Counting matching models…
Intro Its the Eiffeltower not much to say other than this model can be printed with your glorified gluegun aka FDM printer like a Ender oder Prusa. ko-fi.com/yell3d Printsetting Scale its 220mm, 240mm upscale show be fine Layerheight 0.2…
ko-fi.com/yell3d Edit: 06.03.24: added split drawers 02.10.23: remove the magnets around the Voron logo (because they dont mate) 28.08.23: no Magnet Version, updated Image, Step Files for 20 drawers portable better drawers with slope tag…
Requires Support ! see images for Seams (aligned Setting) and Supports (auto generated) The Stanford bunny is a computer graphics 3D test model developed by Greg Turk and Marc Levoy in 1994 at Stanford University . The model consists of…
The Ender dog (SDcard gcode) without base or if you prefer Niko the puppy without dog house. (see the image, the Creality gcode clearly has the Makerbot imprint there so i refer to the original ) I've attached the gcode (with base) too,…
The other ones from here didnt fit for me, so here is the better one. Print Setting layer height preferred is 0.3 but 0.2 also works swap 1.2 swap 2.2 Color yellow black red (or any other you like) Credits: Sent the Author an mail if he…
See below for changes. Instructions use the 3mf for Orca or PrusaSlicer (PS) or apply support blockers like shown Automatic Support: enabled Support Typ: regular, snug Variable layer height: enabled (press adaptive, then smooth) walls 3…
I made a collection of bunny's mainly for eastern because its a hassle to open like dozens of thingy pages, scale and fix them, then fight the download. Also 4 models got lost thanks to people deleting their account, i think its because…
put a small drop of household oil on top of the shaft then slowly turn the screw make sure the screw is hitting the shaft and not the pulley. Requires one of the Enders long m5 and a nut. Print PLA, hot, with many walls and good 3d infill…
Notes the powerbutton fits the 16mm Ali one https://s.click.aliexpress.com/e/_DdCh0sb for the power button, put the insert in, then the ring and finally screw in the button from the front Piezo is your regular pc beeper the am312 is a 1€…
The base of the sidemounts was borrowed from the Voron Trident and adjusted to fit the Ender frame, other things made from scratch by myself. Horizontal mounts with and without Voron Logo. Low profile get a countersunk screw, see the…
Small collection of easter eggs. Stand alone or as base for other things to attach. ko-fi.com/yell3d
Remix of one Lid to fit the imho easier and faster trashcan print. Print in normal setting, can use 0.3 until the top pattern starts, see the 3mf
fixed the stem of the ribbon.3mf 45°c cut print with 10mm brim, also made a version for the other. small for Fuganater's big for MagnumDanger's
moved the old to old and added the newly in onshape created ones old stuff -------- new_din_wago.stl print this one, add a new_din_voltage-plate.stl after fixing it on the rail its a hackedit out of…
Changes removed poop emoji simplified mesh oriented and print ready
The narrow one is from a random Discord which i dont find anymore (thanks Discord Search) the wide one i made in tinkercad. Based on your printers accuracy you might want to print +/- 1 % (mine is spot on). Also take a knife around the…
Liked the model but not the way its printed so i tinkercad'ed it. It prints like on a raft and if it curls up its not bad since its only 2 layers. (easy fixed with hairdryer if PLA) Also Michael itself is pretty height (1mm) so there…
Celebrate the Year of the Snake with this stunning 3D model, created to honor the rich traditions of Chinese New Year 2025. Featuring intricate details and a vibrant design, this model captures the essence of the snake in the Chinese…
see credits. Also spools on these dont free spin so you dont get a tangle mess. 02.12.22 added Steves side mount for Voron spoolholder 20.09.22 added small side mount and retainer 30.08.22 just some new photos for side mounting since I…
2024-10-21 added different height spacers, Carto should be 2.6mm to 3mm Z distance to the nozzle added Esoterical offset measuring tool from Carto Discord (Carto's coil pcb on the “hills” and nozzle on the long flat side) this is a remix…
needed for this spool rewinder https://www.printables.com/model/750033-donor-spool-holder-with-bearings-modular-design-fo its a Bearing 6200 2RS they work, just make sure to turn on random Z seams and have your first layer and stringing…
Easy drill 2020 & 2040 extrusions for you can connect them via blind joints like Voron printers use. Uses two m5x 10 button head screws a hammerhead nut two F695 bearing (old ones are good enough) Superglue or 3x M2x10 Self Tapping Screw…
Scale the model to whatever size you like. Use as standalone or glue to something else.
see description. print in ABS/ASA/PETG, PLA on the clamps in good or better limited use
Simple, replaceable and basically free mudguard. Print it solid in whatever height you want. (optional) add your logo print flat clamp (with a vice or rubber bands) into form while hot (important for PLA!) Zip tie it to the bike when…
CAD (and stl) model of a Prusament Spool. Use to make things.
