I had 16U tall Tool Holders I wanted to have on the Top Tray. Without Magnets, the Tool Holders would fall-over if not careful. This remix adds 6x2 Magnets to the grid.…
- Downloads
- 124
- Likes
- 23
- Rating
- 0
P
PrintablesJim
(tr)uSDX Stand with ATU-10 Enclosure
This Wedge Stand for the (tr)uSDX , inspired by @w5aug, is a complete redesign to include Storage space for power and/or usb cables, connectors, Mini Mic, etc.. The Back Cover is a press-fit; It may be tight at first. The Stand can be…
- Downloads
- 111
- Likes
- 13
- Rating
- 5
P
PrintablesJim
Low Profile Spinner Knob for the (tr)uSDX
Remix of the low-profile knob by @DL2MAN_160897 … All I did was add a finger dimple for us folks that like to tune with one finger. You'll have to cut-down your Encoder Shaft… There's a video posted by Manuel in the original model showing…
- Downloads
- 102
- Likes
- 4
- Rating
- 0
P
PrintablesJim
Gridfinity Alcohol Bottle Holder
Now I keep all frequently used printer stuff handy… I go through a lot of Alcohol :-)
- Downloads
- 102
- Likes
- 21
- Rating
- 0
P
PrintablesJim
(tr)uSDX Battery Lead Cover
I didn't like my ugly splice job showing, or the fact that the two 22ga wires are are at a stress point. This Shroud or Cover slides in behind the Battery Holder and makes for an elegant solution to the battery leads. Can be glued to the…
- Downloads
- 100
- Likes
- 9
- Rating
- 0
P
PrintablesJim
Tiny SA / Nano VNA Wedge Stand
Props the Tiny SA and Nano VNA up at about 22 degrees… Makes it easier to work with on the benchtop.
- Downloads
- 86
- Likes
- 4
- Rating
- 0
P
PrintablesJim
RigExpert Hard Case
This is a hard shell case for the RigExpert AA Series of Antenna Analyzers. Keeps it protected in your Field Kit.
- Downloads
- 82
- Likes
- 5
- Rating
- 4
P
PrintablesJim
Spool Positioning Clips 30mm - Ender 3
These clips fit 30mm Spool Barrels like the Ender 3 and the Ball Bearing Spool Mount of my own design. Keeps the spool from traveling to the end of the spool holder.
- Downloads
- 80
- Likes
- 13
- Rating
- 5
P
PrintablesJim
Patch Cord - Programming Cable Rack
Need a way to keep all the Programming Cables for my Ham Radios better organized instead of bundled up in a drawer. There is a slight upward angle when mounted; Can use screws or sticky tape.
- Downloads
- 76
- Likes
- 15
- Rating
- 5
P
PrintablesJim
Gridfinity VNA Calibration Kit Caddy
Used to keep my calibration kit in a small zip-lock bag… Now I have this caddy on my bench when I'm using the Nano VNA… Once I'm done, it goes back on the grid on the storage shelf.
- Downloads
- 74
- Likes
- 14
- Rating
- 5
P
PrintablesJim
Blink MiniCam GoPro Mount Adapter
Sort of a Remix… But, of my own stuff. I took the plate off the Blink Mini Camera Mount , and added the mounting forks from the GoPro Mount Extension . The pic shows it mounted on an Ikea Lack printer stand with my GoPro Clamp-On Mount.
