Counting matching models…
I needed a way of knowing how various parts that I designed would fit together without a bunch of trial and error and wasted filament, so I designed this test. The markings on the test show the clearance in millimeters for each set of…
I made yet another temperature tower because I couldn't gauge how smaller details were affected with other temperature towers on Thingiverse. Printed in PLA, it only uses about 4 grams of filament. Each section is 10mm tall 4/4/21 Update:…
A print-in-place tool to make seed planting easy! PLA might work, but PETG is better for this. To use: Hold it horizontally and drop some seeds into the opening Stick the point into the ground. The marks on the side show ¼" increments -…
Mount your phone to an Arca-Swiss compatible tripod I combined the extended version of JakeJake's phone mount with the Arca Swiss plate by JohnClark The slider and knob are unmodified from the original design 1/9/2023 update: Several…
Attach your plants to a string trellis or a single hanging string. Once closed, the clip clamps down on the string and will not slide on the string. (I am using #18 mason line . I can't say for sure if it will work with thinner string.)…
Fits 12 reciprocating saw blades up to 9" long. Attach the lid with string so it won't get lost
This is a new version of my Mosquito-Proof Self Watering Planter design. I made the original pot because I wanted the benefits of a self-watering pot without having to worry that the standing water would let it become a mosquito hatchery.…
A sieve with interchangeable screens. Use it to filter whatever you want, but I made it for separating seeds from chaff. Print the sifter body and whatever screen plates you want. The side of the plate that sits on the bed should be…
The shelf support pegs in my bathroom vanity were always falling out, so I modelled and printed some that would fit a little tighter. They seem to be working so far. The peg has a diameter of 5mm The platform that holds the shelf was…
When Halloween costumes get handed down, sometimes the accessories go missing. 3D printer to the rescue! I printed in PETG. I think PLA would be ok too, but it might not be flexible enough This was designed to fit a small child, but seems…
A cover for the DJI Mavic Mini joysticks so they can stay on the controller while it's in the Fly More case. I saw 2 other designs, but they seemed like they could let the sticks slide/wiggle around in the case, I designed a cover that…
As I was trying to pull some weeds from my lawn without pulling up the grass, this idea came to me. This tool lets you pull leaves and stems of broadleaf weeds while leaving the grass alone. This does not pull the roots out (maybe it will…
Designed to hang this MOLAER Rechargeable Flashlight on peg board: https://amzn.to/3b0ElBE
Some ants like sugar and some like protein. This bait station can hold both kinds of bait at the same time so you can make sure to serve the needs of your tiny house guests. I use the following baits in this: Gel bait -…
A replacement earhook for a Plantronics Explorer 500. (The model number printed on the headset is MITE15) It might be ok with PLA, but PETG is better as this gets bent going on and off your ear 100% infill Print Settings Supports: No…
A turnbuckle for tensioning wire or string. I designed this for a string being used to hang children's artwork. Its probably not great for heavy things The two sides have threads going in opposite directions. Match the notches in the…
Use it to spread salt outside in the winter time. 1/12/17 Update: Customizable.stl is a version with no holes for those who want to make their own holes. Use a drill or your 3d modelling software of choice. Just make sure your holes fit…
This adapter attaches to a standard wet/dry vac hose and holds a Roomba e/i/j filter so the filter can be cleaned Print as oriented at 0.2mm layer height. I used PETG
I use stacks of cut up scrap paper held together with a rubber band as notepads. This notepad holder still uses a rubber band, but it makes the notepad easier to use. This is sized for paper that is approximately 4.25" x 3.67". That's one…
Clips for standard 830 point or 400 point breadboard. Use #8 or #6 screws to clamp your breadboard in place.
*10/28/19 Note: The PLA pot melted and deformed some when we had a bunch of days with temperatures over 90. I recommend using PETG if you think the pots will be in that kind of heat.* I wanted to try growing some herbs in a self watering…
Terro ant baits are very effective, but they are a pain to clean up when they spill. This is a tray that should keep them from spilling so easily and if they do still spill, the tray can keep the spill contained. This is for the newer…
A tool for interlocking locs. You can find how-to videos on YouTube
I use oral medicine syringes to measure chemicals for my fish tank. These adapters make it really easy. Just stick the syringe in the hole, invert the bottle, and pull out your required amount. These adapters fit API CO2 Booster and Tetra…
After using my old dice tower for over 2 years, I had some ideas for improvement. This new one features a print-in-place hinge design Low walls on the tray ensure that your dice are easily readable after a roll During play, use the…
The knob that comes with the MPC One+ is not well suited for scrolling through long lists. This replacement knob features a depression that will let you scroll continuously with one finger. The design is inspired by the original MPC One+…
This is a remix of Schweinert's Gobo Projector. I updated the lens holder to work with the types of extension tubes that seem to be more readily available on Amazon than the kind that he used. This works with Godox round head flashes ( V1…
Connecting a bag to the my Harbor Freight wood chipper has always been awkward. This attachment adds a chute that a bag can be tied onto easily. The top of the chute zip ties to the fastener piece. The bottom zip ties directly to the…
