Counting matching models…
I re-mixed this excellent piece to remove the Gridfinity framework on the bottom and added four divots to use silicone closet door bumpers as non-skid pads. Excellent design. You will need two M2 x 35mm boltslock two together on the end)…
This is a major upgrade to my original Stream Deck stacker. It holds two Stream Deck XL button boxes. I have redesigned the angle to be easier to read at 55° off vertical. I found the lower one hard to read with complex buttons on Flight…
I have invented a pair of adapters to be added to the sides of a NEXUS Rollator/Walker to permit the attachment of anything built with the “dovetail style” mounting. I have included a Cup Holder, a Shopping Bag Hook, a Carabiner Loop, and…
This is a quickly bashed-up stand to hold my four fountain pens. I printed it in black PET-G
After encountering difficulties finding a compatible alignment bracket for the Max, I decided to take matters into my own hands. Using OnShape, I meticulously crafted a customized model that would seamlessly fit the Max. My design…
I printed the side beams on their sides and would print them differently if I made them again. Supports, or at least a raft, are needed to make this work. Hardware Needed 8 x M2 X 12mm Cap Screws 8 x M2 x 8 x 3.5mm Heat Inserts 2 x 6" Zip…
This meticulously designed box provides a perfect home for a 100-marker art kit, allowing for horizontal storage that showcases the vibrant colored ends of each marker. The box is equipped with a sturdy lid that features a secure,…
This is the easiest motorized turntable for scanning you will ever build. You need to print the platter and base and install a few parts, which you can get on Amazon. You might want to print a dark platter and a light one to provide the…
This might be a niche item, but here goes anyway. I use a set of Samsung Odyssey G9 ultra-wide curved (1m radius) monitors for flight simulation. When I butt them together, two 1 cm bezels end up right in the middle, making a 2 cm black…
Reworked to be much stronger. Did you lose the cap that holds your WeatherTech™ car mats? I sent the Dipper-Mobile out for detailed cleaning, and they lost one of the two caps that secure the mat to the floor on the driver's side. So I…
I made this Key fob for a new Royal Enfield Bullet 350 motorcycle. It uses three colours separated by depth. in this case GOLD, BLACK, GOLD, and RED. Printed in PLA. Enjoy
I have the upgraded hinges on my K1 Max from here. https://www.printables.com/model/544884-creality-k1-max-270deg-door-hinges-w-door-latch I wanted to close a big gap on the hinge side for printing shrink-prone materials like ABS, ASA,…
I’m always frustrated about having to use a silicone tube of RTV or another product, and the only thing it comes with is the sacrificial tapered tube, with no proper way to cap it after use. The hardened silicone is easy to remove from…
This is an easy-to-print bracket so you can mount a SeaGate “Slim” hard drive to the bottom of your desk to regain some usable space on the top. I used 3M VHB (Very High Bonding) tape. It is pre-drilled for #4 Countersunk wood screws if…
This is an easy-to-print bracket so you can mount a MacBook Pro to the bottom of your desk to regain some usable space on the top. I used 3M VHB (Very High Bonding) tape. It is pre-drilled for #4 Countersunk wood screws if you feel that…
I completely redesigned the supports to make the tube hold the load and not the zip straps. This project is a two-piece tubular holder for a cane or umbrella. It is fastened to the side of a NEXUS 4-wheel walker/rollator. The tube has…
This model is a combination and modification of two others. The toad is at: https://www.myminifactory.com/object/3d-print-realistic-toad-103702 The missile pylon and missiles are at: Large Missile Pair with Pylon by sigmazero on…
I own a set of Thrustmaster TPR Rudder pedals, but I'm having trouble keeping them in place while I use them. I've tried various solutions, such as using sticky rubber feet and placing a 45-pound steel block on sticky rubber feet behind…
This bracket is designed to securely attach the ThrustMaster Flight Stick to a desk or table. It consists of two main components: the support bracket and the stick bracket. The support bracket is permanently affixed to the desk or table.…
I made this Key fob to go with a 1980 Honda 400 classic motorcycle. The Honda wing is an 80's style. It uses three colours separated by depth. in this case RED, GOLD, and BLACK. Printed in PLA. Enjoy
If you do much 3D printing, you soon find out that there is quite a bit of jetsam, detritus, debris, garbage, refuse, rubbish, scrap, trash, failed prints, and other worthless “printer poop” that needs to be disposed of. I created this…
I used the top portion of this spool holder to make a desktop holder that sits beside my K1 Max. Why did they put the spool holder on the back?? https://www.printables.com/model/668224-creality-k1-top-spool-holder-with-roller I built the…
This paint marker stand will hold 24 paint markers. Paint markers are best stored horizontally. You will need a 300mm printer to make it. Print it on the side. The four divots on the bottom are fo 0.9 cm silicone non-slip stickons.