- Downloads
- 69
- Likes
- 12
- Rating
- 0
P
PrintablesJim
Tool Holder II+ v2 - Ender 3 v3
This thing holds my Cutters, a pair of Long Nose, a Caliper, and Tweezers. I like keeping often used tools close at hand: Tool Holder II++ There is also a version without the Tweezer Holders: Tool Holder II+ This is an improved Gantry…
- Downloads
- 68
- Likes
- 9
- Rating
- 5
P
PrintablesJim
Tool Holder - Spool Arm Mount - Ender 3
A variation of my Desk Stand Tool Holder, This one mounts on the standard Ender 3 Spool Mounting Arm. Keeps Tools handy and out of the way. There are two files: One with the Nozzle Wrench mounting clips, and the other without, your…
- Downloads
- 67
- Likes
- 13
- Rating
- 5
P
PrintablesJim
Lack Table Stacker
These “Stackers” are for the legs of the Ikea Lack Side Table, popular for use as Printer Stands and Enclosures. One table at 17 inches is too low, and two stacked tables was too high. So I cut the legs in half on one Table and put…
- Downloads
- 66
- Likes
- 13
- Rating
- 5
P
PrintablesJim
Gridfinity 1x1x8U Tool Holders
Three different Gridfinity 1x1x8U Tool Holders: Precision Screwdrivers Needle Files Hobby Knife and Scales Update 12/30/23: Added a version with two 16mm holes for some larger tools I had. Also, added a Block with no holes for easy…
- Downloads
- 61
- Likes
- 11
- Rating
- 0
P
PrintablesJim
Gridfinity UHF Connector Caddy
This 1x3x3U Gridfinity block has a place for PL-259 and S0-259 connectors, and keeps them handy when testing a Ham or CB Radio.
- Downloads
- 61
- Likes
- 10
- Rating
- 0
P
PrintablesJim
Shelf Mount Mic Holder
Needed something to hang my Hand Mics on my Radio Shelf and came up with this. I attached mine with Gorilla Tape… But, there's a countersunk hole for mounting with a woodscrew. There are two versions, mounting from the top and the bottom.
- Downloads
- 59
- Likes
- 11
- Rating
- 5
P
PrintablesJim
sBitx Battery Holder Mount
This bracket mounts an 11.1V LiPo RC Battery on the back of the sBitx Case. It attaches using the existing threaded-holes with 4mmx8 Pan Head Screws. Battery Life has many variables; For reference: The 5200 mAh (5Ah) battery I use gives…
- Downloads
- 57
- Likes
- 6
- Rating
- 5
P
PrintablesJim
Surecom Power Meter Stand
This simple wedge stand fits the Surcom SW-102 Power/SWR meters. Adds a little stability and a more convenient viewing angle; Easier to work with on the bench.
- Downloads
- 55
- Likes
- 7
- Rating
- 0
P
PrintablesJim
sBitx Top Cover Plate - Modified
I plan to run two external monitors with my sBitx. This simple remix just moved the holes around to open access to the second HDMI Port.
- Downloads
- 54
- Likes
- 2
- Rating
- 0
P
PrintablesJim
sBitx RTC Standoff
The Real Time Clock (RTC) board in the sBitx v3 is mounted by a header and just hangs there without support; It's also rubbing up against a Toriod :-( This Standoff adds support to keep the RTC from moving around. I'm running a Fan off…
- Downloads
- 53
- Likes
- 3
- Rating
- 0
P
PrintablesJim
FT-817 Spinner Knob
Fat finger Spinner Knob for the Yaesu FT-817. Probably would work for most applications requiring a 26mm Knob with a 6mm Shaft. Note: Ream out the Shaft Hole for a 6mm press fit, or Ream out to 6.5mm and self-tap the original Set Screw.
- Downloads
- 53
- Likes
- 4
- Rating
- 0
P
PrintablesJim
Gridfinity Laser Thermometer Holder
This is a 1x2x6U Holder for the ThermoPro TP30 Laser Thermometer. May fit others… YMMV
- Downloads
- 52
- Likes
- 7
- Rating
- 5
P
PrintablesJim
Another Spinner Knob for the (tr)uSDX
After printing a few of the knobs out there for the (tr)uSDX… Some I couldn't print, some came out wonky, and most… My finger didn't fit in the spinner hole :-( I made this one with an offset finger hole, more leverage, and I could make…
- Downloads
- 46
- Likes
- 2
- Rating
- 0
P
PrintablesJim
Gridfinity 1x1x16U Caliper Holder
This 1x1x16U Caliper Holder saves space; Has slots for keeping your Scales too.
