104 models
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these at your own risk. Update - 2/20/2026: If you care about the future of 3D printing……
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these models at your own risk. There is an updated version 2.1 of this Dummy 13 Weapons Pack,…
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these at your own risk. If you find these for sale on Amazon , Etsy or anywhere else, they are…
Update - October 26, 2026 This design will be removed in the next week or so due to concerns with the revised EU Product Liability Directive, Directive (EU) 2024/2853, which goes into force in early December 2026. My understanding is that…
There is an updated bin design which has latching lids available at the links below (under “Other Stuff”). The version here does not latch closed (it was never intended to have that function, and only has a tab). Update - 2/20/2026: If…
These are USB cable organizers designed to be wall mounted, either using #8 screws, 3M Command Strips or double sided tape. The 6 place cable holder has 4 places for thicker cables (5mm openings) and 2 for smaller ones (4mm openings). The…
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these at your own risk. These are tools for my “ Dummy 13 goes to the moon ” (remix) of the…
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these at your own risk. I needed some BBQ tools and a “Grill Pack” for Dummy 13, and though…
Update - 2/20/2026: If you care about the future of 3D printing… Please inform yourself about the legislation which is currently being considered in Washington, California, New York and Colorado, and will restrict and regulate 3D…
Update - 2/20/2026: If you care about the future of 3D printing… Please inform yourself about the legislation which is currently being considered in Washington, California, New York and Colorado, and will restrict and regulate 3D…
These are the latest version (v 2.2) of my lidded Gridfiniy bins, with several improvements over the 1st version. These include the following improvements and new elements: Fully redesigned bins with a more efficient use of material…
UUpdate 7/18/2025: You can find the latest version of this design, which includes a desiccant holder at the link below: https://makerworld.com/en/models/1613938-gridfinity-watch-stand-with-desiccant-holder#profileId-1702837 This is my 2nd…
IMPORTANT UPDATE - PLEASE READ: 11/8/2025: There is a newer version 3.0 of this case, which was just released, and is linked below. The new version 3.0 design has a number of updates and improvements over this version 2.3 design, and is…
6/29/2024: There is a new version 2.3 of this case with the following improvements: Thicker and wider gasket New mounting cleat system (which can be previewed on this design) No changes to the overall dimensions of the case Available in…
This is USB cable organizer meant to be wall mounted. There are 3 versions which have different wall mounting options: The first is plain, and can be mounted with double sided tape. The 2nd design is for use with 3M command strips , it…
These are the latest version (v 2.2) of my lidded Gridfiniy bins, with several improvements over the 1st version. These include the following improvements and new elements: Fully redesigned bins with a more efficient use of material…
Update 7/18/2025: You can find the latest version of this design, which includes a desiccant holder at the link below: https://makerworld.com/en/models/1613938-gridfinity-watch-stand-with-desiccant-holder#profileId-1702837 Description…
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these models at your own risk. This is not really a remix of HLMAX's Coraline Button Key (…
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these at your own risk. Dummy13 may not have the right stuff to go to the moon, but that's OK,…
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these at your own risk. This is a simple cinder block for Dummy 13. It is not designed as an…
This is the updated V3.3 Version of the 16 BIN (4x4) 6U Gridfinity Box for Stuff. This is designed to fit on an Ender3 size bed (the footprint is 196x214mm). This is 16 bin version of the 20 bin Gridfinity Box For Stuff. See the 20 bin…
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these at your own risk. Dummy 13 needed something to ring in the new year, and so I made it a…
These are the latest version (v 2.0) of my lidded Gridfiniy bins, with several improvements over the 1st version. These include the following improvements and new elements: Fully redesigned bins with a more efficient use of material…
Update 9-5-2020: There is a new model which includes a battery status indicator here: https://www.printables.com/model/408484-black-decker-20v-max-regular-or-extended-50ah-batt This is a collection of battery and battery charger holders…
THIS IS UNTESTED - PRINT AT YOUR OWN RISK (but please provide feedback if you do). Version 2.4 (2/20/2025) small update to fix incorrect plate descriptions in the 3mf profile. The current profile is…
These are for the Stanley 014725R 25 compartment organizer. RELATED THINGS: Stanley 014725R organizer - large 3 compartment bin with lids plus 4 bins https://www.prusaprinters.org/prints/79588 Stanley 014725R organizer - medium 3…
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these at your own risk. If you find these for sale on Amazon , Etsy or anywhere else, they are…
