Counting matching models…
I did not do this design. I found it on Thingiverse, and it was originally for hanging a longboard on the wall, which I printed some of them for, but I was looking for a latch hook to hold up the side discharge on my mower to keep it out…
7-day insert for 80mm x 32mm pill bottle, as used by HyVee and other pharmacy chains. I use these for daily doses, but also made an AM/PM variant for those who take pills twice a day. This version has slots in the bottom nthat act as a…
I have a utility trailer I got for my EGO lawn mower and wanted it to match my mower. So I made these printable letters that I was able to epoxy on to the side of my trailer, though they could be used, or re-mixed into other forms. I hope…
I modified the original model by @Eliascolon_1303281 to be mounted with wood screws, so there are now 2 tapered end screw holes instead of the single hex peg on the back. There is another version for peg boards, but this was listed as the…
Remixed the square valve knob to work with the slotted style, and the inverse slot style, accommodating both of my own floor jacks.
Holds 2 bits to right side of drill attached with a standard M4 kex key bolt.
7-day insert for 88mm x 48mm pill bottle, as used by HyVee and other pharmacy chains. I use these for daily doses, but also made an AM/PM variant for those who take pills twice a day. This version has slots in the bottom nthat act as a…
This is a mount for a standard Tap Handle to hang off of a wood 1x3 rail (¾" x2-½"), which is wall mounted with standoffs, or a 1x2 laminated on the back. It is designed to mount with a 3/8"-16 bolt (standard for most tap handles, but I…
I took the model that I was using to mount HDMI splitters and altered the width, height and depth to accommodateaccommodate this HDMI 3-way Switcher I use for my kids gaming systems to run and Xbox, Wii-U and Switch on a single Game input…
I made these to keep cables together from my guitar fx to my amp. I have power plus a digital signal cable and then a USB. I designed these clips, printed in TPU, to keep them together. The cables stay in the clips nicely. There are 2…
I remixed this model to fit a smaller space, as the original 4-slot version is too wide for where I need the rack, so I made 2-slot and 3-slot versions of the reinforced remix of the original model. There is also a 5-slot version, which…
I was tired of my mower deck banging and rattling around while driving across the yard at higher speeds. Much of the rattle comes from the bare metal rod that the front of the deck hooks to, and there is more rattle in the back hanging…
Carrier/Storage for EGO Z6 mower for under $40. If you have the bagger for your Z6, use these mounts to attach a $30 Storage Footlocker to the H rack when the bagger is removed. I used #10 ¾" bolts with lock nuts (about $5 total, from…
Under desk mount for a "teetek USB 3.0 DP KVM Switch 2 in 2 out", which is a Dual Display Display Port KVM from treetek.
I made this after a cut on my head from the sharp corner of my shelf at head level. Print in any material without supports, including TPU. Quick and easy print to protect those corners, or anything that bumps into them.
I have a dump cart (lawn trailer) I use with my mower, which I keep in the garage. I have a finished floor in my garage, and did not want the metal tongue scratching into the finish. This is merely a resting pad, or skid plate, for the…
I kept bumping my KVM which was sitting on top of my tower, under my home office desk. There are 13 cables plugged in, and I was always knocking something loose, and losing a monitor, or a USB device, camera or even they keyboard and…
This is a remix of the original model from @da_CHRIS_1559574 for mounting a Line 6 Relay G10S receiver by 4 screw instead of hanging from an amp handle, if mounting on a pedalboard.
I use these to keep cables tidy off the back of my amp by clipping them to my amp stand. Made for the Gator stand, but should also work on the Boss version or other stands using either 30mm round or 30mm x 15mm rectangular frame tubing.…
I modeled these mounts for my Nektar Expression Pedals so they can be mounted to a pedalboard to the right of my Line6 Helix as exp 2 and exp 3. (mine are modified with shorter, more durable cables) I have variants of the front mount:…
After I scraped up the bagger on my mower driving by the panels, I looked for a model to print corner protectors for the aluminum solar panel frames, but the ones I found did not fit the Rich Solar panel frames. Then, I decided to make a…
I have a Gator amp stand that holds up my Line 6 Powercab 212 Plus, and I don't like cables hanging down or looking at a mess of wire (at least, no more than I have to. And I worry about a cable being tripped on and my amp tipping over. I…
Volume/Tone Pot Spacers: I was recently changing out the tone pots on one of my Strats and the pot/switch and stacked pots had long shafts, so I made some spacers to get the height correct above the pick guard so that the knobs did not…
I purchased a used Mission Engineering expression pedal for my Helix, but it came with ony 2 of the rubber bumper/feet missing. Instead of buying replacements, I decided to create and print better bumpers from TPU rubber, as 2 bars…
I designed this object to be printed in TPU to pad the stop plate for the rolltop door on.my shed, as when it opens it bangs from metal on metal. I have these pads on both sides to deaden the stop. They works perfectly. I no not know if…
I designed this to hold my helix in place and keep some of the cables more neat. I like the helix at a little bit of an angle to more easily reach the 2nd tow of buttons. I have seen others elsewhere, but wanted something different than…
I have run into several things on errror with my EGO Z6 Mower (e-steer), and the front weights make it even more of a danger. I designed these to be printed in TPU and cover the outside and corners of the weights with TPU rubber. Simply…
Just for the Strandberg fans out there. We all know that the wood stands are difficult to acquire, hey don't make the cool shirts they used to, and who cares about a coffee cup, right? But if you want to dress up your pedal board, or put…
I made this bushing for my garage door for where the opener arm.attaches to the door and rattles. The bracket on the door is often wide (20mm or so) while the arm is only 7mm or so think. This reduces tattle and banging and keeps the arm…
I designed this part to hold my amp stand securely to a dolly made from 1x3 pine and a $5 set of casters from Menards. This piece fits over a 1x3 end, and screws are used to hold the caster and the printed part to the 1x3. Many pipe style…
If you use your Z6 for commercial, or just want to put a flashing yellow light on your mower, then this mount is designed to attach to the top lid of the bagger via 2 small mounting holes. There is a 4" x ⅚" metal mending brace from…
I created this TPU grip for the lock lever for the Ideal Door roll top garage door on my shed. This is a very specific model for this bare metal lever. Note: There is a cross member inside that grabs onto the round hole on the metal…
My Ideal Door rolltop door has a slide lock pin, but it had a lot of play in it, where the door could move up and down over an inch. I designed this piece to hold the door in an exact position when locked. From the inside, close the door…
I found the original wall.mount to be bulky and inconvenient, so I made this more compact mount that is easier to manage and fits in a smaller space. I printed mine in white PETG to take the outdoor heat (covered deck fan). I secured it…
I love my Z6 e-steer, but was frustrated with all of the rattles. I have made models to print in TPU to greatly reduce the bangs and rattles. This one is for the bagging unit. These pads will make it so the mounting pins cannot be…
I made this because my 18' x 8' steel door, the Genie Accelerator opener with its worm gear, tends to flex the rail in all directions while opening and closing. Even with ideal spring tension on the door, this also makes the door jerk…
I made these to hang dowels from the ceiling in my shed to store hanging baskets over the winter. However, these could be useful in closets, storage rooms, or a laundry room to hang things be hangers for drying, or storing clothes, or…
These are all currently available results.
