All models

Flower Jewelry Box

Printed in Polymaker PolyWood PLA with pastel Polymaker PLA

Kyber Crystal

Kyber Crystal for resin printing.

Print in Place Watch Box

A print in place watch box with watch holder in three sizes.

Bible Sculpture

Design to serve as a reminder to read your bible. Print and place in a visible place.

Christmas Light Bulb Tealight Holder

RGB tealight holder made to resemble the old C7 Christmas lights. Can accommodate tealights up to 38mm in diameter. The models in the photos were printed in clear PETG and PLA.

Cup of Noodles

Reduce speed for exterior layers if printing in multiple colors to avoid layer separation.

Popcorn Tub

Print this model, pop some popcorn, sit and enjoy a movie.

Book of Mormon

Designed to print and display as a reminder to read your Book of Mormon.

Grilled Cheese Sandwich Print in Place Box

Print the box. Grill a sandwich. Place sandwich in box. Keep your sandwich safe.

Christmas Fireplace Tealight Holder

Tealight holder designed to fit 18mm tall tealights. The tealight booster seat model is included if you want to print the fireplace only. Prints best when printed on its back.

MT Dew Can

Inspired by Mtn Dew. Can be used as pen holder, utensil holder or just for fun.

Ice Cream Sandwich Container

Print two of the cookie tops. Cookie tops screw into each side of the middle ice cream model. You may need to break in the treading by screwing the cookie model in and out until it operates smoothly.

Fall Pumpkins

Supports are necessary when printing the whole model.

Valentine's Day Heart Shaped Cupcake Box

Supports are necessary for the frosting top. Organic supports with top contact z distance of .35.

Folding Cell Phone Stand/Holder

A 3D-printed folding cell phone holder is a compact, portable accessory designed to securely hold smartphones of various sizes. Crafted from durable, lightweight materials like PLA or ABS plastic, it features a collapsible design that…

Tomato Soup Can Utensil Holder or Pen Holder

Can be resized to hold large larger utensil, such as wooden cooking spoons and spatulas. Resize to 103% to use as can holder. Scale model to 190% to use as a kitchen utensil holder.

Witch Ghost

Could be scaled to fit a tea light.

Hostess Cupcake Container

Cupcake top requires supports around its edges.

Prusa3D Box Remix

I have added a handled version of the box. The handle should be printed in PLA if printing the box with PETG or vice versa. PLA supports may be necessary between the box and handle if you want solid surfaces around the handle.

Coca-Cola Sign from the 1940s

The print in the photo is printer at 0.15 mm layer height, Hilbert Curve fill pattern in five colors.

Prusa XL Screen Guard for Injection Molded Screen

Supports may be needed. Model in photo was printed in TPU, Clear PETG, with PLA supports.

LED Matrix Lamp for WLED Controller

The matrix model prints best using organic supports. I have had good results printing the model in PETG with PLA supports on a Prusa XL. The LED matrix generates heat, model should be printed with heat resistant filament. Avoid using PLA…

Minecraft Redstone

Minecraft Redstone for multi color printing.

Colormix Test Cube 56-color

Slicer Compatibility Open the 3MF file in PrusaSlicer 2.9.6 beta (or any later version) that supports ColorMix virtual extruders. This feature is required for the mixed-color virtual filaments. The model is prepared for multi-filament /…

Prusa XL Sound Dampening Foot

Printed in TPU.

The Haunted Bride

Pre-painted for 3 colors.

Ghostly Pirate Captain

Pre-painted for 5 colors

Color Mixing Octopus

Octopuses are a good subject for this: curved surfaces, overlapping tentacles, and a few clearly separated regions. That lets you see how cyan, magenta, yellow, black, and white blend on both flat-ish areas and surfaces that catch light…

Moonlit Howler

Pre painted to be printed in 4 colors.

Harvest Haunt

Pre-painted for 4 colors.

Grilled Cheese Tomato Soup Can

The regular size of the model is the size of a soup can. Scale model to 190% to be used as a kitchen utensil holder.

