Counting matching models…
Disclaimer: Any of the mods performed are your own risk and will most likely void any warranty from the manufacturer. That said, hope this turns out well for you. Cheers. This mod adds air circulation / convection to improve the dryer's…
This is yet another Bambu Labs X1 filament splitter supporting external filament source and AMS without requiring the ptfe tube to be removed from the back of the X1. Had issues with other splitters so I designed this one to allow for…
Vent plugs for the top of the container to control air flow to manage dryer temp. Two parts and outer assembly to block all outer vent holes and the inner can be completely remove or lift and turn.
Cup or contents holder that shouldn't tip over easily on a soft surface like sand…. Printed in PLA without issue at 25% infill. Suggest .016 to .02 layer height to minimize the need for supports.
I printed 16 of these to plug all the unused filament and vent ports. The number of openings causes the internal temp to drop to the point where it really wasn't doing much to lower filament humidity.
Vertical laptop stand with two slots. One slot is 30mm and fits your average windows laptop with case, and the second slot is 20mm and works great for a Macbook Pro / Air. The opening below was design to house a CalDigit TS3+ Tried with a…
Just mirror the print for the other side
Provides three filament source paths. I often need to switch out between AMS and multiple external filament boxes and this eliminates the tedious task of swapping out ptfe tubes for the two external dryboxes. Assembly: Print the top and…
Summary Designed this 30mm fan shroud/adapter to concentrate the small fans cooling on the heat-pip e heatsink to help prevent heat creep on the high temp extruder. This fan mount replaces the two 9mm spacers on the 30mm cooling fan. Only…
The adapter plate allows for top mounting the ptfe connectors to the EIBOS Cyclopes to manage filament path. The design has three posts on the lower plate that have a snug fit diameter that can just press fit into the upper plate. Middle…
Summary Created a custom cable restraint for my xmax to protect the hotbed cable. There are others out there, but my bed had thicker dimensions so I chose to create my own. This design requires 2 tie wraps to secure the cable to the…
2 part model - ptfe port that mounts through the outside of the case and a nut that secures it in place from within. Recommended Filament: None – I've printed with PLA, PA, and PC and all worked fine. Nozzle Size: 0.4 Layer Slice: 0.16…
This support plate provides an alternative means of placing the Qi wireless transmitter pcb in emc1111 Wireless transmitter box. https://www.printables.com/model/466360-transmitter-box-update-for-wireless-powered-bambu- Plate will also…
These are all currently available results.
