Counting matching models…
Hello fellow Bambu Lab owners. Do you hate all that waste that the AMS units generates? Me too. That's why I made this guide how to reduce / tune / calibrate / optimize the purge waste. If you find this guide helpful, I'd be glad if you…
Remixed the base to fit with the original ams lid. It's 1.5 mm shorter than the original. Print settings They are the same as in the original model.
A rope winder for 3mm rope optimized for left handed and right handed person. Inspired by PraetorianCZ 's Rope Winder / Storage for Magnet Fishing model . Print Settings Material: PLA Layer height: 0.2 mm Perimeters: 3 Top layers: 4…
Wall mounted gamepad holder for one or two gamepads. The single holder is in version with one and two holes. Inspired by SmithRC's Xbox Controller Hanger (360 and One) . Print Settings Material: PLA Layer height: 0.2 mm Perimeters: 3 Top…
This is a custom made battery box organizer for 20xAA, 20xAAA, 2x9V and 4xCR2032. Print Settings Material: PLA Layer height: 0.2 mm Perimeters: 3 (you can use 2 but the sides flex a little when you push) Top layers: 4 layers Infill: 15%…
This is a small watering can (you can scale it up if you want) in shape of a diamond. Approx. size is 14 cm x 7.4 cm x 6 cm. Upon some reports that the can leaks for some, I've added a version with 1.5mm thick wall and 10mm spout orifice.…
I added missing hole for LED light to Kleinkünstler's Hormann HSE4BS replacement Cover . Print Settings Material: PLA Layer height: 0.2 mm Perimeters: 3 (or more so everything is a perimeter) Infill: all should be perimeters Supports: I…
A loop for Hormann Remote Control Protective Sleeve (HSE4BS, HSE2-868-BS) such as Hormann HSE protective case by Jakub Kalfař or HORMANN Coque pour télécommande by nico206 . Print Settings Material: PLA Layer height: 0.2 mm Perimeters: 3…
A front cap for Hormann Remote Control Protective Sleeve (HSE4BS, HSE2-868-BS). To be used with Hormann HSE protective case by Jakub Kalfař . I uploaded a STEP file so you can change the dimensions if your doesn't fit. It's important it…
This is a knife holder inspired by MKB 10 ADDA from Catler. It uses 28x neodymium magnets with 10 mm diameter. Use 1 mm height for 1 kg magnetic power per slot 2 mm height for 2 kg magnetic power per slot (for extra heavy knifes) weaker…
Simone Giertz invented a foldable coat-hanger and ran a kickstarter campaign . I designed a 3D printed version. It helps when your wardrobe is not deep enough for regular coat-hangers. Print Settings Material: PLA Layer height: 0.2 mm…
Wall hanger for an ironing board with curved legs. Use four 6mmx50mm half round head screws. Print Settings Material: PLA Layer height: 0.2 mm Perimeters: 4 Top layers: 4 layers Bottom layers: 4 layers Infill: 25% Supports: no (if you…
A spacer that goes between this loop and the body of the remote. It is to be used with Hormann HSE protective case by Jakub Kalfař or HORMANN Coque pour télécommande by nico206 . Glue it to the loop so it's easier to assemble. I uploaded…
Buttons for Hormann HSE4BS remote control. Use it with original body or with Hormann HSE4BS replacement cover by Hologos . I uploaded a STEP file so you can change it if you want. Print Settings Material: PLA Layer height: 0.2 mm…
Key hanger (holder, hooks) using words "My Keys". Print Settings Material: PLA Layer height: 0.2 mm Perimeters: 3 Top layers: 3 layers Bottom layers: 3 layers Infill: 25% Supports: yes (just for holes) Ironing: optional (for smoother top)…
This is a remix of card box + short dividers from Gloomhaven Sleeved Cards Storage Organizer by valhala which is a remix of Gloomhaven Full Storage by Wolph42 . The original card box by valvala didn't fit my small sleeved cards. They were…
This is an insert for board game Diamantový les (Diamond Forest) by Czech author (released by Dino). Included are compartments for Dwarf miniatures. I recommend using some kind of filler, like molytan so they don't break. Print…
Simple holder for hydrometer for metal frame printer such as Bambu Lab P1S, P1P, X1, X1C, etc. If you are missing a variant for your magnets, write me a message and I'll add the one you need. Print Settings Material: PETG / ASA / ABS (or…
Horní plastový háček pro zavěšení pro otevřenou kazetu - Fexi. Zmenšil jsem mezeru na rám okna z původních 13 mm na 11 mm. Print Settings Material: PLA Layer height: 0.2 mm Perimeters: 4 (everything is wall) Infill: - Supports: no
These are all currently available results.