10/28/19: Files for version 2 added. This one is taller and more visible from above. The v2 build plate file has 10 markers arranged to fit on a Prusa I made these so I can split my lawn up into sections for applying various lawn…
A tail prop that can be attached to a suet feeder. It provides larger woodpeckers with a place to rest their tail feathers to improve their balance while they are on the feeder. No supports or additional hardware needed. Print with PETG…
Designed to hang this Tekton 10 piece needle file set on pegboard: https://amzn.to/3aTxn0W The handles are 3d printed. I doubt this will work with the stock handles
This can be used as an adapter plate for mounting the Godox MF-R76 ring flash onto the AstrHori 25mm F2.8 Macro Lens or it can be used as a retaining ring to keep a flash diffuser from falling off the end of the lens. Print with PETG. The…
Designed to hang this General Tools Digital Angle Finder on pegboard: https://amzn.to/2OnlMxV
A holster for Gardenite Ratchet Anvil Pruning Shears . I'm not comfortable sticking the shears in a pocket, but I need to keep them close when I'm doing yard work, so I made this. 10/29/19: I added a newer version that is much slimmer. I…
The changing table on the model #1780633 Pack N Play tilts because it is only supported on one side. My wife asked me to come up with a solution because she was tired of our baby rolling off. Here's my solution. Print 2 braces - one for…
Vented enclosure for 3cm x 7cm PCB prototype board. I'm using boards from (this kit. Just slide the board into the grooves, stick any wires into the slot, and screw the cover on with #6 screws. Wood screws were near my desk while I was…
Designed to hang this Uxcell 90mm magnifying glass on pegboard: https://amzn.to/2RZPoCe
A 2-tier desktop stand for an Akai MPC One+ and an Elektron Digitone (Also compatible with the Digitakt and Syntakt ). Each side panel is split into 3 pieces to make this printable on a Prusa Mk3 build plate. Print one of each side panel…
A cover for the LimoStudio F2530 flash strobe that comes in this kit: https://amzn.to/2v4QrJH I had trouble storing the flash safely because a delicate bulb sticks out from the end. This cover protects that bulb and allows the flash to be…
Adding a light to my 3d printer adds lens flare to my Logitech C615. This lens hood slides right on and solves the problem Print instructions Supports: Yes Resolution: .2
Dividers for storing breadboard jumper wires in plastic organizer boxes. (Mine are not the exact ones linked, but they are similar) I loved lewismoten's idea idea to organize wires in these cheap, easy to find organizer boxes, but I…
An under-desk mount for a Transcend P8 Flash Memory Card Reader (model TS-RDP8K). This mount blocks the Sony MS slot in the back. I figured that's ok because it's been many years since I've seen or heard of that format. Requires 2 #8 wood…
A hook for hanging solar motion lights on a Sojag Genova Gazebo gazebo Print it with PETG or ABS (PLA can soften and deform on a hot day) Print instructions A hook for hanging solar motion lights on a Sojag Genova Gazebo gazebo Print it…
With this clamp, you can secure a whetstone at a 20 degree angle and use it like a V-Rod sharpening system/Crock Sticks. Instead of worrying about the angle, you just have to hold the knife straight. See these videos for the technique:…
I wanted our garage door remote that stays in the house to look more like a fixture. This case turns the Genie G3T-R Garage Door Opener into a wall-mountable button. Use #6 or #8 screws to mount it or glue MagnetAddon.stl to the base and…
A replacement bow for LilPals Toy Violin
This is a simple add on for https://www.thingiverse.com/thing:2776269 The original instructions said to put foam on the sides of the light. I skipped the foam and made this tapered shim instead. Set up the light, but skip the optional…
Are you a bird lover who wants to capture stunning photos of your feathered friends at the feeder? This clamp will let you mount a branch to a standard 7/8" bird feeder pole to create a natural looking perch for bird photography. It uses…
A simple camera mount for a Wanhao Duplicator i3 that has the Z brace mod installed. HillbillyZT's mount wouldn't work with the Z brace mod, so I designed my own. This is compatible with any camera that has a standard 1/4" tripod mount,…
I wanted to keep the drawers of my Craftsman Versastack Mechanics Tool Set unlocked, but the spring loaded locking dial kept snapping back to the locked position on its own. This keep keeps it . . . errrr . . . locked in the unlocked…
I use my old Nexus 5 as an always-on touchscreen monitor for Octoprint. I made this clip to give the phone a home on top of my Monoprice Maker Select. Remixed from Cyul's spool holder clip and Ackeric's Nexus 5 Car Clip Print instructions…
These speaker stands attach to the rear accessory mounting rail of Studiologic SL MK2 keyboards ( SL73 , SL88 , or SL88GT ). You can insert a 12x3mm magnet into each stand to attach it to the controller magnetically or you can use the…
Pyjamasam's Decora Switch Extension is an extremely useful print, but the sharp edges on the handle make it a bit uncomfortable to grab. This remix of the handle has rounded edges that feel better. This is just the handle. You still need…
A funnel to make filling the Lasko 1128 Humidifier easier. The clip will keep the stopper open Print the clip vertically. If it's printed in a different orientation it may snap along the layer lines. The funnel requires supports
A cover to keep the umbrella hole in the Godox AD-R6 7" Bowens Mount Reflector from leaking light when an umbrella is not being used. Print it in TPU and then just snap it into place. I figured this would be easy to lose, so there are 3…
I wanted more features in my ColorMix test palette, so I made this one. It's compact. With the Core One INDX 0.10 Fine print profile it only uses 18.26 grams of filament and it prints in under 2 hours even with all the tool changes! (I…
These are all currently available results.
