Counting matching models…
Walk-the-Plank Rodent Trap – (Almost) Fully 3D-Printable! Need a simple, reusable, and highly effective way to trap rodents without constant resetting? This classic walk-the-plank -style trap is designed for minimal fuss and maximum…
a simple storage box for a single 3.5" HDD
5-ring fidget toy - a smooth gliding, pocket-sized, stackable, twistable tactile toy to occupy restless hands.
ACMER S1 Laser Engraver Alignment Baseplate – Focus & Origin Jig This is a custom 3D-printable alignment baseplate designed specifically for the ACMER S1 laser engraver. It simplifies material placement, origin alignment, and focus setup…
Originally designed as a 3D printer accessory, this modular mount is perfect for OctoPrint or Klipper setups running on a Raspberry Pi—or any other compact controller tucked out of reach. It gives you convenient front-facing access to…
Designed for one of my neighbor's grandkids.
Holds up to 16 of the 2oz acrylic paint bottles used by common "cheap" brands such as Apple Barrel, Folk Art, & DecoArt.
Style A = Has mounting holes for screw-mounting Style B = No Holes for mounting with double-stick tape Uses 15mm (0.6") glass marbles that need to be inserted before the print finishes, ideally right as the opening is just beginning to…
Nice blank face for easy customization. (possibly with a Logo and/or a QR code) I'm using it for group meet-ups to share a link to a communication hub. It would be great for a restaurant to share the WiFi password. I'm sure there's other…
Holds 1x 18650 battery. Has mounting holes spaced 50mm apart. Mounting Holes suitable for M2.5-M3 screws.
Jars that can act as the lid another jar so you can create a "stack" of jars with one lid.
My wife asked for a spoon rest for her coffee spoon.
🔋 9V Battery Safety Cap – No Shorts, No Surprises! Keep your 9V batteries protected from accidental short circuits with this purpose-built battery cap. Designed for safety, simplicity, and fast printing, this cap is perfect for tossing…
Just a simple launcher for toy airplanes and gliders.
Wall-mountable holder for a box of 100 Vinyl/Latex/Nitrile Gloves.
Hanger Rod Mount – 1" Dowel Bracket with Mounting Holes This sturdy, no-frills bracket is designed to hold a standard 1-inch wooden dowel securely for use as a closet rod or hanging bar. It features a drop-in slot for quick installation…
Spool Roller designed for converting this container → https://www.amazon.com/dp/B0BHVT9PV1 into a filament drybox. -I'm sure it'll work for other containers and use-cases. Also see the Sensor Bracket designed for this setup here →…
Dual Battery Pocket-Safe Holder (AA / 14500 Compatible) Tired of worrying about your spare batteries shorting out in your pocket, backpack, or tool drawer? This compact, durable battery holder is designed to securely store two AA or two…
Tumblefluff's Top-Rail Tool-Holder. Holding all your Tools, and Shedding Some Light on your Workspace Updated 12/11/2023 (added a combination of chamfers and fillets to the feeler gauge slot) Storage Slots for: All the Tools that come…
You're going to need a 10 pin ribbon cable extension for the screen, and while not necessary, I recommend getting a TF card extension like the one in the image. You will also need some M4 screws and a few of these…
Store 2 3.5" HDD in a small case with a handle. Use a piece of unused filament for the Hinge-Pin.
🔑 Key Hook – A Hook Shaped Like a Key This is a wall hook that looks like a key — and it's for hanging keys. A playful twist on functional design, this model brings just enough whimsy to brighten up your entryway, office, or any space…
Just a simple large “jar” similar to a mason jar, only much bigger. It has a capacity of Approximately 80 oz or 2.4 L - specifically 82.38 fl oz or 2436 mL.
Laundry Money Holder – Holds $15 in Quarters with Quick-Count Windows Tired of scrambling for quarters on laundry day? This Laundry Money Holder is designed to keep your quarters neatly organized and ready to use. It securely holds up to…
This is a foldable roadside warning triangle designed for passenger vehicles. Printed in bright colors and enhanced with reflective tape, it offers a compact and reusable way to improve your roadside visibility during breakdowns or…
I upgraded to using a drybox with a bowden tube. This was my solution to using the bowden with my filament sensor, and I even added a small filament cleaner (because the ones I bought from Amazon were too big to fit). Uses a single M6…
I only used the Top and Bottom parts for a total of three shelves of storage due to the height constraints of where I was putting the shelf. If you have even less space, you can use the All-In-One that gives you 2 shelves worth of…
If you use one of the blank ones and plaster your logo on it for give-away items (like at a convention or something), can you please post a make and/or send me one?
