Counting matching models…
Remix of Rugged Box V1 from @ Whity + @ Yanev recreated with FreeCAD 0.21.1 for practice. Spreadsheet included in file. Feedback is welcome. Three model options: RuggedBoxCopyV15.FCStd = base model, no tray RuggedBoxCopyV15Tray B .FCStd =…
Influenced from Window Bird Feeder by @wobke11 File list includes 1 parametric and 2 non-parametric models. PETG recommended. Intended to use with screw suction cups. Suction cup holes measure 6.5mm diameter for a 5mm screw. Cabinet…
Fits 80 topload card holders sized 4inch by 6inch FreeCAD file included
Printed in 0.3mm -- PLA -- 4 perimeters -- no supports -- 25% Gyroid infill Mounting holes are roughly sized for 3.5mm screw (3.4mm bore, 7.25mm dia. countersink) Rear gap to pass cables Pictured model is 100 mm deep x 405 mm wide (or…
Lighter weight option. Needs 2 screw-type suction cups and approx. 30 grams of filament. Model measures 150 x 50 x 20mm. Suction cup hole measures 6.5mm diameter for a 5mm screw. Printed mine in PLA, 0.3mm layer FreeCAD files included to…
Printed in 0.2mm with PLA Suggest 100% perimeter on axle. Press-fit assembly -- in my case did not need glue Full set = 7 pieces total (2X tire, 2X hub, 2X axle spacer, 1X axle) FreeCAD file included to modify as you wish
Model as shown uses 4X 3.5mm screws and 1/2 inch (12mm) thick plywood from 2x4ft stock cut to 125mm for depth Moderately parametric for board thickness, board depth, and screw sizing Chose to print mine in PLA, 0.3 layer, 3 perimeters,…
Snug fit, hasn't popped out on me yet (Houston roads…) Hardware required: 1 x mount 1 x clamp 4 x M2.5 nut 4 x M2.5 x 12 or 16mm bolt My print parameters: PLA 0.3mm layer height 4 perimeters 75% print speed (MK3)
Know your spool dimensions before printing. In my experience Inland PLA+ spools measure 53.5mm and PLA 54.5mm. Models are designed “over sized” 1.5mm compared to spool diameter for snug press fit. Model is parametric, adjust as needed.…
update 19 Jan 2025: Cannot 100% recommend this model at this time. Encountering layer splitting at threads after repeating screwing/unscrewing (somewhat expected). Longevity may be improved with modification of tolerances. Or use of nuts.…
Nearly identical to original, modified to accept 3/8" shafts Stopper: printed in 0.2mm layer, 15% infill with 100% infill on the bearing shaft Clamp: printed in 0.2mm layer, standard settings Clamp bolt: printed in 0.15mm layer, standard…
Version 0, started as a life-size sandbox prototype, finished as a toy Considering the kids are ogres the goal was to make pieces easily replaceable For reference pictured model is about 130mm long 10 printed pieces total -- parts list…
Made for 10mm KrytptoFlex cable. 15mm tall, 2mm thick. Any feedback is welcome. Printed with: PLA 0.2mm layer 80% infill (subjective) approx. 2 gram of filament
Model shown is approx. 85 mm tall. Uses 5mm standoffs and M2.5 x 12mm screws and M2.5 nuts. Remove the power cable hole fillet and model is parametric. Printed in PLA, 0.20mm, 15% infill, no supports (I printed face down). Approx 25 grams…
Press fit, no glue required. For reference the print shown was done with 0.3mm layer.
Hub replacement for Little Tikes shopping cart wheel. My print parameters: PLA 0.3mm layer 4 perimeters (personal choice) 20% infill ~ 65 grams filament
Printable in 0.2 or 0.3mm increments (assuming first layer height = layer height) Pictured model is approx. 115mm tall, 115mm wide, 70mm deep. 0.50mm total tolerance around drawer Magnets used to keep drawers from easily sliding out
50 x 50 x 25mm prototype 8mm dia x 1 mm cylinder for magnets 0.25mm tolerance Drawer handle and fillet require support material ** future iteration note: attempt no-support model, semi-parametric parameters, champfer vs fillet
Front are vertical, back are at angle. Semi-parametric model, FreeCAD file included to adjust height Included STL file is at +22.5mm No glue, presses into place Printed mine in silk PLA | 0.3mm layer | 50% gyroid infill | 3 perimeters
Parametric, see spreadsheet for variables. Drawer dimensions drive dresser dimensions. FreeCAD file included. As always feedback is welcome. Pictured model measures approx 75 mm x 70 x 90 (wide) 0.50 mm total tolerance. Be mindful of…
These are all currently available results.