- Downloads
- 46
- Likes
- 16
- Rating
- 0
P
PrintablesJim
sBitx V3 Rails
These Side Rails attach to the sBitx V3 and help protect the Knobs and Screen Area. They attach using the existing screws. Note: These are NOT CARRY HANDLES! If using the Foot Stands like the ones shown in the pics… You'll need the…
- Downloads
- 42
- Likes
- 2
- Rating
- 0
P
PrintablesJim
sBitx Tuning Knob - Spinner
I like tuning with one finger. This Spinner Knob for the sBitx will fit even my fat fingers. There's also a matching Menu Knob; The larger diameter seems less jumpy to me.
- Downloads
- 39
- Likes
- 2
- Rating
- 0
P
PrintablesJim
15Ah Battery Go-Box Panel
Panel fits the Apache 1800 rugged case from Harbor Freight. Uses a 15Ah Bioenno Battery (BLF-1215A) and has cutouts for Powerwerx Ports and Meters (1 1/8 inch diameter), and a 5.5mm Charging Plug. I used these:…
- Downloads
- 38
- Likes
- 6
- Rating
- 0
P
PrintablesJim
sBitx Foot Stand - Modified
These Footstands for the sBitx V3 have been modified for use with the sBitX Side Rails: https://www.printables.com/model/1025394-sbitx-v3-rails
- Downloads
- 37
- Likes
- 2
- Rating
- 0
P
PrintablesJim
Gridfinity 1x1x16U Hemostat Holder
This 1x1x16U block holds a pair of Large and small Hemostats.
- Downloads
- 36
- Likes
- 7
- Rating
- 5
P
PrintablesJim
Stand for the UV-5R with Mobilinkd TNC
My APRS Beacon setup with a Baofeng UV-5R and a Mobilinkd TNC kept falling over everytime I bumped it. This compact stand keeps it upright on my HT Shelf.
- Downloads
- 35
- Likes
- 7
- Rating
- 0
P
PrintablesJim
Pi Zero Case for ArduCam Auto Focus
Love the original model. But when I upgraded the Camera to a motorized focus model, the Camera would not fit; It's slightly larger that the standard fixed focus camera. This is used with any of the Case Backs available in the original…
- Downloads
- 32
- Likes
- 5
- Rating
- 0
P
PrintablesJim
Gridfinity Power Driver Holder
This 2x2x6U block is for the SKIL Rechargeable Cordless Screwdriver and the Bit Kit it comes with: https://www.amazon.com/dp/B07C4916LS?ref=ppx_yo2ov_dt_b_product_details&th=1
- Downloads
- 30
- Likes
- 3
- Rating
- 0
P
PrintablesJim
Harris XG-100P BNC Antenna Adapter
The Harris XG-100P has a recessed SMA Female antenna connector. Only Harris antennas specific to the XG-100P will fit elegantly. Using a widely available SMA Male to BNC Female connector, this spacer gives the support and stability needed…
- Downloads
- 23
- Likes
- 7
- Rating
- 0
P
PrintablesJim
Bioenno LiPo Battery Mockups
Simple boxes that match the size of popular Bioenno LiPo Batteries commonly used in a Ham Radio Go-Box. Handy for deciding which size works best for your application. These are printed in Vase Mode ! Set Vase Mode in your Slicer.…
- Downloads
- 19
- Likes
- 3
- Rating
- 0
P
PrintablesJim
Lack Table Leveler Cap
These are Endcaps for the legs of the Ikea Lack Side Table, popular for use as Printer Stands and Enclosures. One table at 17 inches is too low, and two stacked tables was too high. So I cut the legs in half, filled them with foam (the…
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
PrintablesJim
CFMC Keychain
Keychain for my brothers and sisters in the Chicago FM Club.
- Downloads
- 6
- Likes
- 1
- Rating
- 0
P
PrintablesJim
Wire Rack Clamp Spacer
I needed to mount a Clamp-On Desk Lamp to a Wire Rack Shelf. These spacers are grooved to fit a standard Metro Style Wire Rack
- Downloads
- 3
- Likes
- 4
- Rating
- 5
These are all currently available results.