Counting matching models…
I CANNOT SAY THIS ANY SIMPLER. I'M WRITING THIS IN UPPER CASE SO THAT WHEN SOMEBODY SAYS ‘I DON’T UNDERSTAND WHAT I NEED TO PRINT' I CAN SAY IT'S ALL IN THE INFORMATION PAGE. AT A BARE MIMIMUM, EVEN IF YOU DON'T READ ANY OF THE MAIN TEXT,…
After the Printables takedown of one of my Benchy cored models due to the original Benchy licence restrictions, I deleted ALL my Benchy cored models. With the recent release of the Benchy into the public domain it has opened the door to…
Adapter plates for allowing K1C and later releases of the K1 to use my 270 degree hinges. ----------------------------------------------------------------------------------------------------------------- These two (small) side panel hinge…
I created the original A10chy a good few years back. Since then there have been other people who made their own variants since but this was the original printable A10 Warthog-Benchy (A10chy). For anyone interested in the history of this…
SPG Benchy. The split version is easier to print and allows for a choice of the main gun style. Choosing the split version makes even more sense when you consider that the gun is likely the hardest bit for an fdm printer to print in the…
If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…
Note:- The rear portion that attaches to the printer is included ‘ONLY’ in this download set. If you decide to use one of my other alternate cover designs you will need the back plate from t his Version .…
TLDR:- New Hinge design (V3) allows for quick change V3 face plates/covers while Using V2 additional V2 components for the hinge assembly. New optional tools added. Also includes post processing and detailed assembly instructions (with…
Please consider leaving a like. or just take it and slink quietly out the side door. NOTE:- If you intend to keep the rubber strip that is already affixed to the printer frame (where the glass rests normally), then fitting the shallow…
------------------------------------------------------------------------------------------------------------- This little print makes feeding filament quicker and easier. *TLDR - Instead of feeding filament directly into the PTFE tube…
The 270 degree hinges these new pins were designed for are here :- 270 Degree Geared Hinges for K1/K1 Max/K1C. Update November 1st 2024:- added some fatter link/connectors. Originals (by design) were thinner to allow the pins to be seen…
If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…
Quick description is:- The rear portion stays attached to the printer. The front portion is held in place by Eight 6x3 magnets. When you need access to the tool head, you simply pull the front portion off and that's that. Instant access.…
If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…
After the Printables takedown of one of my Benchy cored models due to the original Benchy licence restrictions, I deleted ALL my Benchy cored models. With the recent release of the Benchy into the public domain it has opened the door to…
After the Printables takedown of one of my Benchy cored models due to the original Benchy licence restrictions, I deleted ALL my Benchy cored models. With the recent release of the Benchy into the public domain it has opened the door to…
Printables admin began removing Benchy mods recently. After losing one of my best to a ban hammer I was forced to remove all my models from public access. Most I converted to use my own boat ‘Binky’ that uses a similar scale and aesthetic…
This version of A10chy (V3) had not been released until now. Version 3 has a lot of tweaks and changes to make printing easier and also improve a few things that make it the best A10chy version overall. It has enough differences from my…
Description PDF If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback…
Update November 1st 2024:- added some fatter link/connectors. Originals (by design) were thinner to allow the pins to be seen and also guarantee no sanding/post processing would be needed with an out of spec print. Newer fat links are…
Feb 17 2025 update :- An error with the button assembly was brought to my attention today. There was no hole where there should have been one on one of the button tops. I've done a quick fix and re uploaded with the new button replacing…
Please consider leaving a like. or just take it and slink quietly out the side door. For those not wanting to read all this text before deciding on what parts and upgrades there are, I have added an extra image to the pictures with a…
If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…
Please consider leaving a like. or just take it and slink quietly out the side door. A selection of screen cover options for the K1/K1C/K1 Max and any other printer that shares the same screen model. I'd previously used someone else's…
Quick description is:- The rear portion stays attached to the printer. The front portion is held in place by Eight 6x3 magnets. When you need access to the tool head, you simply pull the front portion off and that's that. Instant access.…
If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…
