Counting matching models…
A Scottish Claymore, modeled after the ones from Dark Souls and Elden Ring, scaled to be a Dummy 13 weapon. A large sword with a long, straight blade. This heavy sword is usually wielded with two hands, but for those with enough strength,…
This is a low-profile microphone arm that swivels underneath a monitor to save space. I've been using this for over 3 months, and it's been rock-solid. Fully 3D printed with no supports! All printed hardware can be swapped with M10 x 30mm…
The Bloodhound's Fang sword from Elden Ring, scaled to be a Dummy 13 weapon. Curved greatsword with a gently undulating blade wielded by Bloodhound Knights. A fearsome blade capable of brutal airborne attacks. Model is split into parts…
The Milady from Elden Ring, scaled to be a Dummy 13 weapon. A light greatsword; that is, a sword whose blade matches the length of a greatsword, while being constrained to a minimal weight. Nicknamed after ladies of noble status for its…
The Moonlight Greatsword from Dark Souls 1 as a Dummy 13 weapon. Printable without AMS. This sword, one of the rare dragon weapons, came from the tail of Seath the Scaleless, the pale white dragon who betrayed his own. “Seath is the…
This model takes the original K9 head and slots a hole to fit standard Dummy 13 accessories in the “mouth”. Prints without supports. Print flat on the “top” of the head (i.e. the side with the ears). The 3MF is laid out correctly.
Small magnetic bin for Bambu printer poop chutes. Uses four 6mm x 2mm round magnets press-fit.
Malenia's katana from Elden Ring, scaled to be a Dummy 13 weapon. Blade built into Malenia's prosthetic arm. Through consecration it is resistant to rot. Malenia's war prosthesis symbolized her victories. Some claim to have seen wings…
The Holy Moonlight Sword trick weapon from Bloodborne, scaled to be a Dummy 13 weapon. The outer blade slides over the inner blade, allowing the weapon to “transform”. Printable without AMS. An arcane sword discovered long ago by Ludwig.…
The Greatsword of Radahn aka the Starscourge Greatsword, scaled to be a Dummy 13 weapon. Curved greatswords of black steel wielded by General Radahn. A pair of weapons decorated with a lion mane motif. Radahn earned considerable renown as…
Remixed inner frame of the 1.0 model to use TPU ball joints. This results in a stiffer model that's less prone to sagging or loosening over time. The frame parts are printed with pegs that the TPU balls press onto. It is compatible with…
The Beastman's Cleaver from Elden Ring, scaled to be a Dummy 13 weapon. Curved greatsword of colossal size forged of dull iron and wielded by the beastmen of Farum Azula. The blade is incredibly heavy, but well-balanced. Comparatively…
Printed vertically on a BambuLab P1S without supports or brim at 0.08mm layers. Vertical gives the best surface finish, but printing it horizontally with Arachne perimeters can work too. If you have a bedslinger, consider adding a brim.
A simpler take on Gridfinity storage. This tote holds 5x4x12u of space with a bridged handle. They have stacking lips so they can snugly sit on top of each other for storage. I provided alternate designs (hex and solid) as stl files as…
The Hunter's Pistol from Bloodborne, scaled to be a Dummy 13 weapon. Pistol made at the workshop, for hunters stalking beasts. Hunter firearms are specially crafted to employ Quicksilver Bullets fused with the wielder's own blood,…
The Saw Cleaver Trick Weapon from Bloodborne, scaled to be a Dummy 13 accessory. One of the trick weapons of the workshop, commonly used in the hunting business. This saw, effective at drawing the blood of beasts, transforms into a long…
Rumi's Saingeom from KPop Demon Hunters, scaled to be a Dummy 13 weapon. Heels, nail, blade, mascara! Fit check for my napalm era! Prints flat. 0.1mm layer height. To assemble, remove supports and insert the handle into the Dummy 13's…
The default Kingdom Key keyblade from Kingdom Hearts, scaled to be a Dummy 13 weapon. There are a few options to print this out with various pros and cons. Print by Plate (AMS optional) This allows multi-colored prints without needing an…
The Ludwig's Holy Blade trick weapon from Bloodborne, scaled to be a Dummy 13 weapon. The outer blade slides over the inner blade, allowing the weapon to “transform”. A trick weapon typically used by Healing Church hunters. It is said…
This is a very straightforward and lightweight paperclip for Skadis pegboards. It's meant to hold paper and cardstock securely without being obtrusive or overengineered. Great for hanging art prints, postcards, and other notes!…
Based on @KYZ Design's High Airflow Spool Desiccant Holder , with a slot for a rectangular hygrometer. Inspired by @buranowu's remix for circular hygrometers . A hygrometer this close to the desiccant is going to provide a very localized…
The original 3mm walls of the TUSH (The Ultimate Spool Holder) were way too thick to fit inside of the generic cereal boxes I had while using a 68mm wide Bambu spool. The walls in this remix are 1.4mm, with added reinforcement along the…
I don't own one of these dryers to test the fit, I designed this when I thought I was going to buy one but ended up changing my mind. The dimensions are similar to TiToHa's on Thingiverse , so I'd imagine this would fit the same. Would…
A SAB chisel handle & holder based on the model by side5 , redesigned for FDM printability without supports. Great for ergonomic panel line scribing on Gunpla model kits! Features include: Collet-style grip Knurled tip End cap Optional…
This is an adapter to fit a Dyson standard hose to Chris Borge's execellent Kirby fume extractor model . This model uses most of the pieces from that original Kirby model, but swaps out the back grille piece with a Dyson hose adapter.…
A stackable tray for Topre conical springs so they don't get tangled. The trays slide and snap to each other, keeping it secure and compact in storage. Each tray is a 8x5 grid and can store 40 springs. Print settings Material : PETG…
An addon base to fit a boost converter to power the fans in a BentoBox. Has slots for a power switch and a barrel jack. Supports 4x2mm magnets, like on the original BentoBox. This was made to fit in a Bambu Labs P1S using the inner 5V…
A cover for A5 refillable notebook binders (like from Muji or Kokuyo Campus ) that allows the book to lay flat while opened 360° around. For best results, calibrate your ironing settings to get a smooth top surface. I love the concept of…
“Topre sleeve” adapter for MX stabilizers to use for Topre spacebars. To install: Print this out, no supports necessary. Arachne walls recommended. Cut the old stabilizer stem to about 1.5mm. This is used strictly for alignment. Superglue…
This is a remix of @magu's excellent Analogue Pocket Face Mask to include: USB port cutout Side button indents, so the case doesn't accidentally press power or volume Slimmed cutouts for face buttons to provide more structure Analogue…
This filament clip combines several features from other clips into a system of extensible/remixable clips: BambuLabs AMS compatible fit when inserted on right side only ( inspired by STORM DESIGN ) Notched bend to securely hold filament…
🗡 This is pre-sliced 3MF and STL files for you to print and assemble your own sword. 📏 54" long × 13" wide. 🔩 Holes for a ½" × 48" dowel rod are pre-modeled to provide rigidity. Holes for ¼" dowel pins are pre-modeled for aligning the…
These are all currently available results.