This is a 120mm fan grill with slats to direct the airflow in one direction. Category: Electronics If you find these models useful, please post a like or a comment with some pics of your prints. You can find the other things I'm working…
There is an updated bin design which has latching lids available at the links below (under “Other Stuff”). The version here does not latch closed (it was never intended to have that function, and only has a tab). Original description:…
These are the latest version (v 2.2) of my lidded Gridfiniy bins, with several improvements over the 1st version. These include the following improvements and new elements: Fully redesigned bins with a more efficient use of material…
This is a mini version of my Box For Stuff . This case is designed to fit on a Bambu A1 MINI or Prusa Mini size printer with a 180x180mm bed. I don't own an A1 Mini, but I did confirm that this design slices correctly using an A1 Mini…
This is the updated V3.3 Version of the 16 BIN (4x4) 12U Gridfinity Box for Stuff. This is designed to fit on an Ender3 size bed (the footprint is 196x214mm). This is 16 bin version of the 20 bin Gridfinity Box For Stuff. See the 20 bin…
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these models at your own risk. Update 10/26/2024: You can find some new Halloween beads,…
This is a mini 1x2 version of my 4x4 Gridfinity Box for Stuff (v3.3) 6U and 12U, and is intended for folks who want to test the fit of parts before going all in on a much longer print of the larger boxes. The assembly is the same, but due…
The audio jack on my PC is hard to reach so I made this extender which I mounted under my standing desk. It uses a cable strain relief boot that I printed in TPU, and I recommend using TPU for the cable boots. However, since TPU is still…
There is an updated Version 2.1 of this model, which uses filament hinges. I recommend trying the filament hinge model over this version, since it is much easier to assemble. You can find the updated version at the link below:…
Update 7/18/2025: You can find the latest version of this design, which includes a desiccant holder at the link below: https://makerworld.com/en/models/1613938-gridfinity-watch-stand-with-desiccant-holder#profileId-1702837 Description…
This is a holder for an Amazon Fire Stick Remote. The design was inspired by CRSC's version here ( https://www.thingiverse.com/thing:4689662 ), though I was unable to use that model to remix from and just redesigned it from scratch. The…
This is a quick remix of Sneaks cool looking Metric screw measuring tool ( https://www.prusaprinters.org/prints/3408-quickly-measure-sort-m2-m3-m4-m5-metric-screws-up- ). The only difference is that this is designed to use nuts which can…
There are many storage boxes out there, but this is my Box For Stuff (Updated to version 2.1) . Presented here is the basic, barebones model, with no bells and whistles, but there are other remixes for Gridfinity 20 bin or 25 bin boxes,…
There is an updated bin design which has latching lids available at the links below (under “Other Stuff”). The version here does not latch closed (it was never intended to have that function, and only has a tab). These are single…
This is a remix of my original filament guide, and my filament drybox pass though. The primary improvement over the original is that this uses a 17.8 x 2.4mm o-ring around the ball, which should seal it better and also makes it a lot…
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these models at your own risk. This is just some beads I made for a bracelet. The cord looks…
This is a Remix of my USB cable organizer meant to be wall mounted. This version is designed for thinner USB cables, with holes that are 4mm wide (the original model has 5mm holes). Similar to the original models, this one also has…
This is a collection of battery and battery charger holders for the Black and Decker 20V MAX Batteries (both regular size and extended 5.0Ah batteries). These differ from the original models here (…
This is an update to an earlier model which was posted here, but there was some positive feedback on Reddit to improve the model. I took the helpful feedback (thanks arne_mh), and this is the result. This is specifically designed for the…
11/10/2024 - I'm planning to remove this model in 60 days, so it will only be available on MakerWorld. The reasoning is that this design is Bambu specific, and maintaining the design on one site is much easier than having to update two…
This is a thicker version of Anders664PI's (Awesome) Stickman Bookends (Thanks to him for posting it). There are 2 versions, one has a cracked "wall" and the other is plain. STEP file is included. These should be printable without…
The small debris which my printer creates was getting out of hand. I normally dyson out my enclosure after a print to clean up the scraps, but thought a small bucket may be a simpler solution. I designed this to stick on the side of the…
This is a 2" (or up to 55mm) wide label holder, which is designed to hold a spool of labels which is up to 60mm in diameter, with a 25mm hole for the tube. The labels I am using are dissolvable labels for food containers such as these ,…
This is a Remix of my USB cable organizer meant to be wall mounted. This version is designed to support both normal sized and also thinner USB cables (in different slots), with holes that are 4mm wide and some that are 5mm wide. Similar…
This is a charger holder for Black and Decker 20V batteries. These tend to get scattered around since they are small, so I made this to keep them organized. These also include a cable management channel to keep that organized. There are…
