Counting matching models…
This is a full-size 390mm x 390mm / 15.5" x 15.5" Chess Board (or Draughts / Checkers) with separate customisable tiles, all of which can be assembled without glue. It was designed in OnShape CAD and printed with Orca Slicer. The board is…
Note: This only fits the E3V3 Plus printer. For the smaller E3V3 printer see my collection here . Update: I have a new Top Mounted Filament Sensor Bracket here which can also be used with side and desk mounted spool holders and dryers/dry…
A simple little puzzle - nothing special but I find myself fidgeting with it when I'm doing other things - hence the title. You'll need to print three of them and they can be made of anything - in the images above I have Silk, Tri-Silk,…
Features Larger capacity Higher walls Sloped base to reduce build up under ejector Shaped chute for easier disposal Printing This can be printed in PLA, but I used PETG as I was noticing some poop sticking to a PLA box due to being still…
I was DMd by another user to ask if I had come across or designed a replacement Ender-3 V3 Plus toolhead cover, as theirs had been broken. I hadn't, but was intrigued, so I took the cover off mine, and in the process cracked it (PSA -…
Note: This spool holder is designed to work with a re-sited Filament Sensor Bracket such as Ender-3 V3 Z-Axis Filament Sensor Bracket or Ender-3 V3 Top Filament Sensor Bracket . Note: This will not fit the Plus model as its frame is…
Note: This will not fit the Plus model as its frame is differently sized. See my Ender-3 V3 Plus Collection . The provided model for a Nebula Camera Mount for the Ender 3 V3 is all very well, but if your model has any real height to it,…
Note: This spool holder is designed to bypass the Filament Sensor - for a spool holder that supports a re-siting of the Filament Sensor see Ender-3 V3 Top Spool Holder (Rear Facing) . What is it with Creality and their unpopular spool…
I've always loved these kinds of spinners, but they can be a nightmare to print. Ball-based bearings are the best for spinning, but printing spheres is an ongoing challenge. So I thought I'd have a go to design something that is easier to…
Note: This will not fit the Plus model as its frame is differently sized. See my Ender-3 V3 Plus Collection . Revision and Additions: As reported to me the brackets were a little loose at the light end, so I've revised the models to make…
A convenient little TPU Charging Stand for the Pixel Watch 3 (45mm). Just insert the Charging Puck as shown in the images, place it on your desk and plug it in. The Stand is contoured such that you can basically drop the Watch on to it,…
A simple lockable box with Art Deco styling and customisable panels. To open/close the box just turn the central dial and the lid will release and can be lifted off. Design and Materials This was designed in OnShape CAD and printed with…
Release the ROAR with this Remix of the iconic Flexi Rex, this time with a Movable Jaw! Flexi Rex is an iconic 3D Print, loved by many, and is a go-to print as it is easy to print and a lot of fun. Here I've added a movable jaw for some…
The Helicone is a fascinating and mesmerising construct, which changes shape and aspect then you spin it. This is a very twiddlesome version - so much so that if you were to place it near a room door or in a hallway then every time you…
I wanted a more comfortable version of this so I designed it to be nice and rounded whilst still easy to print. Linking six of them gives the classic one-handed Fidget which you can continuously turn inside-out. However you could join…
New: E3V3 Plus STEP now available! I really like the E3V3's minimalist aesthetic, so I've designed mods to keep in with the overall look (see below). I'm quite pleased with the snap-on corner brackets designed for a light bar, so I've…
Update: The original didn't survive well on their first trip, so I have reworked the design to make them more durable. I have also fine-tuned the fit, and improved the aesthetics. These shades are contoured to snap on over the front of…
This top-mounted bracket for the Ender-3 V3 and V3 Plus is designed to clip onto the frame, and removes the big looping of raw filament issue when the E3V3 homes. It can be used with a Top mounted spool (see my collections on here), with…
I rather like the Art Deco style, so this is my attempt at an Art Deco vase. The Vase is printed in Spiral/Vase mode, and I'd use a line width just under twice the nozzle size - so for a 0.4mm nozzle use a 0.7mm line width. Also add at…
These cute critters are fun and bouncy. Print the set! Also included are a set of Filament Clips, just add to some filament, pop 'em inside, add tealights and make them dance! Or make a nice hanging mobile with them. Printing These are…
The original very nicely clips on to the end of the Z-axis rail. This version adds a small clip for the IKEA Jasjö USB lamp which is very cheap but quite effective, shortens the arm and strengthens it where it joins to the base clip (as I…
Introduction Plato was an Ancient Greek philosopher (circa. 400 BCE) whose name is associated with the five Platonic Solids - Tetrahedron, Cube, Octahedron, Dodecahedron and Isocahedron. They are more familiar today, though, as the gaming…
As there are many varieties of fitting for ceiling lamps, this is designed to sit on the bulb itself with a small High-Temp Heat Separator to protect the PLA. IMPORTANT: Only Use LED Light Bulbs As Shown - do Not use Incandescent bulbs -…