Pegs, Hooks, Tape holder for Toom Baumarkt aka TKT Shelf message me for different length or use the steps
Could not find one that i like and fit. Cover with and without Voron logo. 08.04 added closed versions
Added an opening for camera cable, Neopixel, party in the back and more Released under GPL which i cant select because of how Printables works with remixes. Please see the original for the proper license.…
changed holes for 6mm magnets added rim removed male side thicken the shell added Bridge Counterbore
CR2032 see remix for other batteries
This is a 2020 remix of the Duelling Zero internal spool roller with some additional bowden guides. Works with all my plastic and cardboard spools on my Ender3 Trident conversion (Ender3dent for short) and its a 250 build (235 bed). The…
purchased from Dold in Germany 2024-07-28 added base for led clips 2024-07-27 added forgotten “base” clip and 2 way passthru
A small cover for the wiring terminals of the Meanwell lrs-100 power supply. add brim if you want a front facing cover
hack edit, dont judge me
Securely usb power bricks in all horizontal and vertical. For EUrostecker Type C (the thin ones without ground)
Protect the seat tube while transporting your bike on a car. Made for my Eleglide m1 and fits likely others.
update with my new default base, old files attached as zip press fit any 6x2 to 6x3 magnets (up to 3.2) instead of dealing with glue
Couldn't find an simple one so i made my own that i can adjust as i need. You need https://openscad.org its free and runs on Windows and Linux. Editing the file is simple, just change the numbers in line 2 to 15 as you need. Press F5 (or…
:) quick edit in tinkercard, this is the source of the image, see remix for the source of the cube https://www.thingiverse.com/thing:4301446
This one here is or Trident R1 only R2 is here This is a V2 of my first version which still runs fine in my trident but adds a couple of QoL improvements smaller Z height so there is room to route cables below, also fits nicer with the…
Remix for ease of use. All Credits to the original author. I print mine with the 0.6 version in PLA to keep the connectors on the Drybox and BMG straight. (The 1.0 is the original, totally unchanged, might as well take it) Fits the BMG…
Print, Like and post a make please <3 Protip: put a WLED with a motion sensor in it and switch from yellow to red when people come close Requires Supports for the pumpkin You can print the pumpkin with more infill for weight (or use…
used the provided Onshape in my own Onshape template thats more refined and doesnt need glue for magnets press in any 6x 2~3.2 magnets
CR2025 see remix for other batteries
made them 5mm so i can use my 10mm screws since i have plenty. Source 4.8 ish was award to use used as Part of the Ender3 to Switchwire conversion (Ender3dent)
quick Tinkercad for my Switchwire https://vorondb.com/printer/EnderWire to mount the Serial in the top left corner of Z if you dont use a screen there is also the front mounted option…
Anthead Crossbar Docks for Madmax Toolchanger These toolhead docks are designed for the Madmax Toolchanger system and are compatible with Voron Trident and similar static gantry printers. The docks mount to a 2020 extrusion oriented in…
Info All credits to the original Author, buy him a coffee or tea ;) All i did was to cut unneeded material at the top and provide print settings. You can even throw things in the middle, still holds strong. Holds all kind of writing…
Original mount was to weak to get consistent bed mesh. Klipper config for Ender3 4.2.2 mcu [bltouch] sensor_pin: ^assist:PB1 control_pin: assist:PB0 x_offset: -32.8 y_offset: -8.8 speed: 3 lift_speed: 3 samples: 1 sample_retract_dist: 8.0…
CR2450 see remix for other batteries
CR1632 see remix for other batteries
M3 simply screw into plastic, no heatsets needed. also works as middle bracer against bowing 2024-07-28 reduced depth of the heatset version, added cable passthru option 2024-07-27 added heatset version (voron) because ppl want it
CR2430 see remix for other batteries
I likes the design but it wont look good on my walls with wallpapers (is this the correct word?) or any none plain surface. So i remixed for dual colors. All credits to the original author, buy him a beer/tea/cola Swap at 1 mm with 0.2…
uploaded to easily share since discord search is pretty bad. This allows you to to sandwich a 3mm deck panel in the Y extrusion gap on an Ender while the other side is laying flat in the sides 4040's
Print in PETG, i use 4 walls, top, bottom with 30% grid infill. (single screw to flex more and be able to rotate it) Onshape link in case you want to add more holes or make it thinner…
Info Couldnt find a nice one so i made one. Printer Setting Preferred layer height is 0.3 but 0.2 also works swap 1.2 swap 2.2 (add 0.04 if your first layer is 0.24 like mine) Color White black Blue, its an info sign, isnt it ;) ? (or any…
My backplate broke so i made a fatplate annex license https://github.com/Annex-Engineering/ANNEX-Engineering-License-Agreement
ko-fi.com/yell3d 2025 Update Grab a new SDCard (a good one) flash the 3.0.0 image MINIMAL https://github.com/bigtreetech/CB1 see release right hand for download link see bottom of the github for instructions when configuring name your use…
This is a Remix of the 3030 no tape 60mm fan mount by csch0 over at github
Smaller version 1 to 5 and i like to pop it onto magbar or other metal surfaces. press in 3x6 magnets. 2 are enough and they need to be forced so they don't get lose.