Quick description is:- The rear portion stays attached to the printer. The front portion is held in place by Eight 6x3 magnets. When you need access to the tool head, you simply pull the front portion off and that's that. Instant access.…
This is my rendition of the HAL 9000 from 2001 A space odyssey. It has the facility to turn the LED on and off WITHOUT having to lift the unit off the wall and without changing the look of the unit in any way whatsoever. The…
The original version was just a simple pen holder tube. This was the natural progression to that design allowing for one wheel to act as a small tray, adding a tyre for a larger height desk container, or another wheel to make it a small…
After the Printables takedown of one of my Benchy cored models due to the original Benchy licence restrictions, I deleted ALL my Benchy cored models. With the recent release of the Benchy into the public domain it has opened the door to…
If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…
Quick description is:- The rear portion stays attached to the printer. The front portion is held in place by Eight 6x3 magnets. When you need access to the tool head, you simply pull the front portion off and that's that. Instant access.…
I've been using Ripleys glass store for a while now but saw an opening for making it more useful. I regularly find myself at the back of the printer changing filament and not having snips to hand. It annoys me every time, so I set about a…
If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…
After the Printables takedown of one of my Benchy cored models due to the original Benchy licence restrictions, I deleted ALL my Benchy cored models. With the recent release of the Benchy into the public domain it has opened the door to…
This pair of side hinge covers is solely for use with the K1C type adapter plates found here :- K1C adapters to fit my V2 & V3 270 degree door front hinges . This pair of covers is the only set I created for the small adapters meaning you…
If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…
Please consider leaving a like. or just be that guy who takes it and slinks quietly out the side door. Upper panel of my K1/K1C/K1 Max screen protection cover. You will need one of the 2 frames (one snug fit, one looser fitting) available…
Please consider leaving a like. or just be that guy who just takes it and slinks quietly out the side door. -------------------------------------------------------------------------------------------------------------There are connector…
If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…
Meet BRRRT. The spiritual successor to A10chy. Printables admin recently removed my all terrain beach boat design for stepping over the copyright line of a certain well known test boat. Despite it being in no way able to be confused as…
If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…
If you print these plates, please consider sharing a make and showing them off as beyond my initial prints for proof of concept and fitting/size tests, I will not be printing all the designs myself, so I'm relying on others sharing real…
You will need one of the 2 frames (one snug fit, one looser fitting) available from the main set that is available here :- K1 Series Screen protection covers Screen cover Design was made in two parts to make printing easier, use less…
After Printables admin removed one of my models that had another boat at its core, I needed to either make a new boat or delete my fleet altogether. I opted to make a new boat. Binky was the result. It is not a derivative, nor does it…
Another Binky variant, The F16 Binky. To avoid potential copyright issues using a Benchy, I created Binky, a similar scale and aesthetic but without using any of their model. Binky is now the core of all my originally released Benchy…
New versions of Z axis lead screw manual control knobs for use with Ender 3 and any of my ender removable tops (Bender, Max, CIWS etc). I also added the key base here in case it is now missing from the other file sets (it's useless…
Please consider leaving a like. or just take it and slink quietly out the side door. ------------------------------------------------------------------------------------------------------------- Update. Two new versions added. Versions…
Please consider leaving a like. or just take it and slink quietly out the side door. ------------------------------------------------------------------------------------------------------------- I already have a set of 5 home boards for…
After the Printables takedown of one of my Benchy cored models due to the original Benchy licence restrictions, I deleted ALL my Benchy cored models. With the recent release of the Benchy into the public domain it has opened the door to…
Another pair of additions to the Binky fleet. I originally just made the first version, but then thought maybe another that was lower as though under power. So here we now have two powerboat Binkys I completely forgot to upload the new…