This is a remix of "Frank_The_Tank's" remix of "Rssalerno's" Keystone Punchdown Holder. https://www.thingiverse.com/thing:3356887 Which IIRC is a remix of rssalerno's "Keystone Jack Punchdown Holder":…
Update 12/14/2019: The TrophyBase-with-plate7E1 STL and STEP files were updated with version TrophyBase-with-plate7E2b. The only change is a small chamfer on the support inside the base which may help with keeping the center support from…
This is a Bowden Tube coupler which uses (2) PC4-M10 pneumatic fittings on both ends. I designed it so I could easily open up the tube which goes into my printer enclosure and connects to my BMG extruder. I gonna see if I can integrate a…
This is a remix of Greys' Flexture Cat6* Cable Comb , which allows using large 3M Command Strips for mounting. This is the version that can hold up to 12 cables. There is a 3MF Bambu Studio profile included, which has 4 of these set up on…
1/12/2025 - This design will no longer be updated here on Printables. Since it is a Bambu Specific design, I plan to keep the version over on MakerWorld updated. You can find the latest version of this design here:…
First, this is not supposed to be political, but you can make of it what you will, I don't care. \_ (ツ)_/ This is the Shruggie or "Presidential Medal of Excellence" which is one of the highest honors of Nerdom, or so I have heard. When…
This is a remix of my "Stanley 014725R organizer - large 3 compartment bin with lids plus 4 bins" below: https://www.printables.com/model/79700-stanley-014725r-organizer-large-3-compartment-bin- Everything in that design applies to this,…
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these models at your own risk. This bin is designed to work with the Gridfinity Box For Stuff…
This is a quick remix of PacoDeth's cool organizer for the cheap Harbor Freight 40 Piece socket sets: https://www.thingiverse.com/thing:4462590 HOW TO TELL IF YOU NEED THIS REMIX If you have an older set and want to see if you should…
This is a “wall wart” style mount for a Tapo C120 camera . These cameras offer a good bang for the buck, but the stock magnetic mount seems a bit lightweight. I needed to mount several of them outside, and felt the need for a more robust…
This is a remix of the following parts. I literally smooshed them together and added some holes and a few chamfers: Bracket vernier calliper (Peg mount) ( https://www.thingiverse.com/thing:2866877 ) by ArneBanane Pegboard 2 position blank…
This has been tested and works. This is a quick remix of the original model here: https://www.printables.com/model/79701-stanley-014725r-organizer-medium-3-compartment-bin Everything in that design applies to this, except that this is…
This is a remix of SalsaVerdeByTheGlass's awesome "Rack for BFS - 20 Bin" over on MakerWorld , and is fully compatible with the original design. This design builds on the original with sizes for 9U and 12U cases. Use superglue when…
I split this off my other thing ( https://www.printables.com/model/79702-stanley-014725r-organizer-bin-dividers-with-step-f ) which is a bunch of organizer dividers for the Stanley 014725R 25 compartment organizer. This model is an insert…
This is a customizable insert for the MINI Box For Stuff v1.3 (fits A1 MINI / Prusa Mini size printers). These models are blank, and REQUIRE customization. This is being posted so that folks can customize the insert modules for the MINI…
I have now updated the files and will take this out of work in progress. UPDATE 3-6-2021: I remixed this due to some issues folks have reported with the hinges. I printed several of the original version (the one here) and have not had…
These are some alternate hardware parts for the Boxes for Stuff cases. They were designed to assist if problems are encountered due to lack of correct hardware or less than optimal surface finish (which could cause problems with fitting…
I do not own, and have never built a Box Turtle. This design was a request by a Voron builder who was also building a Box Turtle filament feeding system. The gearbox covers in original design (which cover the wheels and have a decorative…
This a requested remix of my “ Headphone / Audio Jack Extender (Under Desk or Wall Mount) ” designed without the mounting holes for screws. Most folks will probably want to use the original design if they plan to mount under the front…
This is a quick remix of Madox's Filament Clip ( https://www.thingiverse.com/thing:12516 ) and Shermluge's Christmas Light holder for rain gutters ( https://www.thingiverse.com/thing:3204558 ). There are two clips, each is used to hold…
This is a remix of my Audio Jack Extender (https://www.prusaprinters.org/prints/79597-headphone-audio-jack-extender-under-desk-or-wall-m), but I added a USB 3.0 Hub to it. The whole thing mounts under the controller for my uplift desk…
This is not really a Remix, but it goes with the awesome Chuck Norris bust - "Chuck Norris portrait" by Vodkazoda . It's a base or plinth for the bust, and has a name plate which can be printed separately and glued on. To use this, the…
These are a trio of Halloween themed “toppers” for some Solar Yard RGB LED lights I found at Harbor Freight ( https://www.harborfreight.com/solar-decorative-led-lights-3-pc-69462.html ). There are similar lights on Amazon and other sites…
Use these at your own risk. These are small versions of mask savers and should fit kids, but if you use these for yourself or on kids it is at your own risk. Please be responsible with them and do not use these on young kids that cannot…