open box plug in use unplug close lid yeah, why drilling or make a new cap when you can simply reuse the sealed opening. Printed in PETG for some extra self-lubrication. I also made the mistake drilling my Ikea boxes but all of my…
0.3mm layerhight + brim ~ 20% gyroid infil or whatever your like push the file it while its hot
made in onshape https://cad.onshape.com/documents/6798a2838b4fb98ec87d628e/w/32dd307331f3e6f5966ba041/e/a7b374dfca2fc97ebf1bc0dc 5 and 6mm in 120 and 150 outer diameter, use onshape to generate different Note: split the file in slicer to…
Just cut off the side part as its should be strong enough. Also Tridents usually run inverted electronics ;) Voron part is shared under the original License, see their github. https://github.com/VoronDesign/Voron-Trident/blob/main/LICENSE
Info Couldnt find one so i made one. 3D printing HowTo Step 1: Read the manual Step 2: fear the Keybak Step 3: ??? Step 4: Profit Printer Setting Preferred layer height is 0.3 but 0.2 also works swap 1.2 swap 2.2 Color yellow black red…
Mounts a BZ-10C to a 64 symmetrical bolt pattern on the drive wheel for hollowtech. For this BZ-10C https://s.click.aliexpress.com/e/_onhyE2f
quick mesh up for the long side of the Toom shelf with Action motion leds
a single low profile Wago for common ground, or simply print additional as they are no wide. requires support snug works best
print in whatever, no support required, maybe add a brim if your z isnt good DM me on Discord if you need a different size, name is .yell. (dot yell dot) or find me in Voron, Armchair, Doom discord
Like the original but cleaned and allows hotswapping loaded filament into and out of the dryer with the power of MAGNETS. using a brim is a no issue, even internal one as the faces are not critical the usual Ali/Amazon magnets are…
2026-06-27 For Trident R1 only - loses a good chunk of travel on R2 Reuses the Ender3's straight endstop pcb as a Y Endstop for Ender3dent/Trident and likely others. Mounts on top of the A/B mount and uses 10mm screws, fits regular…
For Trident R1 see this https://www.printables.com/model/1255726-trident-r1-motor-spacer-standoffs-for-leadscrew-co/ Model is for 33mm stepper body motors + 3.5mm , if yours are bigger simply cut some plastic off the top in slicer. The…
this plugs directly onto the skr to provide CAN bus functionallity via rx/tx pins. Raspberry — usb —> Skr Pico — RX/TX —> SN65HVD230 —CAN L/H —> EBB36 see this for how to flash…
prints without support, use about 20% crosshatch and 2 walls at 0.6 or 3 at 0.4. Holds tight, can use zip ties and has holes for band pegs that fit my rack. Endcaps are optional and mounts with M3x5x4 heatset and button heads. Feel free…
Replace original broken/lost feet Replace original broken/lost feet for my homeware from XXL Lutz Has build-in support, use it or remove it. The hole is for M5x30 to securely lock the feet, optional i guess.
endstops ez, why fiddle with sensorless crap. should be the same distance as a cnc sherpa + standoffs. uses with a m3x15 or a x20 if you add a 5mm thick toolhead board mount.
These are all currently available results.