ColorMix 5-Cone Quick Calibration Set

Recommended Use Ideal for rapid iteration when dialing in tool offsets before committing to larger ColorMix models. Print it, inspect the cone transitions and alignment, then adjust offsets as needed.For detailed step-by-step instructions…

Frankenstein's Bride

Pre-painted to be printed in 5 colors.

ColorMix Rainbow – Test & Demo Model

ColorMix Rainbow Demo A fun, simple 3D rainbow model designed to test and showcase the ColorMix feature in PrusaSlicer (2.9.6+) and EasyPrint. ColorMix lets you create dozens of new colors from just a few loaded filaments by alternating…

Magnetic Bobby Pin Holder

Requires 8 X 3 mm magnets. Pause print at 63mm height to insert magnets.

Snowflake Ornament

Model after an actual snowflake.

Dracula

Pre-painted for printing in 5 colors.

Goblin Ghostie

Pre-painted for 3 colors.

Midnight Jester Ghost

Model is pre-painted for 4 colors

Starfield Logo MMU Ready

Model works best on large printers.

The Haunted Duchess

Model is pre-painted for 3 colors.

Clown Ghost

Pre-painted for 4 colors.

Tattered Goblin Ghost

Pre-painted for 3 colors.

Woodland Wraith

Model is pre-painted for 4 colors.

Forest Sovereign

Pre-painted in high detail. Four and Five color versions. Photos show the five color version.

Snowball Pail Ornament or Christmas Decor

The Little Boo Clown

The model is pre-painted for 4 colors.

Albert Einstein

Pre-painted to be printed in 5 gray tones.

Sourdough Loaf (Pre-painted)

The model in the photo was printed using Elegoo wood tone filaments.

Rainbow Corn Cob — Color Mixing Test & Fall Decor (Pre-painted)

A kernel-by-kernel flint / Glass Gem style corn cob. Made to show off rainbow, silk, and color-mixing filaments — and to stay on the table as fall decor when the test is done. Kernels are separate rounded bumps on a tapered cob, so you…

Superhero Ghost

File is pre-painted for 4 colors.

Non-human Intelligence

Pre-painted to be printed in 4 or 5 colors.

Magnetic Paperclip Dish

Requires 12 -- 8x3mm magnets. Pause the print at the last layer before the magnet holes are cover to insert the magnets.

Cupcake

Color Mixing Test CupcakeI designed this cupcake specifically to test color mixing (Bambu Studio Color Mixing / Prusa ColorMix or similar multi-filament blending). The goal was a small, attractive model that shows off mixed colors on the…

Ghostly Princess of Halloween

Model is pre-painted for 5 colors.

OUTATIME License Plate Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 365x281.05mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.96mm and the Actual…

Berry Custard Tart

Pre Painted in high detail for 5 colors.

Pancake Stack (Pre-painted)

The glossy “wet syrup” in the photos is not printed shine — UV resin was brushed onto the syrup only so the drips look like maple and the pancakes stay matte.

Roasted Turkey

Pre-painted to be printed in 5 colors

Pugsley Addams

Pre-painted to be printed in 5 colors.

Joseph Smith Daguerreotype

Model was painted with Inka Gold paints

Holly Soap Dish

To improve the durability of the soap dish, print in TPU.

Sourdough Bread Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual…

Flatforge Goldfish

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size The model is 2.80mm thick. The region from 2.32 to 2.80mm could have a Height Range Modifier to minimize print time. #111b22 PLA…

Fall Oak Leaf Flatforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size The model is 2.16mm thick. The region from 1.68 to 2.16mm could have a Height Range Modifier to minimize print time. #080a0d PLA…

Hueforge Kiwi Slice

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 1.04mm The Max allowed Thickness is 2.8mm and the Actual…

Fosted Poplar Leaf

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size The model is 2.80mm thick. The region from 1.76 to 2.80mm could have a Height Range Modifier to minimize print time. #161f27 PLA…

Jack Frost

Pre-painted to be printed in 5 colors.