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these models at your own risk. This is a 2 part “Shutdown” button. It was designed for a 0.4mm…
"This is my first contribution, made the model for a co-worker who requested it and thought I should put it up here and share it. This is designed to be printed with black, then an alternating lighter color, and black again so the "text"…
This is not meant to be printed, but it is a design element that can be helpful in making weapons or other small parts for Dummy 13. This element and similar ones have been used in some of my Weapons Packs. With some thoughtful designing,…
I made this as a small "stamp" to put on a few of my things, and may work it into a memorial for the best dog ever. I thought it may be worth posting for other people to re-mix or just use as-is. I added my dog's name on the ones I am…
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these models at your own risk. This is a quick dragonfly pin for a Coraline costume which I am…
This is a remix of Jpearson's perfectly fitting USB to FTDI adapter case. Thanks to DavieSprocket's suggestion to use Tinkercad to convert the original STL to an OBJ so I could work on it. I suggest printing this on it's tall side with…
This is a tool and spares case which was originally designed for my Voron printer, but I removed the logo so it can work with any printer now (or other things too I'm sure). It's similar to my Bambu Labs X1 & P1 Spare Parts Case (Version…
This is my Stoopid Test Cube, there are many like it and this one is nothing special, just a block with a square hole. Specifically it is 25mm square, 5mm high and has a 10mm square hole in the center. No science was involved in it's…
This is a work in progress only since I have not fully printed it yet, but I have printed everything that needs to fit together and it all works so I am confident it will be OK. I wanted to get this posted in time for Halloween so here it…
This is a strain relief boot designed to fit the audio jack on Sony MDR-V6 headphones (probably others as well). Because the cable used on these headphones is high quality, it does not have the strength itself and requires a cable strain…
This is a small holder for a Westinghouse power plug remote, which I'm not even sure is still being manufactured anymore. The remote holder will hold a small remote with a width and depth of 37mmx17mm and the height has to be at least…
These are just some equations for distance, time and force. I have not printed them but they should be good. I had to scale them in Cura to 70% to fit on a cr10 (8 x 0.2mm layers) and 60% should work for an Ender3 size printer (7 x 0.2mm…
This is a simple video surveillance sign, with two mounting options, one that mounts with tape and the other with #6 wood screws. I used Large 3M Command Strips (My Amazon affiliate link) to mount the tape mount version and some short ½"…
This is just a quick remix of a remix of the Bracket vernier calliper (Peg mount) ( https://www.thingiverse.com/thing:2866877 ) by ArneBanane I updated a 3rd version to add some more clearance for the head of the screw used to install it…
This is just a simple holder for an Anker LC40 Bolder LED flashlight ( https://www.newegg.com/anker-lc40-hand-held-black/p/054-01ZZ-00017 ) and was inspired by (though not remixed from) twoforcemember's awesome LC90 Flashlight Holder (…
This is a split and keyed version of the Shruggie McShrugFace (Shrugman) Desk Thing (with STEP file). The key is going to be a tight fit with 0.3mm clearance all around and 0.5mm clearance front to back. I also uploaded a smaller version…
THIS IS UNTESTED, PRINT IT AT YOUR OWN RISK (but if you provide feedback with specific dimensions, I will try and adjust the model if needed). This is a remix of my “ Filament Passthrough for an Ikea (TINGBY) based enclosure ”, but…
I see people on TV quite often, who seem to think a mask should protect their chin or other parts of their face. I am not sure if it is a widespread thing in the real world, since I don't get out much anymore, but in case it is, this…
This is just a simple Walking Man magnet, which I use to track daily walking activity for a family member going through PT. The magnet is very small (15.3 x 15.3 x 4.9mm), so I can place them on a calendar page, and they use a 6x3…
This is a wall mount holder for a Greenlee GT-16 Non Contact Voltage Detector. I'm always having to go find this thing when checking outlets so I decided to make a mount for it. This seems to be a good sensor, and has adjustable…
Just an eye roll'in emoticon for the person who is just sooo cool they can't be bothered with a discussion of the finer points of 3D fused filament printing. Print Settings Notes: I have not printed this yet, and probably won't, but that…
This is a simple tribute to George Floyd's memory and the broad movement that has taken up the cause of justice and reform of policing in his name. Print Settings Notes: I have only printed the small version but I do not see any problems…
For anyone who has not seen this before, turn around. For the rest of us, I present you with our old friend, always there to bring us back down to Earth when we thought we were flying so high. Print it out and put it on your desk if you…
This is a quick remix of the original "LoD (Look of Disapproval)" which I posted a long time ago. This one is split for easier printing and has a key which should help keep it together without glue (but glue is optional). This should not…