The Sentinel is an innovative computer game released first on the BBC Micro then subsequently on the Sinclair ZX Spectrum, Commodore 64, Amstrad CPC, Atari ST, Amiga and PC - see The_Sentinel_(video_game) . The low-poly entities in the…
This Silica Gel Box is designed to stay inside the Sunlu S2 Dryer to keep the humidity down when drying and/or storing filament. Note that it is not meant as a dryer for Silica Gel, there are many other designs for doing this. I remixed…
I've got a number of Creality printers and the supplied toolset is pretty much the same each time. There are a number of mountable tool holders out there but none quite matched what I was looking for, and I wanted someplace easy to keep…
This simple clip keeps the door of the K1/K1C slightly ajar when printing PLA, without compromising inner airflow from the side fan. Untested on the K1 Max and K2 Plus. Best printed in PETG, but PLA does seem to work, if less satisfyingly…
Storage box for XReal Air XR glasses, XReal Beam and XReal Beam Pro, with a snap lid and compartments for: XReal Air Glasses with Light Shield XReal Beam Accessory XReal Beam Pro Accessory USB Cable Spare Lenses Nose Pad Separator Whilst…
The Sinclair ZX Spectrum, released in 1982, was the first ‘home computer’ for many and was without doubt the kickstarter for the UK's now massive Game Development industry. Retro Games have caputured the essense of that legendary machine…
A convenient little Charging Stand for the Pixel Watch 2 or 3 (41mm). Just insert the Charging Puck as shown in the images, place it on your desk and plug it in. The Stand is contoured such that you can basically drop the Watch on to it,…
A remix to hold 6 235x235 build plates, such as for Creality K1, K1C, Ender-3, etc. Prints vertically - but how do you print on a bed plate something that is designed to hold such bed plates, ie. bigger? I'm lucky to have a larger printer…
Three Vases inspired by the Bauhaus Art Movement of the late 1920's, emphasising function, simplicity and geometric forms. Printing These can be scaled up or down as you need. Print them in Vase/Spiral mode (make sure to enable Smooth…
Create your own set of these elegant coasters, along with a holder that can take six. The coasters will also stack on their own without sliding. Printing These can be printed in one colour, but they look better if you use two - just…
This delightful Christmas Tree has a secret - it spins! Not like the killer Xmas Tree in Dr. Who, though (if you know, you know). Using principles from the Helicone Kinetic Sculpture (example here ) each layer of leaves can rotate over…
Note - if you have the XReal Beam Pro, see XReal Air + Beam + Beam Pro Storage Box Storage box for XReal Air XR glasses and XReal Beam accessory, with a snap lid and compartments for: XReal Air Glasses with Light Shield XReal Beam…
I designed this for upcoming Craft Fairs I'm hoping to sell at. It is in parts for easier transport. Printing The frame spars are at a 60% angle, which most printers can sort of handle, but I'd still recommend supports as it just makes…
As I keep keep my coffee beans in a metal cylinder container with a sealed lid, and pouring from it into the machine was less than ideal, I went looking for a coffee scoop that would be easy to use and fit in the container. I came across…
Don't you just hate those little burrs and blobs that you get on the top surface of your otherwise perfect prints? Or those edges that have come out just a little too sharp with excess filament? I do - so I found myself using some off-cut…
Scratching an Itch is important to all of us, so I have designed this modular extendable Scratcher with changeable ScratchIt attachments. When closed it is 225mm long, and when extended fully, 370mm. The Pyramids attachment is for larger…
The IKEA VINDSTYRKA Air Quality Sensor is useful but has an LCD display which makes it difficult to see if you are not looking at it straight on. I designed this little stand to tilt the sensor so that it could be read more easily when on…
I rather like Mildly_Admirable's Filament Swatch design (found here ), and as I have gone a bit mad with buying filaments, I designed this box to keep them. It has a lid with a simple clip hinge design. It can be printed in any material,…
I needed somewhere to store my recently-baked Silica Gel granules after doing a refresh of my filament crates. Now, I could have just used a plastic carry-out/delivery tub, but where's the fun in that? So I designed a box with a TPU seal,…
As there are many varieties of fitting for ceiling lamps, this is designed to sit on the bulb itself with a small High-Temp Heat Separator to protect the PLA. IMPORTANT: Only Use LED Light Bulbs As Shown - do Not use Incandescent bulbs -…
This Google-ey charging stand is for the Pixel Watch 2 and 3. Featuring: Suitable for Pixel Watch 2 and Pixel Watch 3, both 41mm and 45mm sizes Contoured so that the watches snap into place and start charging No need to remove band…
A fun and decorative distraction for your Printer Room/Workshop/Studio/Cupboard-under-the-stairs. Designed for my 300x300 Ender-3V3 Plus but can be scaled by X and Y for any bed size - just keep the Z the same. It's only 2mm thick, so the…
These are all currently available results.
