Counting matching models…
This 4 Roll Tape Holder is a convenient storage solution designed to hold four rolls of packaging tape, keeping your workspace tidy and tape easily accessible. I personally use it for various types of tape, but it’s sized perfectly to…
This 2 Roll Tape Holder is a compact storage solution, designed to hold two rolls of packaging tape to keep your workspace tidy and your tape easily accessible. I personally use it for my fragile package label tape, but it’s sized…
This version of the Shop-Vac-Hose and Cable Hanger / Hook utilizes the Hillman's Wall Dog 1-1/2 in. Hi-Lo Steel Pan-Head Philips Anchors which are found on Amazon and at hardware stores like Home Depot in the United States. It is nice…
This thickness gauge is designed to to aid in planer activities when trying to obtain the desired thickness of your wood
This print will help you to keep your small Kreg Clamps organized. To mount it uses 2 Hillman's Wall Dog 1-½ inch Hi-Lo Steel Pan-Head Philips Anchors which are found on Amazon and at hardware stores like Home Depot in the United States.
This adaptation to the headphone holder model is to accommodate the Hillman's Wall Dog 1-1/2 in. Hi-Lo Steel Pan-Head Philips Anchors which are found on Amazon and at hardware stores like Home Depot in the United States. ***Update***…
I designed this 4in dust pipe fitting to work in conjunction with a 6in dust pipe fitting ( link ) for mounting my pipes to the ceiling of my basement shop. Since my shop has low ceilings I needed to keep the pipe very close to the…
This holder was built with a ¼" screw shank hole to accommodate the the Hillman's Wall Dog 1-1/2 in. Hi-Lo Steel Pan-Head Philips Anchors which are found on Amazon and at hardware stores like Home Depot in the United States.
I designed this 6in dust pipe fitting to work in conjunction with a 4in dust pipe fitting ( link ) for mounting my pipes to the ceiling of my basement shop. Since my shop has low ceilings I needed to keep the pipe very close to the…
If need screws and nuts here are links: Square Nuts → https://a.co/d/1lLCgwc Screw set assorted → https://a.co/d/1St4kwG
This jig is designed to give a perfect fit for the Everbilt 3-1/2in w 1/4in Radius Hinge. The jig works with the Porter Cable Router Template Guide 42054 (¼in I.D. and 5/16in O.D.) and Whiteside RU1800 Standard Spiral Upcut Bit 3/16in…
This model was built to redirect airflow when the overhead dust arm is not in use. I do a lot of operations where just the riving knife is inserted and wanted to ensure I had the most under table suction as possible.
This model is for a ¾" bench dog with a head that has a diameter of 1-¾", but is flat on one side. The head has a ¼" rise from the bench. The bar measures 7-¼" L x 1-¾" W x ½" H. If you would like to see how this design was built in…
This cord wrap requires 4 #8 x 1-¼ inch screws to secure it to a surface. I built mine to hold a custom extension cord for my mobile scroll saw stand. Supports are optional but painted on because they ensured perfect circles and were easy…
This thickness gauge is designed to to aid in planer activities when trying to obtain the desired thickness of your wood
I had been struggling with a way to better secure my slat style shoe racks to my bench while sanding. Tired of holding it by hand or fiddling with scrap wood I decided to up my game and 3D print a solution for myself. I printed mine with…
I made this jig so I could make a corner with a 6in radius on a cabinet I am building. I will use a jig saw or band saw to remove a majority of the material then a spiral pattern bit to reference the jig to make it perfect.
This holder was built with a ¼" screw shank hole to accommodate the the Hillman's Wall Dog 1-1/2 in. Hi-Lo Steel Pan-Head Philips Anchors which are found on Amazon and at hardware stores like Home Depot in the United States.
I tend to use my Incra 5000 miter sled to do the final length cut on boards to ensure I get the exact same length for every part. One of the annoying parts of doing this for me was that I always needed to steady the bolt with my finger.…
I wanted a simple camera that didn't require a storage plan for use in my Original Prusa Enclosure so I went with the Wyze Cam OG. In order to locate the camera in the best spot for me with flexibility I decided to magnetically mount it…
This model was designed to hold common screws I buy by the box like the #8 x 5/8 Sheet Metal screws in the picture. The box is made so that an index card could be cut for a label, a label plate could be printed, or the label from the box…
This band clamp rack can be used for more than just holding your clamps, but the specific use I built it for was mounting my Merle clamps from MLCS. To mount it uses 4 Hillman's Wall Dog 1-½ inch Hi-Lo Steel Pan-Head Philips Anchors which…
This model uses two #6 screws in my case ¾ inch long to securely fasten an electric cable measuring 5/16th in diameter to the mobile base of my scroll saw. I printed mine with PETG and needed no supports. I included gcode to print 1 or 10…
This model was designed to hold common screws I buy by the box. The box is made so that an index card could be cut for a label, a label plate could be printed, or the label from the box could be cut off and inserted. The lid is friction…
When I mounted my dust collection pipe to the ceiling in my basement shop it meant that one of my Jet AFS-1000Bs had to be moved from the ceiling to a wall. Worst was that it had to be put close to another wall where the exhaust actually…
Based on the design of my Heavy Duty Band Clamp Holder I realized once mounted that the outer lip was large enough it required me to loosen the clamp to remove from the wall. This variations reduces the diameter to not require that. I…
Based on the design of my Heavy Duty Band Clamp Holder I realized once mounted that the outer lip was large enough it required me to loosen the clamp to remove from the wall. This variations reduces the diameter to not require that. To…
If you love Jessie filament as much as I do, you’ve probably noticed a small challenge with its spools: the slight indent in the plastic causes them to shift left on spool holders in enclosed setups. For Prusa printers, this drift can…
Product Description This download contains the latest updates for our aftermarket upgrade for the DeWALT DW735 planer , designed to modify the machine’s factory dust extraction method to an over-the-top dust collection system . Now…
These are all currently available results.