This is an easy-to-print bracket so you can mount a MacBook Pro 87W power brick to the bottom of your desk to regain some usable space on the top. I used 3M VHB (Very High Bonding) tape. It is pre-drilled for #4 Countersunk wood screws if…
Four parts are needed to make this device carry my soda stream CO2 tanks and get them refilled. I have four, and it is always awkward to carry them in one hand (I use a cane.) The tanks are heavy when full, so I made this device…
One of the Venta AIr Wascher humidifier cover latches broke. I mocked it up using OnShape. It fits perfectly. I printed in black PET-G with the short flat end on the bed and used supports.
A double-sided two-colour cap for a Sodastream CO2 bottle. Red up empty, green up full. It matches the treads on the CO2 tank. Updated to include text
A improvement on the crappy plastic switch guard that came with my LASER Flashlight. Invented in OnShape. Printed in PET-G Flat, with supports. Perfect.
A Stevenson screen or instrument shelter is a shelter or enclosure that protects meteorological instruments against precipitation and direct heat radiation from outside sources while still allowing air to circulate freely around them. I…
I am currently developing a method to clean my CPAP (Continuous Positive Airway Pressure) equipment. I utilize a Phillips Fit Life mask that covers my entire face and resembles a firefighter's Self-Contained Breathing Apparatus (SCBA).…
An easy model designed to hold four fountain pens. I use blue, black, green, and red. I had stored them horizontally, but that makes them work poorly. Fountain pens are best stored vertcally with the nibs down. This rack accounts for the…
Transform the way you showcase your message with this innovative frame that attaches effortlessly to the glass of any door or window. It’s designed to boldly display an 8 ½” x 11” laminated sign, whether you want to announce that you’re…
Just a little bracket to fasten a round cross piece to a rectangular cross-section stretcher under an antique bench.
This is an easy-to-print bracket so you can mount an Arris2502 set-top TV box to the bottom of your desk to regain some usable space on the top. I used 3M VHB (Very High Bonding) tape. It is pre-drilled for #4 Countersunk wood screws if…
Do you have WIDEX hearing Aids? This is an easy-to-print bracket so you can mount a WIDEX TV Play transmitter to the bottom of your desk to regain some usable space on the top. I used 3M VHB (Very High Bonding) tape. It is pre-drilled for…
I needed a riser to place my ThrustMaster stick in the second drawer of my BD-4D (Big Desk—Four Drawer). This puts the stick art at the ideal height for my flight simulators. It looks like it is wider than it needs to be so that it will…
Mrs. Dipper lost the end cap from her favourite whisk. Naturally, I volunteered to help her out and quickly mashed one together on OnShape. Printed with PETG-CF
This small container will hold a 100ml Maple Syrup bottle and conceal a single “Maple Leaf” maple sugar candy under the red leaf top. It is threaded, and when closed, it holds the syrup securely. If you are a Canuck and want to send a…
This bracket will support a lightweight auxiliary monitor and is set at precisely 14° off verticle. I use it as an instrument panel monitor in my Flight Sim setup. Aircraft panels are traditionally vertical 0°, 7°, or 14° from vertical.…
An ideal gift to encourage imaginative play in young children. I made this set as a Christmas present for my grandsons. This is a set of traffic control signs like the ones you’d see on a construction site, hand-drawn with reference to…
I just whipped up a simple holder to tame my Exacto knife collection, keeping them from rolling around on the desk and preventing them from rolling off and stabbing me in the foot (again). See the warning note on the front face. 8-)
These are all currently available results.