Small printable box to store seed packets - fits most standard size packets.
Hardware Required Part Qty. Link to Example M5 Heatset Insert 4 https://www.amazon.com/dp/B0C4GV8XDX M5x25 Screw 4 https://www.amazon.com/dp/B07ZKGYBW7 608 Bearing 8 https://www.amazon.com/dp/B08XVFSZTF Assembly Instructions Base Assembly…
Sorry for not sharing a picture of it mounted. I'm out of correct sized screws at the moment. I'll update the picture in a few days if I remember.
Uses 2 dowel rods (1 inch diameter). I would have printed a sample to share, but I live in a rental, so I can't use it.
Plinko Tube Dice Tower This is a dice tower inspired by Plinko mechanics. It's designed to provide fair, random rolls while being easy to print on most 3D printers—no supports required. Dice dropped into the funnel bounce off internal…
This is a reinforced compression cable grommet designed specifically for hollow-core desk surfaces such as door slab desktops. Unlike decorative grommets that rely on thin veneer for support, this system clamps the top and bottom skins…
Custom Display Bracket for Anycubic Kobra Max (possibly others as well) that uses 2040 rails to provide Customizability.
I liked the Top-Rail tool caddies that people had made, but Nobody seems to have made one that holds just the "Essentials". Not one that held a Glue Stick. Nobody seemed to have put feeler gauge slots (sometimes called "Gap Gauges") on…
This is a 250 mm (≈10") low-profile Lazy Susan that uses standard 14 mm marbles as the bearing surface for smooth, quiet rotation — no specialty bearing rings required. The design captures 45 marbles between printed races to distribute…
Magnetic PCB Standoff Feet – Modular Soldering & Rework Aid These magnetic PCB standoff feet are a stable, modular alternative to traditional “helping hands” for soldering, rework, and electronics assembly. Instead of suspending a PCB…
I made this as a temporary mounting bracket for debugging and beta-testing an unusual pi-based project that involves using a SIM7600x module (providing 3G/4G data and GPS to my build). If anyone else has use for it, you're more than…
Just a simple bird and critter feeder that mounts to a ubiquitous u-channel sign-post, like the ones commonly used for mounting road and parking signs. great for something to watch in the parking lot other than your phone.
The 10 Cent Piston Pump is a compact 3D-printed syringe powered pump block that uses two nickels as simple, effective check valves. This design turns a syringe into a directional piston pump, with fluid moving cleanly in one direction…
My other half wanted something to hold a hair dryer in place to help dry an oil painting. If you have a use for it, by all means, make use of it.
A Top-Rail (2020 extrusion mounted) 75mm VESA mount for a lightweight monitor with Pi mounting bracket.