After the Printables takedown of one of my Benchy cored models due to the original Benchy licence restrictions, I deleted ALL my Benchy cored models. With the recent release of the Benchy into the public domain it has opened the door to…
A set of Binky boats in various guises inspired by the film Jaws. These are all based around my own boat and not the boat people often print to test their printers. There is no part of that file in mine. Until recently I had a version…
Update 10th September 2024 :- Added a lower hinge cover plate for the K1C. See note at the bottom of this text for more info to use that addition. A set of quick change cover plates for my 3rd version of the K1 series 270 degree hinges.…
These covers are under threat of being removed. Although I still use an s23 ultra the 24 and 25 have now graced peoples hands. If you print this, please share an image of a make. It may be the difference between this staying here or being…
Sparrows lock holder/grip for lockpick training. I created this for those who want an easier way to hold a sparrows lock without using a vice. UPDATED FILES NOTE:- One user found his locks were slightly too large for the original version.…
SPG Binky. It's a Binky on Tank tracks, with a gun. I had cheaped out when I did the BFG Binky as I knew it would be finished far quicker than the SPG. But I missed the SPG being available so cracked on with getting it done anyway. There…
If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…
A set of quick change cover plates for my 3rd version of the K1 series 270 degree hinges. These are designed solely for use on V3 and will not fit the earlier versions . The SG1 Badge/logo was created with multiple heights to the design…
Wheelie good Boat Car, Car Boat, Off Roader? Thing. Redesigned to remove the Benchy and replace it with a sylised boat that draws aesthetic cues from the original. Printables admin removed my previous Beach Boat as it used a Benchy as the…
If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…
Please consider leaving a like. or just take it and slink quietly out the side door. ------------------------------------------------------------------------------------------------------------- UPDATED - Added Pi Zero 2w mount as we can…
Update details are at the bottom of this text. Giving something up and need a reminder that doesn't scream out loud what it is you are giving up? I made these for somebody in just that position. Print them in bright colours or bland greys…
Binky in big gun tank style mode. Drawing heavily on my old SPG style but with a new twist to the design. I will still do the accompanying SPG at some point, but for now this is the only armour version in play. Any similarities to any…
A set of quick change cover plates for my 3rd version of the K1 series 270 degree hinges. These are designed solely for use on V3 and will not fit the earlier versions . The two smaller hinge face plates require a total of four 5x1mm…
A new variant. Not one previously done with the boat I no longer use at the core.
Six versions of Binky in distress. These replace the 3 older sinking boats that used the boat from another creator. After the admin on printables removed one of the fleet I pulled them all. After then creating Binky I have rebuilt most of…
my third space invader rendition. Designed in the same way as the others to be a real world print that throws a correct space invader character shadow when positioned correctly to a bright light source. I threw together a quick stand that…
Please leave a like or comment if you decide to download it, or even if you just like it. Its likes and comments that keep me doing stuff like this. Designed in the same way as the others to be a real world print that throws a correct…
Update:- There are now three versions here. Stock ender plastic extruder version. Metal creality extruder version. Plus the original version I use with the common red dual gear cheap chinesium extruder (stl named :- filament guide v4 2mm…
I bought a Galvanox ratchet and extension bar from Amazon recently. A handy little stubby ratchet that slip nicely into the elasticated sides of a leatherman pouch, albeit with a bit of a bulge. However, I've found that when I use it, I…
Designed in the same way as the others to be a real world print that throws a correct Space Invader character shadow when positioned correctly to a bright light source. I threw together a quick stand that also shows exactly what shadow…
To you? A ‘like’ may not feel as though it makes much of a difference. To a creator it's a thanks for making the thing and taking the time to share it. Regardless of who created an stl or set, wherever you download from, if it was worth…
I bought a Kobo remote for my Kobo Libra 2 colour. A great thing to own, but awkward to carry and easily forgotten when heading out on a trip. So I made this all in one carry solution. It is over engineered as a simple case, but I wanted…
Files included here are two different height units. one small and one tall depending on what you need. Whichever you choose, it goes under the kettles base to lift the whole kettle higher and increase the clearance between the…
These are all currently available results.