The paper towel holder is optional. I made it because I use paper towels with some spray bottles of water and IPA. The Shelf Platform is also optional. I made it because I couldn't put rolls over a certain part of the fixture (obvious…
Requires the following hardware: 2 x 6800ZZ Deep Groove Bearings (10x19xx5mm) 1 x 8" long 5/16 Carriage bolt 3 x 5/16 Nuts 1 x 5/16 Washer 4 x m3 10mm screws 4 x m3 20 series T-Nuts Printed Parts Required: 1 x Arm 1 x Barrel 2 x Inserts
OctoPrint Orange - is a semi-open-frame case for the Orange Pi Zero 2w plus the expansion board with a 30mm fan and a mounting point for the antenna, designed to be mounted on the side of a horizontal 4040 rail, providing access to the…
This is a flush-mount 2" desk grommet with an integrated 4-port keystone panel designed for clean, permanent desktop I/O access. It installs into a standard 2" hole and is ideal for desks made from solid-core doors or similarly thick…
This dual-purpose holder mounts to a 4040 aluminum extrusion frame and combines a soldering iron stand with an organizer for heat-set insert tips. The angled lower section features labeled holes (M2 to M8) designed to accommodate screw-on…
A simple and sturdy bird/critter feeder designed to mount onto any standard U-channel signpost (the kind commonly used for road signs). I installed one in my workplace parking lot so I could watch birds during my breaks. Attaches with…
3D Printed Mouse Wheel Kit (Encoder Shaft Adapter + Cutting Jig) 🖱 For Custom Mouse Builds, DIY MIDI Sliders, Volume Knobs & More! This project includes everything you need to build a versatile mouse wheel or encoder knob system using…
Overbuilt DIY Air Filter for Enclosures Whether you're filtering out laser engraver fumes, solder smoke, or mystery haze from whatever that last print was made of, this DIY air filter is built to take it. Designed for enclosed spaces like…
Requires one t-nut and screw. Designed for 55 point Mini Breadboards like this one - https://www.amazon.com/dp/B084RNTPXM You just need to remove the backing from one of the mini-breadboards and be sure to mount the printed part to the…
Mounts with 2 screws. Includes a drain hole so it doesn't collect rainwater. It is recommended that you add a small wad of cotton or similar material roughly the size of a q-tip head to prevent smaller birdseed from just pouring out… or…
Incense Cover for hanging with an alligator clip, keyring, paperclip, etc.
🖐 Seeed XIAO Dual-Button Handheld HID Case This is a handheld dual-button HID device enclosure designed around the Seeed Studio XIAO SAMD21. Compact enough for portability, yet deliberately sized for comfort during handheld use. Whether…
Refillable Solder Wire Pocket Pack – With Side Feed, Thumb Push & Coil Winding Tool Why throw away flimsy disposable solder wire packs when you can print a stronger, refillable one — and make your own coils from bulk spools? This upgraded…
Never lose your tea ball chain again! This simple 3D-printed counterweight attaches to the end of your infuser chain and hangs outside your cup, keeping the chain from slipping into your drink. Printed solid (100% infill) for enough…
🫙 Jar with Windowed Lid - Print & Assembly Notes Design Overview Capacity : ~0.5 L (20 fl.oz.) Window : Clear round plastic insert, 76 mm Ø × 1.8 mm thick Lid : Threaded, recessed for window insert Body : Threaded to match, filleted…
🌀 Modular Desiccant Pod System for Dry Boxes This modular desiccant pod system is designed to help maintain low humidity inside filament dry boxes or other sealed enclosures. Keep your filament dry and your workflow smooth with this…
It's just a replacement for the syringe plunger that came with the flux. If I need to describe it further, then odds are you don't have any use for it.
3D Printer Rail-Mounted Foot (with Felt Pad Recess) Need some sturdy feet for your printer or CNC frame, with a little vibration dampening and space to route wires underneath? This foot is designed to mount directly to 2020-compatible…
I designed an alternative furniture assembly pin to modify the design of a generic cube-storage furniture piece so that I could store larger objects in the "shelf" by removing one of the shelves or dividers (depending on orientation of…
4×4 Matrix Keypad Enclosure This 3D-printable 4×4 button matrix keypad enclosure is designed around 16 individual tactile push buttons and can be used with Arduino, Raspberry Pi, and other SBC or microcontroller projects. What’s Included…
Brewing loose-leaf tea at your desk can be relaxing, but it often leaves a mess—where do you put the wet tea ball, the spoon, or that dangling little chain? This compact tea-ball caddy keeps everything neat and organized. It features:…
Add a set of "Killroy Was Here" style googley eyes to a laptop webcam so you have a focal reference while recording.
Designed for mounting to 20-series t-slot surfaces such as https://www.printables.com/model/458565-t-slot-panel-set All models attach to t-slot or v-slot surfaces with your choice of T-Nuts or drop-in nuts. Check back periodically, as I…
300mm x 200mm oval bonsai pot with anchor/drainage holes and ball legs.
Somewhere to put your tea infuser and spoon after you're done making tea.
Laundry Money Holder – Holds $15 in Quarters with Quick-Count Windows Tired of scrambling for quarters on laundry day? This Laundry Money Holder is designed to keep your quarters neatly organized and ready to use. It securely holds up to…
These are all currently available results.
